€1.11
"T" plate with nails, holes, screws, pre-galvanized steel
Filter By
Filter By
Accessories for wood
€15.50
385 Combi black painted closing lever bolt system 10x10 for rod(art. 393) for wooden and iron windows
Measures looks image.
€25.00
390 Combi galvanized square closing lever bolt system 14x14 for rod(art. 394) without cylinder for wooden and iron windows
Measures looks image.
€39.19
391 Combi galvanized square closing lever bolt system 14x14 for rod(art. 394) with cylinder for wooden and iron windows
Measures looks image.
€12.82
393 Combi galvanized square Lever bolt rod 10x10 for wooden and iron windows
Available sizes: 1500-2000 mm (L)
Measures looks image.
€17.69
394 Combi galvanized square Lever bolt rod 14x14 for wooden and iron windows
Available sizes: 1500-2000 mm (L)
Measures looks image.
€23.90
Re-sharpening steel blade with ergonomic wooden handle.
Tip shape: Round 15mm, Convex 10mm, Inclined cut 14mm, Angled 14 and 15mm.
Blade width 14 mm
Total length 360 mm
€0.59
Angular heavy platelet with veining, pre-galvanized, with 6 flared holes flared
€0.15
Angular platelet with 2 screw holes, pre-galvanized
€0.11
Angular platelet with flared holes, pre-galvanized
€0.11
Angular platelet with veining and flared holes, pre-galvanized
€7.66
Supporto corrimano in ottone
Disponibile Lucido verniciato - Bronzato - Cromo satinato
On request Chrome
€7.89
Supporto corrimano in ottone
Disponibile Lucido verniciato - Bronzato - Cromato - Cromo satinato
€7.66
Supporto corrimano in ottone
Disponibile Lucido verniciato - Bronzato - Cromo satinato
On request Chrome
€48.67
Couple Floor support for wooden beams, hot dip galvanized
€3.97
Couple support to open wings adaptable to wooden beams, pre-galvanized
€40.30
Driving couple wooden drawer Movento BLUM with TIP-ON full extension concealed opening prizes - open TIP-ON
EXTRA DISCOUNT FOR PACKAGING
€25.21
Driving couple wooden drawer with Movento BLUM with Blumotion full extension concealed with soft closing
EXTRA DISCOUNT FOR PACKAGING
€15.00
Backing for round handrail.
Finish: Black zinc treatment iron
A= 65 mm Ø= 85 mm
Measures looks image.
€16.50
Backing for flat handrail.
Finish: Iron with “silver” finish
A= 65 mm Ø= 85 mm
Measures looks image.
€47.70
Guide control black powder HB-Set for visibly checking surfaces to be sanded.
Items Included:
Hand sanding block
2 guide control black powder cartridges (each 30 g)
In carton
€40.10
The SURFIX oil dispenser makes oil application clean, fast and ergonomic – and significantly more economical than using a brush or cloth. Heavy-duty wood in internal areas, e.g. kitchen worktops, furniture, parquet,...
€40.00
The SURFIX oil dispenser makes oil application clean, fast and ergonomic – and significantly more economical than using a brush or cloth. Outdoor for all woods in external areas, e.g. teak and garden furniture,...
€15.89
Floor stand with base plate for wooden beams, hot dip galvanized steel.
€5.22
FEATURES:
Mounting to be screwed
Application for Legs 38 x 38 mm
Galvanized Steel
Folding, with stop in opening and closing position
€14.00
FEATURES:
Foot Ø 58 height 250 mm with M10 threaded bush for drawers, small furnishing accessories, tables etc.
Available Natural beech.
Available with wheel:
Double wheel MACO (0589) nylon Ø 80, with rubber and brake...
€21.90
FEATURES:
Foot Ø 58 height 250 mm with M10 threaded bush for drawers, small furnishing accessories, tables etc.
Available Natural beech.
Available with wheel:
Double wheel OgTM (DISKY 2) zama Ø 80, with rubber and...
€14.00
FEATURES:
Foot Ø 58 height 250 mm with M10 threaded bush for drawers, small furnishing accessories, tables etc.
Available Walnut.
Available with wheel:
Double wheel MACO (0589) nylon Ø 80, with rubber and brake load...
€21.90
FEATURES:
Foot Ø 58 height 250 mm with M10 threaded bush for drawers, small furnishing accessories, tables etc.
