€5.33
5,33 € tax excl.
Nylon wheel Ø 16 mm flat type
Specifications:
- Diameter 16 mm
- Thickness 5.5 mm
- Hole Ø 5 mm
80 mm round groove nylon wheel with 1 bearing 400NY.80 / 16
Reference:
400NY.80/16
Nylon wheel 1 bearing with round groove, Ø 64x80 mm complete with bolt article 400NY.80 / 16 Combi
Measurements as shown in the images.
€27.46
27,46 € tax excl.
Add to wishlist
other products in the same category:
€5.00
5,00 € tax excl.
Bearing diameter 19 mm
Pad thickness 5.6 mm
Total thickness 23mm
Thickness without screw 16.5 mm
Screw thickness 6.5 mm
Screw pitch 5MA
Bearings particularly suitable for use in shower enclosures...
€13.93
13,93 € tax excl.
Specifications:
For wooden doors maximum capacity 40 kg
Drilling: Ø 35 mm
Finish: Bronze - Galvanized
Complete kit with:
2 pieces bottom slide
2 pieces top spring guide
2 pieces upper retainers
€7.30
7,30 € tax excl.
nylon wheel 29mm round gola
specifications:
Diameter 29 mm
Thickness of 8 mm
Round throat diameter 4 mm - radius 2 mm approximately
Hole Ø 8
€4.84
4,84 € tax excl.
Nylon wheel Ø 15 mm flat type
Specifications:
-Diameter 15 mm
-Thickness 4 mm
-Hole Ø 3
€5.25
5,25 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.003.00
Specifications:
D - 12,7 mm diameter
P - Thickness 5 mm
B - Hole Ø 4,76 mm
€5.00
5,00 € tax excl.
Wheel diameter 19 mm
Pad thickness 5.6 mm
Total thickness 10mm
Hole with 4MA pitch
Bearings particularly suitable for use in shower enclosures
Materials:
Nylon coated brass outer ring
Brass pin...
€8.33
8,33 € tax excl.
Tropicalized steel pulley for RT Rolling Center rope.
Used in overhead door mechanisms, garages, automatic openings, automation systems, rope handling, traction of objects, etc...
Pulley diameter: 60-80-90-100-120...
€1.64
1,64 € tax excl.
Ball bearing wheel in PA suitable for sliding furniture drawer runners etc.
- Diameter 23 - 25 - 28 - 30 mm
€6.15
6,15 € tax excl.
Bearing wheel for sliding shower enclosure door.
- Wheel Outer Diameter: 28 mm
- Wheel Inner Diameter: 6 mm
- Wheel thickness: 7 mm
FEATURES:
High load capacity, very resistant product
For glass doors of...
€4.84
4,84 € tax excl.
Bearing wheel for sliding shower enclosure door.
- Wheel Outer Diameter: 23mm
- Wheel Inner Diameter: 5mm
- Wheel thickness: 7mm
FEATURES:
High load capacity, very resistant product
For glass doors of...
€6.97
6,97 € tax excl.
Adjustable built-in sliding trolley with Ø 20 mm nylon wheel, round groove and safety device to prevent the trolley from coming out of the track for cabinet door, plastic half-moon 75x35 mm support.
Specifications:...
Out-of-StockSold out
€3.28
3,28 € tax excl.
FEATURES:
Finish: Double color Light grey/Dark grey
Material: Nylon
Measures: Ø 80
Pins: E-L-P3
Capacity: Kg.60
Measures looks image.
€6.48
6,48 € tax excl.
nylon wheel 25mm round gola
specifications:
Diameter 25 mm
Thickness of 8,5 mm (thickness 10 mm with bushing)
Round throat diameter 6 mm - radius 3 mm approximately
Hole Ø 5
€9.02
9,02 € tax excl.
Nylon wheel Ø 27 mm with bearing and V-groove
mounted on a 6ma threaded pin
Specifications:
Diameter 27mm
8mm thick
Round throat width 4mm - depth 2mm approx
15mm long stud with 6m x 10mm thread
Out-of-StockSold out
€5.00
5,00 € tax excl.
Materials:
Outer rings and pins in AVP steel - Coating in Nylon 6/6 loaded with fiberglass - Balls in Cr TMP steel.
- Wheel diameter 22 mm(D),
- Internal hole diameter 6 mm(d),
- Inner ring diameter 10...
€22.13
22,13 € tax excl.
Round groove grooved wheel - O2 in iron for normal C45 sliding gates with 2 Rolling Center bearings
Measurements as per images.
€12.21
12,21 € tax excl.
Solid anti-puncture wheel in polyurethane with roller bearing hub for trolley.Wheel size ØxL 250x72 mmCapacity 100 KgWheel hole ØxL 20x74 mm
€26.23
26,23 € tax excl.
V-groove grooved wheel - V2 in iron for normal C45 sliding gates with 2 Rolling Center bearings
Measurements as per images.
€7.26
7,26 € tax excl.
Nylon wheel D.60x17 throat V C / Cusc. bolt M10 and 2 bushings, Article 617VN for gates and low noise grates
€4.84
4,84 € tax excl.
System ROLL-GE 20, Adjustable steel roller with M10 pin.
Wheels Ø 24 mm, material:
Steel (Art.23), Steel-nylon (Art.45), Delrin (Art.1223) to complete crown of spheres.
Carrying capacity: 45 kg (Art.23) - 45 kg...
€49.10
49,10 € tax excl.
Article 489/E
Spring support wheel for swing gate
IBFM article 489/E
Capacity: 150 Kg
€7.38
7,38 € tax excl.
nylon wheel 30 mm round gola
specifications:
Diameter 30 mm
Thickness of 10 mm
Round throat diameter 6 mm - 3 mm approximately
Hole Ø 5
€19.67
19,67 € tax excl.
Wheel with round groove grooved support - PSO in iron for normal C45 sliding gates with 2 Rolling Center bearings
Measurements as per images.
€4.10
4,10 € tax excl.
Wheel with G Groove, used for bathroom sliding doors, shower doors etc.
Material: Nylon Wheel, Brass Core
Total size: 10.5x22.5 mm
Thickness: 6.8 mm
Weight: 60g
Groove width: 5mm
Thread: M4
Length of the...
€7.30
7,30 € tax excl.
U-shaped support in tropicalized iron 50 x 26 x 15 mm
Nylon wheel Ø 30 mm Round groove
Specifications:
Diameter 30 mm
Thickness 10 mm (Thickness with bushing 11 mm)
Round throat diameter 6 mm - radius 3 mm...
€17.29
17,29 € tax excl.
Rolling Center PSV wheels c45 with 2 bearings support - V groove
Measures looks image.
€20.49
20,49 € tax excl.
Inflatable rubber wheel, ball bearing hub for trolley.
Wheel size ØxL 260x75 mm
Capacity 130 Kg
Wheel hole ØxL 16x50 mm
€4.92
4,92 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.004.00
Specifications:
D - 19 mm diameter
P - Thickness 7 mm
B - Hole Ø 6,35 mm
€2.52
2,52 € tax excl.
Ø 24 Omge rubberized rounded bearing,
with 6 mm thickness and 11 mm inner hole
€11.48
11,48 € tax excl.
FEATURES:
Foot Ø 58 height 250 mm with M10 threaded bush for drawers, small furnishing accessories, tables etc.
Available Walnut.
Available with wheel:
Double wheel MACO (0589) nylon Ø 80, with rubber and brake load...
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Italiano
Français
Deutsch
Español