€3.69
3,69 € tax excl.
Adjustable grinder wrench with soft grip.
Max adjustable width 54 mm
Length 200 mm
Filter By
Filter By
Tools accessories
Filter By
€7.79
7,79 € tax excl.
Magnetic bit holder - Suitable for bits and bit holders - Reversible. With 1/4 "hex socket
€18.03
18,03 € tax excl.
Length/width: 1065/4.8 mm
Thickness: 0.40 mm
Teeth per inch: 15
Suitable as a replacement for SN206 band saws.
€18.03
18,03 € tax excl.
Length/width: 1085/4.4 mm
Thickness: 0.35 mm
Teeth per inch: 15
Suitable as a replacement for SN306 band saws.
€27.87
27,87 € tax excl.
Length/width: 1140/12,2 mm
Thickness: 0.65 mm
Teeth per inch: 14
Suitable as a replacement for TN85/86 band saws.
€31.15
31,15 € tax excl.
Length/width: 1302/12,2 mm
Thickness: 0.65 mm
Teeth per inch: 14
Suitable as a replacement for TN100 band saws.
€21.31
21,31 € tax excl.
Length/width: 1400/6.3 mm
Thickness: 0.35 mm
Teeth per inch: 6
Suitable as a replacement for SN208B, SN209 band saws.
€14.75
14,75 € tax excl.
Length/width: 1400/6.3 mm
Thickness: 0.65 mm
Teeth per inch: 6
Suitable as a replacement for SN208C, SN209 band saws.
€14.75
14,75 € tax excl.
Length/width: 1425/6 mm
Thickness: 0.65 mm
Teeth per inch: 6
Suitable as a replacement for SN150/208/250/308 band saws.
€20.49
20,49 € tax excl.
Length/width: 1505/6.4 mm
Thickness: 0.40 mm
Teeth per inch: 10
Suitable as a replacement for SN209/9 band saws.
€27.87
27,87 € tax excl.
Length/width: 1573/6 mm
Thickness: 0.35 mm
Teeth per inch: 6
Suitable as a replacement for SN209B band saws.
€14.75
14,75 € tax excl.
Length/width: 1630/6 mm
Thickness: 0.50 mm
Teeth per inch: 6
Suitable as a replacement for SN210 band saws.
€35.25
35,25 € tax excl.
Length/width: 1638/12,2 mm
Thickness: 0.65 mm
Teeth per inch: 14
Suitable as a replacement for TN115 band saws.
€20.49
20,49 € tax excl.
Length/width: 1712/10 mm
Thickness: 0.65 mm
Teeth per inch: 6
Suitable as a replacement for SN210P band saws.
€22.95
22,95 € tax excl.
Length/width: 2264/12,6 mm
Thickness: 0.65 mm
Teeth per inch: 4
Suitable as a replacement for SN212P band saws.
€26.15
26,15 € tax excl.
Battery Charger 18V ONEALL 2,4 A for a wide range of cordless tools with high performance lithium cells - BMS (Battery Management System) technology for intelligent battery management - Optimized charging and...
€4.84
4,84 € tax excl.
Continuous crown diamond blade for dry and wet cutting of marble and tiles. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 115 mm
Hole: 22.2 mm
Blade thickness: 2 mm
€15.16
15,16 € tax excl.
Continuous crown diamond blade for dry and wet cutting of marble and tiles. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 230 mm
Hole: 22.2 mm
Blade thickness: 2.6 mm
€6.72
6,72 € tax excl.
Diamond blade for dry cutting of concrete, stoneware, tiles. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 115 mm
Hole: 22.2 mm
Blade thickness: 2 mm
€10.57
10,57 € tax excl.
Diamond blade for dry cutting of concrete, stoneware, tiles. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 115 mm
Hole: 22.2 mm
Blade thickness: 2 mm
€26.15
26,15 € tax excl.
Diamond blade for dry cutting of concrete, stoneware, tiles. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 230 mm
Hole: 22.2 mm
Blade thickness: 2,5 mm
€19.59
19,59 € tax excl.
Diamond blade for dry cutting of concrete, stoneware, tiles. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 230 mm
Hole: 22.2 mm
Blade thickness: 3 mm
€49.10
49,10 € tax excl.
Drain cleaner for pressure washers 1520126, 1520127 and 1520128 with adapter 1520123
€27.79
27,79 € tax excl.
Drain cleaner for pressure washers 1520126, 1520127 and 1520128 with adapter 1520123
€4.60
4,60 € tax excl.
