Henkel Aquence KOR-LOK 132 emulsion adhesive
KOR-LOK 132 Suitable for wood on wood gluing, for assembly work and carpentry with hot or cold presses.
Suitable for bonding of soft and hard woods with high frequency (HF).
Available packaging: 10 kg - 30 kg
FEATURES:
Properties of Product:
- Viscosity (Brookfield, impeller 5 to 20 revolutions / min.) 15,000 mPa.s @ 23 ° C.
- Solids (1 hour at 105°C) 51,5%
- Film forming temperature 6°C
- Cleaning with water if the glue line is moist; with solvent (eg. MEK) if dry.
The KOR-LOK 132 is certified i.f.t. according to standard EN 204 Group D3 as monocomponent and as CATAS Group D4 when used with 5% hardener IS 205. The KOR-LOK 132 is tested i.f.t. according to the procedure WATT 91 and can achieve more results of 7N / mm2.
Conditions of use:
KOR-LOK 132 must be applied by roller mechanical coater or manual, brush or compressed air gun for adhesives.
- Temperature of the substrate, environment and adhesive 15 - 20 ° C
- Humidity in the wood 8-12%
- Grammage for cold pressure 100-160 gr/m2
- Pressure on the glue line (softwoods) 4 - 7 kg /cm2 (hardwoods) 9 - 12 kg/cm2
- Open time up to 5 minutes.
- Open time "closed" up to 15 minutes.
- Pressing time at 20°C at least 12 minutes.
- Pressing time at high frequencies from 45 seconds to 2 minutes.
The maximum resistance is reached after 7 days from the ensembling. Using the product with 5% hardener IS 205 must be careful not to exceed the time life of the mixture of 4 hours.
No customer questions for the moment.