€111.39
111,39 € tax excl.
Valex Team 24 lubricated coaxial compressor
1,5 Hp engine
Tank 24 lt
Maximum pressure 8 Bar
Virutex AG98F Manual edgebander 1500W
Reference:
AG98F
Virutex AG98F Manual edgebander 1500W
For edgebanding preglued PVC, melamine and veneer. Enables banding of circular or shaped pieces. Its special design with adjustable clamps ensures high precision work with great stability. A practical edge trimming system included. The possibility of surface glueing or with excess on either of the two sides. Set up time: less than one minute.
€561.97
561,97 € tax excl.
Add to wishlist
Technical data:
- Double insulation
- Input power: 1.500 W
- Maximum banding width: 50 mm
- Temperature I: 300°C
- Temperature II: 525°C
- Air delivery: 400 l/min
- Weight: 2,7 Kg
other products in the same category:
€335.65
335,65 € tax excl.
Suitable for the preparation and mixing of high viscosity materials such as mortar, plaster, cement, quartz cement, lime, epoxy resins, gypsum and granulates up to a quantity of approximately 80 kg.Characteristics:...
€696.72
696,72 € tax excl.
Portable bench saw 2712 for construction sites 315 mm designed and made for meeting the Needs of the construction sites. Convenient and practical, easy to use as well as in transport thanks to the wheels, perfect...
€1,000.00
1.000,00 € tax excl.
- No-load speed: 3,200rpm
- Power consumption: 1.800Watt
- Dim. Lxwxh: 898x664x725mm
- Cable length: 2.5m
- Weight (EPTA): 29.5kg
- Ø blade: 305mm
- Blade hole: 30mm
- DXT deep & exact cutting technology.
-...
€199.00
199,00 € tax excl.
Characteristics:
Electric blade brake
Double switch that simplifies its use vertically
Non-slip soft grip
€154.92
154,92 € tax excl.
Features:
Double insulation
2 mechanical speed levels: 0-1,200 and 0-2,900 rpm
2 functions: rotation, rotation and percussion
Robust aluminum housing for the gear drive
Safety clutch for stopping the motor if...
€204.10
204,10 € tax excl.
Suction of solids max Ø 40 mm - Also works partially submerged - Stainless steel and cast iron body - Cast iron impeller - 2" hose connection - Ideal for emptying construction excavations or biological tanks -...
€92.99
92,99 € tax excl.
Characteristics: Ergonomic handle with soft grip covering Effective dust extraction through the support plate Speed regulator Paper clip Aluminum supports Constant speed under loadTechnical data:...
€238.23
238,23 € tax excl.
Characteristics: Large-amplitude orbital movement for complete abrasion Possibility of dust extraction via bag on with connection to the aspirator Abrasive fixing with both Velcro and hookTechnical data:...
New
€422.13
422,13 € tax excl.
Features:
Anti-restart function minimises accidental start-up
Soft start feature for smooth start-ups
Quick release plunge depth adjustment with micro control along with 3 preset depth stops for added precision...
€91.80
91,80 € tax excl.
High torque for drilling, mixing glues, paints, plasters, mortars etc. - Rack spindle Ø13mm - Die-cast aluminum gearbox - Push button for continuous use - Possibility to use M14 whips.
- power W 1050
- rpm at no...
€92.21
92,21 € tax excl.
Features:
Paper fixing with hooks
Power cord 2 mt
Max Power Output 200W
Vibrations per minute 14000 min⁻¹
Backing pad dimensions 112x102 mm
Sandpaper dimensions 114x140 mm
Sanding orbit diameter 1.5 mm...
€69.96
69,96 € tax excl.
Heat gun 500°, 1600W Makita HG5030K
- Double temperature setting
- Two speeds
- Speed 1: 350° for forming
- Speed 2: 500° for heat shrinking, paint removal, welding and hardening operations
- Ergonomic handle...
€33.44
33,44 € tax excl.
SA52 angle grinder
Disc lock button - Safety switch against accidental ignition - Adjustable disc protection - Front handle fixed in 3 positions.
€937.88
937,88 € tax excl.
