Stubai Carving mallet in beechwood for woodcarver

Stubai Carving mallet in beechwood for woodcarver

Reference:
511001

Carving mallet in beechwood for woodcarvers and sculptors.

Available in 3 sizes:

  • Ø 70 mm from 400 g
  • Ø 80 mm from 620 g
  • Ø 110 mm from 920 g

€17.83
17,83 € tax excl.
Diameter (mm)
Available in 30 days
Ask a question (0)
Add to wishlist
Stubai ZMV GmbH
Product Details
511001
Made IN
Italy

Specific References

ean13
9002793505688
other products in the same category:
Quick extractor DBZ-60G for screws, bolts and rivets

€33.35
33,35 € tax excl.
DBZ-60G rapid extractor for the extraction of screws, bolts and rivets, thanks to its special tips it is particularly suitable for the extraction of slightly damaged to very damaged screws. Features: ABS and nylon...
Set rabbet with 15 bearings 935.503.11 shank 12 mm CMT

€147.46
147,46 € tax excl.
The complete kit (item code 835-935.503.11), will enable you to produce 17 different rabbet sizes including rabbets for under-sized plywood applications. For rabbet sizes over 12,7mm (1/2”), make the cuts in several...
Valex cast iron revolving bench grip

€21.64
21,64 € tax excl.
Cast iron rotating bench vice, opening 60 mm, jaw width 50 mm, depth 30 mm FEATURES Jaws shown Clamp fixing
Blow gun 1 m folding barrel PROFI 50004 ASTUROMEC-WALMEC

€27.79
27,79 € tax excl.
Professional blow gun. Progressive dispensing valve with stainless steel spring Air inlet: M 1/4 ”with FF swivel connection Body: hostaform C® Barrel: 1 m foldable in shapeable copper Working pressure: 1.0 - 6.0 bar
Frame clamp Valex

€14.75
14,75 € tax excl.
Screw tightening - Body in plastic material - Frame tensioning belt length 4 metres.
Professional brush for synthetic bristle water products

€1.70
1,70 € tax excl.
Brush for water-based paints with two-component rubberized non-slip soft-touch handle - Stainless steel ferrule - Easy to clean synthetic bristle 44x13 mm bristles with width 20 - 30 - 40 - 50 - 60 - 70 mm
Fold-Up Workbench ESSENTIAL Stanley STST83492-1

€81.97
81,97 € tax excl.
Features: The worktop provides full clamping coverage, enabling clamps to be used in all positions and for all applications Features a space saving, folding worktop for compact storage on site, or in any garage or...
Troncarami a taglio passante

€22.95
22,95 € tax excl.
Lightweight Bypass Lopper Bahco Pg-20  Characteristics: Cutting diameter: 30 mmOverall length: 440 mm Small bypass lopper of compact design to prune in difficult-to-reach places. Oval steel tube handles with...
Multipurpose Scissors

€17.13
17,13 € tax excl.
La versione più innovativa e avanzata delle forbici multiuso. Rivestimento della lama in titanio.
Bessey mod. Ideal Shears for shaping and metal sheet
Out-of-StockSold out

€19.67
19,67 € tax excl.
For continuous, straight and curved cuts, edges with micro-serrations for slip-proof working, available in right D27A or left D27AL cutting versions(cut side visible in picture). Technical data: Overall length:...
Valex combined wrench

€1.72
1,72 € tax excl.
Combination wrench, chrome vanadium steel body, fork and star inclined by 15 °, glossy finish. Key size: 6-7- 8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28-30 -32 mm Key length: from 100 to 360 mm...
Cutter richiudibile Bessey DBK PH

€11.39
11,39 € tax excl.
The narrow Klemmy Bessey, in evaporated beech wood, has the upper arm, the lower arm and the eccentric lever hard wood of high quality and the bearing surfaces of pressed cork for gentle tightening.The vertical...
Valex cross grip

€94.26
94,26 € tax excl.
Valex cross vice for column drills Measurements Jaws 100 mm - Opening 90 mm Jaws 125 mm - Opening 115 mm Jaws 150 mm - Opening 150 mm
Sharpening kit for chainsaw and electric chainsaw Valex

€16.31
16,31 € tax excl.
To sharpen the cutting edges of the chains - A flat file with graduated template to adjust the depth limiting tooth - Graduated steel file holder - Interchangeable wooden handle. File length 200 mm 4 round files...
Crab Peen Hammer Steel Handle Valex

€6.97
6,97 € tax excl.
Polished steel head - Flat round hammer and nail remover pen - Soft non-slip handle. Head weight 500 gr Head size lxhxp 125x50x30 mm Total length 310 mm
Magnetic welding corner holder Valex

€7.38
7,38 € tax excl.
45° and 90° magnetic assembly positioner-square, ideal for welding, assembling, installing pipes, marking, dragging and lifting. Thickness 15 mm Dimensions 111x111 mm Maximum weight supported 23 Kg
Narrow boning professional BBQ knife 15 cm Ambrogio Sanelli

€17.40
17,40 € tax excl.
This knife is suitable for deboning and finishing/trimming pieces of meat from fat or rind. Knives of BBQ range are expressly engineered and designed for BBQ and meat applications. All our high-quality blades are...
0143/30 Knives set
-50%

€9.02 €18.03
9,02 € tax excl.
Set coltello e cavatappi con look moderno di colore nero, 2 pezzi 0143/30
Set 5 chisels for wood lathe Valex

€14.92
14,92 € tax excl.
Resharpenable steel blade - Ergonomic wooden handle. Tip shape: Round 15 mm, Convex 10 mm, Slanted cut 14 mm and Angled 14, 15 mm. Blade width 14 mm Total length 360 mm
Questions (0)

No customer questions for the moment.


Ask a question
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Captcha

Settings

Click for more products.
No produts were found.

Menu

Please sign in first.

Sign in

Create a free account to use wishlists.

Sign in