€442.54
442,54 € tax excl.
Fini Compressor MK Advanced 50 Litre single-stage two-cylinder single phase
Fini Compressor MK Advanced 90 LT
Reference:
BMGC404FNM507
Fini Compressor MK Advanced 90 Litre single-stage two-cylinder
€490.16
490,16 € tax excl.
Add to wishlist
Lubricated belt-driven single-stage two-cylinder compressor with engine of 1,5 kW. Wheeled tanks to simplify the transport. Electro-mechanical pressure switch, pressure reducer with manometer and universal quick coupler. The electric motor features overload protection with manual reset.
You may also like
€425.41
425,41 € tax excl.
Fini Compressor MK Advanced 25 Litre single-stage two-cylinder single phase
other products in the same category:
€66.42
66,42 € tax excl.
Compact and lightweight Labyrinth construction to protect bearings from dust Sealed bearings Armature and stator with anti-dust paint Reduced noise level Grease leakage protection 360° adjustable...
€937.88
937,88 € tax excl.
Characteristics: 30 mm hexagonal connection AVT vibration reduction system Electronic speed regulator LED signal indicating the wear of the brushesTechnical data: Power absorbed 1510 W Shot power 25...
€539.35
539,35 € tax excl.
Characteristics: Beam planer Replacement of brushes from the outsideTechnical data: Removal capacity 0-2.0 mm Plate length 530 mm Power absorbed 1200 W Idle speed 15000 rpm Ø Intake Ext. 70.5 mm /...
€39.26
39,26 € tax excl.
Valex 180 W multifunction for cutting, sanding, scraping
€130.74
130,74 € tax excl.
Carry 1801 cold pressure washer
Overload protection with automatic reset - TOTAL STOP SYSTEM: when the gun lever is released the pressure washer stops to avoid waste - Steel pistons - High quality metal pump -...
Out-of-StockSold out
€783.93
783,93 € tax excl.
Protool saw raiper UniverS 1600W SSP200EB, 1600W, cable length 7.5 m, cutting depth 200 mm
€115.42
115,42 € tax excl.
Makita UC4041A Electric Chainsaw 1800W 40 cm
Ergonomic soft grip
New adjustment lever for easier tool-less saw chain/tension adjustment
New design harpoon
Technical data:
Chain Pitch 3/8"
Max cutting width...
€131.97
131,97 € tax excl.
GA5040CJD1 angular grinder, side handle, service key and makpac case.
New Super Joint System II (SJS) Elastic Transmission System
New gear box and impact resistant
Anti-restart function
Slow start and constant...
€245.08
245,08 € tax excl.
Features:
Ergonomic handle
3,2° of oscillation
Accessory insert on 12 different positions
Speed adjustment
Constant speed under stress
Slow start
Technical data:
Power consumption 320W
No-load speed...
€291.37
291,37 € tax excl.
-Long aluminum collar for machining in molds
Constant speed under stress
-Adjustable speed
-New Super Joint System (SJS) elastic transmission system
- Speed control
€17.95
17,95 € tax excl.
Can be powered from the charging station or directly on the gun. Interchangeable nozzle.
Power 15(80)W
Glue stick Ø 12 mm
Extrusion 15 gr/min
Heating 5 minutes
Temperature 190°C
Net weight 0.440 Kg
€163.84
163,84 € tax excl.
Features:
Double sealed bearings, dust protection
Ergonomic handle
Quick blade engagement
Self-releasing brushes
Voltage 220 V
Power consumption 1200 Watts
Dim.lxwxh 447x97x176 mm
Cable length 4 m
Weight...
€33.44
33,44 € tax excl.
SA52 angle grinder
Disc lock button - Safety switch against accidental ignition - Adjustable disc protection - Front handle fixed in 3 positions.
€96.53
96,53 € tax excl.
