Valex pressure pump 8 L

Planet darkening helmet mask for Valex welding

Reference:
1960931

Complete with fixed auto-darkening glass (Automatic LCD Technology) 90x110mm - Optical class 1/3/1/3 - light / dark 0.4 ms. mma, mig-mag.

€34.34
34,34 € tax excl.
Available in stock 1 Item
Ask a question (0)
Add to wishlist
Valex
Product Details
1960931
Made IN
Italy
other products in the same category:
Valex double fork keys 8 piece

€6.15
6,15 € tax excl.
Valex double fork keys 8 piece Measurements: 6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22 mm Forks inclined at 15 ° Steel body Satin finish Supplied with plastic support.
Bessey mod. Ideal Shears for shaping and metal sheet
Out-of-StockSold out

€19.67
19,67 € tax excl.
For continuous, straight and curved cuts, edges with micro-serrations for slip-proof working, available in right D27A or left D27AL cutting versions(cut side visible in picture). Technical data: Overall length:...
Irwin TCT cylindrical drill bits metal drilling

€12.07
12,07 € tax excl.
TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure.Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched to...
M12 FUEL 76mm sub compact multi-material cut-off tool M12FCOT-0

€2.20
2,20 € tax excl.
Blue 6.2mm wide tip permanent marker. Dries in seconds. Up to 72 hours without cap - does not dry out. Can be used on wet, oily, rusty and debris surfaces. For use on concrete, wood, metal, plywood, OSB and plastic.
Tape measure 3 mt ABS case SUNFLEX Stanley 0-32-189

€7.11
7,11 € tax excl.
Features: Case in synthetic material with tangential exit of the belt Lacquered steel band with protective paint. Shockproof ABS case Automatic return of the meter without clogging Rounded shape for a good grip...
Makita original replacement parts
Out-of-StockSold out

€0.00
0,00 € tax excl.
Original Makita spare partsLIST OF AVAILABLE SPARE PARTS:    Speed ​​change levers    Engine casings    Light Circuits    Plate springs    Reversibility levers    Switches    Battery terminals    Chucks    Gear groups...
Pruning shears Pro Valex

€9.75
9,75 € tax excl.
Forged and tempered steel structure - Upper blade in special SK5 steel - Forged steel handle covered in non-slip rubber - Safety catch - Cutting capacity on green wood: 25 mm. Total length 220mm.
CRV 9 Piece Hex Wrench Series

€5.33
5,33 € tax excl.
Contains one piece per size: 1,5-2-2,5-3-4-5-6-8-10mm - Length 48-122mm - Chrome vanadium steel body - Burnished finish - Plastic support.
Set Pinze Snap On

€115.57
115,57 € tax excl.
Set of pliers including PRH56A and PRH57A with safety rings and replaceable tips For PRH56A bits: 6 mm (copper) 9 mm (black) 1.2 mm (silver) For PRH57A bits: 9 mm (black) 1.2 mm (silver) 1.8 mm (copper)
Butcher professional BBQ knife 26 cm Ambrogio Sanelli

€37.00
37,00 € tax excl.
This knife is suitable for cutting large slices of meat. Knives of BBQ range are expressly engineered and designed for BBQ and meat applications. All our high-quality blades are made of Nitro-B, a special nitrogen...
Cervus S/10 Professional angle brush in fair bristles
Out-of-StockSold out

€3.61
3,61 € tax excl.
Angle brush, pure fair  bristles top quality, raw wooden handle, epoxy resin, solvent resistant. Solvent enamel, water-based wall paint, difficult –to – reach areas.Available Angle brush width: 20-30-40-50-60-70 mm...
Cutter 18 mm FATMAX Stanley FMHT10338-0

€9.84
9,84 € tax excl.
Features: Faster and safer Premium blade change system. Push the blade all the way in, push the red button back and the blade is released Large front finger rest cavity - gives greater comfort and control during...
Pipe cleaner, drain and sink Bang

€16.39
16,39 € tax excl.
Compressed air gun for pipe cleaners, sink cleaners, drain cleaners, etcWith 4 rubber adapters for shower-bidet-Wc-sink- diameter 20cm- diameter 11.3cm- diameter 6.3cm- diameter 5.2cm
OM ASTUROMEC-WALMEC series airbrush tank above 680 cc

€98.36
98,36 € tax excl.
Tank - Nylon 680 cc Body - Nickel-plated sandblasted brass Cap - Nickel-plated brass Needle / Springs / Nozzle - Stainless Steel Adjustments - Product / range Weight 780 g Operating pressure 3.0 - 3.5 bar Air...
Step tip from 4 to 32 mm

€9.83
9,83 € tax excl.
Measure from 4-32mm. 3-surface shank diameter 10mm Suitable for expanding holes in sheet steel, aluminum, copper, plastic and composite materials
Bessey PS 55 Seaming tool for smooth surface
Out-of-StockSold out

€273.00
273,00 € tax excl.
For clamping and positioning components with a smooth surface, such as ceramic, granite, Corian, plastic, sheet metal and glass, which require low clamping forces (up to 260 N). Q Cam lever to compensate for differing...
Valex steel revolving bench grip

€39.34
39,34 € tax excl.
Stahldrehbankschraubstock Öffnung 115 mm - Backen 100 mm Öffnung 125 mm - Backen 125 mm
Self-locking cutter 18 mm Stanley STHT10266-1

€4.92
4,92 € tax excl.
Features: Body in rigid synthetic material and soft rubber Steel blade holder bar The blade holder bar can house up to 2 spare blades Soft scroll cursor with audible "click" Rear blade breaker element...
Stanley 0-42-188 Post level

€14.75
14,75 € tax excl.
Features: Perfect for leveling vertical surfaces Equipped with 4 magnets, for use on metal surfaces 3 bubbles Elastic for stable positioning
Makita MAKPAC connector case

€27.54
27,54 € tax excl.
MAKPAC connector case, stackable with connecting and closure clips (to connect multiple MAKPAC together), in 4 sizes: Type 1: h 105 mm - Base 295x395 mm Type 2: h 157 mm - Base 295x395 mm Type 3: h 210 mm - Base...
Questions (0)

No customer questions for the moment.


Ask a question
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Captcha

Settings

Click for more products.
No produts were found.

Menu

Please sign in first.

Sign in

Create a free account to use wishlists.

Sign in