Body in plastic material - For bits from 4 to 10 mm.
€5.74
5,74 € tax excl.
For wood and plastic materials.
Width 34 mm
Useful length 40 mm
Suitable for MULTIJOB Valex, Bosch and compatible.
€67.95
67,95 € tax excl.
180 ° swivel rod - Painted steel structure.
Capacity kg / cm: 300/110 - 600/75
Net weight: 8.5 kg
€13.00
13,00 € tax excl.
Self-locking drill chuck with SDS-PLUS connection.
Minimum opening 2 - max 13 mm
1/2" threaded connection - SDS-PLUS
€12.70
12,70 € tax excl.
Reversible keyless chuck with angle connector for screwdriver or drill minimum opening 1,5 mm maximum 10,0 mm - shank connection 9 mm
€2.62
2,62 € tax excl.
Quick release magnetic bit holder with 25 mm long 1/4" shank, total length 60 mm.
€13.52
13,52 € tax excl.
Flexible spiral cable in galvanized steel - Crank for manual use and hexagonal attachment for use with drills and screwdrivers - Ergonomic handle - Ideal for unclogging bathroom and kitchen drains.
Cable length 7.5...
€9.02
9,02 € tax excl.
Ideal as a support for LED, halogen, low consumption and heating headlights.
€3.11
3,11 € tax excl.
HSS hand iron hacksaw blade
blade length - 300 mm
teeth / thumb - 24
€8.20
8,20 € tax excl.
For wood and plastic materials.Width 32 mmUseful length 40 mmSuitable for MULTIJOB Valex, Bosch and compatible.
€6.15
6,15 € tax excl.
Rubber pad with tear-off support, thread M14x48 mm, Ø 180 mm for sander-polisher.
For grinders / polishers: Valex SL1000 / 1125/1200/1201
€18.85
18,85 € tax excl.
Replacement saw blade chain, Chain bar length 10"/25 cm, Number of chain teeth 39, Chain pitch 3/8", 1.3 mm chain.
The 91PX is ideal for home maintenance and occasional use, for users who want a low vibration and low...
€21.23
21,23 € tax excl.
Replacement saw blade chain, Chain bar length 12"/30 cm, Number of chain teeth 45, Chain pitch 3/8", 1.3 mm chain.
The 91PX is ideal for home maintenance and occasional use, for users who want a low vibration and low...
€26.15
26,15 € tax excl.
Replacement saw blade chain, Chain bar length 14"/35 cm, Number of chain teeth 52, Chain pitch 3/8", 1.3 mm chain.
The 91PX is ideal for home maintenance and occasional use, for users who want a low vibration and low...
€25.41
25,41 € tax excl.
Replacement saw blade chain, Chain bar length 14"/35 cm, Number of chain teeth 53, Chain pitch 3/8", 1.3 mm chain.
The 91PX is ideal for home maintenance and occasional use, for users who want a low vibration and low...
€16.80
16,80 € tax excl.
Replacement saw blade chain, Chain bar length 8"/20 cm, Number of chain teeth 33, Chain pitch 3/8", 1.1 mm chain.
The 90PX(replaces the 90SG) is a chain with exceptional performance, ideal for small and low power...
€36.80
36,80 € tax excl.
Replacement saw blade chain, Chain bar length 18"/45 cm, Number of chain teeth 72, Chain pitch 325", 1.5 mm chain.
It requires little maintenance and stays sharp so you can get the job done quickly and easily....
€6.97
6,97 € tax excl.
Segmented crown diamond blade for dry cutting of concrete and bricks. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 115 mm
Hole: 22.2 mm
Blade thickness: 2 mm
€19.26
19,26 € tax excl.
Segmented crown diamond blade for dry cutting of concrete and bricks. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 230 mm
Hole: 22.2 mm
Blade thickness: 2.5 mm
€6.39
6,39 € tax excl.
For electric planer model: PE 1480/1500/1550/1600/1800/1810/2000.
Dimensions:
Length 82 mm
€5.74
5,74 € tax excl.
Length 133 mm
Teeth per inch 18
Suitable as a replacement for scroll saw with oscillating blade SV4000 - SV4000E - SV4001EB - SV4002EB.
€14.92
14,92 € tax excl.
Resharpenable steel blade - Ergonomic wooden handle.
Tip shape: Round 15 mm, Convex 10 mm, Slanted cut 14 mm and Angled 14, 15 mm.
Blade width 14 mm
Total length 360 mm
€9.75
9,75 € tax excl.