Heat gun 600°, 1800W Makita HG6031VK
- Double temperature setting
- Two speeds
- Speed 1: 400° for forming
- Speed 2: 600° for heat shrinking, paint removal, welding and hardening operations
- Ergonomic handle...
€369.00
369,00 € tax excl.
Body only Handy-Giraffe sander.
Ideal for use on small surfaces and confined spaces, sanding plasterboard panels, panels in thermal insulating polystyrene and for preparation for painting. Equipped with an innovative...
€479.51
479,51 € tax excl.
Lucidatrice angolare Fein WPO 14-15, con impugnatura antivibrazione e regolatore numero di giri
€44.67
44,67 € tax excl.
Instantaneous adjustable soldering iron 200W
€59.75
59,75 € tax excl.
Valex trimmer F401V 400W, Spindle Ø6mm, millimetric adjustment of the milling depth.
With guides for parallel, circular milling, copies of profiles.
€1,141.57
1.141,57 € tax excl.
Makita HB500 drill press magnetic base
Features:
Specifically designed for drilling in steel and metals in general in steel and construction carpentry
Technical data:
Power consumption 1150WNo-load speed 350-650...
€638.52
638,52 € tax excl.
Bosch GSG 300 foam rubber cut professional
NOT INCLUDED BLADES AND BLADE GUIDE
€149.67
149,67 € tax excl.
Characteristics: Engine brake and electronic switch LED illumination of the work area which remains lit when the tool is still powered Soft non-slip handle A tool with particularly compact dimensions...
€92.99
92,99 € tax excl.
Characteristics: Ergonomic handle with soft grip covering Effective dust extraction through the support plate Speed regulator Paper clip Aluminum supports Constant speed under loadTechnical data:...
€409.02
409,02 € tax excl.
Characteristics: Diamond disc saw for wet cutting of marble, stone, granite and tiles Equipped with a lifesaver for safe use Self-detachable brushesTechnical data: Diamond blade Ø 125 mm 90° cutting...
€415.36
415,36 € tax excl.
Makita JS3201J shear
Extended warranty for 3 years
Features:
Knife System with 4 cutting edgeshand protection for user safety during cutting
Technical data:
Steel cutting capacity 2.5 mmsteel cutting capacity 1.5...
€681.05
681,05 € tax excl.
Characteristics: Handle and machine body covered in rubber Reversible Powerful motor for intense and prolonged use Brushes accessible from the outside Hook for hanging toolsTechnical data: Bolt...
€54.84
54,84 € tax excl.
Valex 450W round palm sander LR130
Paper size 125 mm diameter with velcro attachment
Variable speed with speed preselection - Combined orbital and rotary action - Soft grip.
- power W 450
- rpm at no load...
€388.79
388,79 € tax excl.
Characteristics: Quick blade attachment Equipped with LED lighting Speed regulator Using jigsaw bladesTechnical data: Wood cutting capacity 55 mm Steel tube cutting capacity Ø 25 mm Blade stroke...
€192.62
192,62 € tax excl.
Characteristics: Removal capacity from 0 to 2.5 mm Quick replacement of knivesTechnical data: Removal capacity 2.5 mm Rebate capacity 9 mm Plate length 285 mm Power consumption 620 W Idle speed...
€676.23
676,23 € tax excl.
Utensile Multifunzione Fein FSN400 con regolatore numero di gir
Dotazione
Utensile multifunzione FSN400
Staffa di protezione mano e macchina
Vite per fissaggio utensile
Chiave per dadi a 2 fori
Pietra affilatrice
€145.90
145,90 € tax excl.
Valex Galazy 126 inverter ventilated welder
€108.16
108,16 € tax excl.
Makita UC3541A Electric Chainsaw 1800W 35 cm
Ergonomic soft grip
New adjustment lever for easier tool-less saw chain/tension adjustment
New design harpoon
Technical data:
Chain Pitch 3/8"
Max cutting width...
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Italiano
Français
Deutsch
Español