How to apply them - Step by step
1. Clean the surface with a window cleaner free of silicone or denatured alcohol. Make sure the surface is dry before application
2. Apply the adhesive strip to the roughest surface. Be careful not to touch the adhesive area.
3. Apply the hook by pressing it smoothly across the surface for at least 5 seconds.
4. Make sure the tab is accessible to facilitate removal.
Versatile and without damage
Tesa Adhesive hooks for transparent and glass 1 kg are perfect for countless uses at home. The transparent adhesive hook up to 1 kg is designed for safe sealing on glass, mirrors and other transparent surfaces such as acrylic and can even be used on other smooth and solid surfaces. The transparent and unparalleled appearance makes them ideal for hanging decorations in an almost invisible way and to conveniently hang household items up to 1 kg of weight for hook. These hooks avoid using the drill or tool box. All you need is in the box.
Easy to assemble ... and remove
Installing the self-adhesive hook could not be simpler. It is only to stick the adhesive strip first to the roughest surface, then press the strip and the hook evenly to activate the adhesive bond. They hold the decoration or object for as long as you want. When it's time to change, just pull the strip parallel to the wall. This causes the polymer chains to extend inside the adhesive and releases the bond, leaving the surface free of damage or residue.
Ready for the next job
Tesa hooks for transparent and glass 1 kg fit perfectly to a lifestyle that is attentive to the environment. Removal does not mean the end of the self-adhesive hook: it can be reused. To reuse the self-adhesive hook, just buy a tire replacement kit Adhesive strips for transparent and glass 1 kg from the tesa dealer Intelligent mounting system. The strips allow you to reuse the hook somewhere else in the home with a new strip, over and over again.
Not suitable for non-adhesive surfaces.