Available Walnut.
Available with wheel:
Double wheel OgTM (DISKY 2) zama Ø 80, with rubber and brake load...
€1.08
Heavy rectangular plate with nails, holes, screws, pre-galvanized steel
€47.00
BLUE GROOVE 6X with penetration rate 6 times faster than standard drills. The 'Tri-Flute' design allows faster ejection and bits complete of screws are easy to use and pull. The bits are heat treated to increase its...
€11.23
BLUE GROOVE 4X Four times faster than the basic flat drill bits double Cutting Spurs scribe outside of the hole, reducing breakout.
Thicker Cutting Edge for longer drilling life. Bluegroove Point & Cutting Edge...
€0.51
Platelet for panels with step and 3 screw holes, pre-galvanized
€11.96
Rasps set of 3 pieces for roughing, roughing, scraping, sanding wood and hard materials, such as stone, marble and tuff.
Blade length 200 mm in steel, 3 shapes: round, half-round, flat - Ergonomic non-slip handle.
€0.61
Rectangular plate with nail holes, pre-galvanized
€25.62
Handrail support bracket with flat attachment 75 mm projectionmaterial in EN 1.4301 Stainless steelArt. IN.18.131Dimensions and measures shown in the images.
€0.05
Stops panel toothed platelet with hole, pre-galvanized
€4.53
Support to closed wings to wooden beams, pre-galvanized steel
€3.19
Support with open wings for wooden beams, pre-galvanized steel
€4.00
Steel wool Fine N ° 000
Steel wool with high technical characteristics of finesse and effectiveness
Ideal for multiple uses such as wax application, metal polishing, etc.
Ball of wool 150 g
Fine grain
€14.90
Office Double hinge series line, slide on fixing, 2D adjustment.
Wooden or glass door application, for double, opening angle from 180 to 240°.
Also for medical furniture items: 63001D/R5 (double hinge), 63101S/R5...
€12.90
Office Single hinge series line, slide on fixing, 2D adjustment.
Wooden or glass door application, for single , opening angle from 180 to 240°.
Also for medical furniture items: 63001D/R5 (double hinge), 63101S/R5...
€15.20
JOINER pattern manganese steel bar - carbon steel slider
Tightening working length(A) and measures looks image.
€3.40
Mini hand cramp pattern carbon steel - galvanised, Measure C= 18X6 mm
Available in these models:
06302 tightening working length 60 mm
06303 tightening working length 80 mm
06304 tightening working length 100 mm
€2.50
Angular heavy plate with veining , stainless steel A2 (AISI 304).
€0.68
Angular heavy platelet with veining, pre-galvanized, with 5 flared holes and large hole Ø 16mm
€2.50
Angular plate heavy to 135 °, stainless steel A2
€48.67
Couple Floor support for wooden beams (for corners), hot dip galvanized
€3.97
Couple support to closed wings adaptable to wooden beams, pre-galvanized steel
€2.50
Heavy rectangular plate with nails, holes and screws, stainless steel A2
€0.68
Heavy rectangular platelet, pre-galvanized with 5 flared holes and large hole Ø 16mm
€0.59
Heavy rectangular platelet, pre-galvanized with 6 flared holes
€0.68
Platelet "L" heavy with veining,pre-galvanized, with 4 flared holes and large hole Ø 16mm
€0.68
Platelet "L" heavy with veining,pre-galvanized, with 6 flared holes
€0.14
Square plate for furniture assembly with 4 flared holes, pre-galvanized
€0.21
Veining rectangular platelet, pre-galvanized with 6 flared holes
Out-of-Stock
€40.00
The SURFIX oil dispenser makes oil application clean, fast and ergonomic – and significantly more economical than using a brush or cloth. One-Step for decorative, less heavy-duty surfaces in internal areas, e.g....
Out-of-Stock
€25.99
Set COMBI assortment of mixed bits metal, masonry and wood.Box set of 15 pieces with bits:
HSS Pro(metal): 2 - 3 - 3,5 - 4 - 5 - 6 - 8 Ø mm
CORDLESS MULTI(masonry): 4 - 5 - 6 - 8 Ø mm
Brad Point(wood): 3 - 4 - 6 -...
Out-of-Stock
Out-of-Stock
Showing 1-65 of 65 item(s)