Excellent for cutting hard and fragile materials such as glass and ceramics - Also suitable for concrete and masonry - Carbide tip - 3-sided tang.
Measures Ø 5-6-8-10-12 mm
Length 85-123 mm
€8.20
8,20 € tax excl.
Round Ø14mm, oval Ø14mm, 2 conical Ø14mm, cylindrical Ø14mm - 6mm tang.
€3.28
3,28 € tax excl.
Set consisting of round Ø24mm, semi-round Ø14mm, cylindrical Ø25mm, conical Ø26mm, conical Ø19mm grinding wheel - 6mm shank.
€16.31
16,31 € tax excl.
To sharpen the cutting edges of the chains - A flat file with graduated template to adjust the depth limiting tooth - Graduated steel file holder - Interchangeable wooden handle.
File length 200 mm
4 round files...
€12.21
12,21 € tax excl.
Maximum operating pressure 10 bar. Ø internal/external: 6/8 mm
Dimensions: Length 15 meters
€16.31
16,31 € tax excl.
Maximum operating pressure 10 bar. Ø internal/external: 6/8 mm
Dimensions: Length 15 meters
€9.83
9,83 € tax excl.
Measure from 4-32mm. 3-surface shank diameter 10mm Suitable for expanding holes in sheet steel, aluminum, copper, plastic and composite materials
€9.02
9,02 € tax excl.
For wood, plastic materials, sheet metal (max 2mm), bricks and joints.
Width 32 mm
Useful length 40 mm
Suitable for MULTIJOB Valex, Bosch and compatible.
€13.00
13,00 € tax excl.
2 pieces of synthetic cloth cap for polisher and grinder measuring 180 mm, hook and loop fastening
€10.80
10,80 € tax excl.
2 pieces of synthetic wool cap for polisher size 240mm, fixing with twine
€4.84
4,84 € tax excl.
For petrol and electric brushcutters - Connection hole Ø 25mm - Cutting diameter 255 mm
€31.07
31,07 € tax excl.
Adjustable Ball bearing roller support, supports large pieces up to 80 kg.
Three support modes: roller, ball or smooth surface.
Adjustable height min-max: 69 - 112 cmRoller width: 28 cmNet weight: 5.4 kg
€24.51
24,51 € tax excl.
Adjustable roller support, supports large pieces up to 80 kg.
Adjustable height min-max: 69 - 109 cmRoller width: 28 cmNet weight: 4.4 kg
€23.77
23,77 € tax excl.
Adapter allows you to transform an SDS-MAX attachment into an SDS-PLUS quickly, quickly and use tips with different attachments.
Length: 21mm
Width: 33 mm
Height: 16mm
€172.13
172,13 € tax excl.
For wood lathes - Spindle external diameter 125mm - Supplied with adapter with double threaded connection.
Opening 85-145 mm
Connection M25x3 / M18x2.5
€63.93
63,93 € tax excl.
For wood lathes - Spindle external diameter 125mm - Supplied with adapter with double threaded connection.
Opening 85-145 mm
Connection M25x3 / M18x2.5
€12.87
12,87 € tax excl.
Sharpener, attachment for drills with collar from 43 mmv, for drill bits from 3.6 to 10 mm
€27.46
27,46 € tax excl.
For petrol augers: AUGER 50/52 - Connectable to petrol augers with Ø 20 mm crankshaft - Tip with hardened steel plate.
Diameter: Ø 10 cmLength: 56 cm
€34.02
34,02 € tax excl.
For petrol augers: AUGER 50/52 - Connectable to petrol augers with Ø 20 mm crankshaft - Tip with hardened steel plate.
Diameter: Ø 15 cmLength: 56 cm
€27.79
27,79 € tax excl.
For petrol augers: AUGER 50/52 - Connectable to petrol augers with Ø 20 mm crankshaft - Tip with hardened steel plate.
Diameter: Ø 20 cmLength: 56 cm
€31.07
31,07 € tax excl.
Includes:
Quick charger 1,7A
1 battery 2 Ah
€38.93
38,93 € tax excl.
Battery 2.0 Ah 18V ONEALL for a wide range of cordless tools - High performance lithium cells - BMS (Battery Management System) technology for intelligent battery management - Optimized charging and discharging for...
€8.11
8,11 € tax excl.
For petrol augers: AUGER 50/52 - Connectable to petrol augers with Ø 20 mm crankshaft.
Diameter: Ø 2,5 cmLength: 40 cm
Showing 1-69 of 69 item(s)
Italiano
Français
Deutsch
Español