Characteristics: 30 mm hexagonal connection AVT vibration reduction system Electronic speed regulator LED signal indicating the wear of the brushesTechnical data: Power absorbed 1510 W Shot power 25...
Out-of-StockSold out
€515.57
515,57 € tax excl.
Smerigliatrice rettilinea a dito, con preselezione continua del numero delle corse mediante rotella di regolazione
€548.36
548,36 € tax excl.
Drill press with drive belt Art. 0757 with swivel and reclinable table.
FEATURES:
Self-centering chuck MT 2 - ø 16 mm
Spindle travel 80 mm
Height 1000 mm
Distance chuck-column 430 mm
Table dimensions ø...
€73.69
73,69 € tax excl.
Vacuum cleaner with 4 swivel wheels - 31 mm diameter accessory attachment - Accessory housing on the machine body - Blowing function.
Power 1200W
Air flow 29 l/s
Depression 190 (+/- 5%) mbar
Drum capacity 20...
€261.00
261,00 € tax excl.
Microprocessor for progressive machine start-up, block against starting after power failure, peak current limitation for safe starting without current overload, electronic feedback. Equipped with a mechanical brake,...
€188.44
188,44 € tax excl.
Automatic reset overload protection - TOTAL STOP SYSTEM: when the gun lever is released, the pressure washer stops to avoid waste - Steel pistons - High quality metal pump - Large wheels - Detergent suction from...
€291.37
291,37 € tax excl.
-Long aluminum collar for machining in molds
Constant speed under stress
-Adjustable speed
-New Super Joint System (SJS) elastic transmission system
- Speed control
€213.03
213,03 € tax excl.
Makita VC3011L vacuum cleanerAccessories supplied: Washable "Pet" filter cartridge Suction hose 3.5 m Wet and Dry double function brush 2 rigid extensions Ø35x520 mm Internal protection PVC bag dust...
€28.65
28,65 € tax excl.
For vacuuming ashes from stoves, fireplaces and barbecues - Flexible hose with aluminum nozzle - Washable HEPA cartridge filter with metal filter - Carrying handle - With blowing function - Net weight 2.4 Kg.
Power...
€155.66
155,66 € tax excl.
Coaxial lubricated compressor with pressure regulator.
Tank 50 liter
Power 2/1.5 Hp/kW
Induction motor
Rpm 2850
Cast iron cylinder
Pressure 8 max bar
Air flow 180 l/min
Output with Quick coupling
Double...
€122.95
122,95 € tax excl.
Makita UC3041A Electric Chainsaw 1800W 30 cm
Ergonomic soft grip
New adjustment lever for easier tool-less saw chain/tension adjustment
New design harpoon
Technical data:
Chain Pitch 3/8"
Max cutting width...
€269.67
269,67 € tax excl.
Characteristics: Circular saw with dust collector Engine brake Aluminum base plate Shaft lock for easy blade replacement Easily readable graduated scales to facilitate inclined cutsTechnical data:...
€204.10
204,10 € tax excl.
Features:
Possibility of adjusting the pendulum with 4 orbits and with blade change without tools
Aluminum plate adjustable from 0° to 45° on 2 sides
Speed regulator, slow start and constant speed under load for...
€158.53
158,53 € tax excl.
Characteristics: Quick blade attachment High cutting speed Orbits adjustable in 4 different positions Base tiltable from 0 to 45° on both sides Possibility of extractor connectionTechnical data: Wood...
Out-of-StockSold out
€122.95
122,95 € tax excl.
Bosch GST 90 E alternative hacksaw professional
€78.82
78,82 € tax excl.
Characteristics: Jigsaw with cooling air directed onto the cutting area for effective cleaning Universal blade attachment Plate adjustable from 0 to 45° on 2 sides Possibility of applying the aspirator...
€76.23
76,23 € tax excl.
The GC-CS 235 E chain sharpener allows you to obtain a precise sharpening result with all common types of saw chain.
Features:
Depth limitation that guarantees sharpening that is not too invasive
Graduated scale...
€69.59
69,59 € tax excl.
Valex SC161 circular saw
Steel support plate - Safety switch against accidental ignition - Blade dimens. / teeth Ø160xø20mm / Z18.
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Italiano
Français
Deutsch
Español