€16.31
16,31 € tax excl.
Makita centering tip for diamond core bit suitable for DBM130 - DBM080 - 8406 to be used with adapter 053161
Centering tip for Makita crown for DBM130-8406 A-80503
Reference:
A-80503
Makita centering tip for diamond core bit suitable for DBM130 - DBM080 - 8406 to be used with adapter 053161
€16.31
16,31 € tax excl.
Add to wishlist
You may also like
€39.83
39,83 € tax excl.
Makita diamond core extension M18 x 2.5 suitable for DBM130 - DBM080
to be used with adapter 053161
€23.77
23,77 € tax excl.
Makita diamond ring adapter M18 x 1.5 to M18 x 2.5 suitable for DBM130
€155.52
155,52 € tax excl.
Ideal for drilling holes with a maximum depth of 420 mm on concrete and other building materials. Used with Makita diamond core drill DBM230 model. Thread 1+1/4 ". Material Bi metal.
Diameter: from Ø 32 mm to Ø 225 mm
€265.95
265,95 € tax excl.
Diamond rim M18 x 1.5 dry use for Mod. 8406, DBM130.
For use with single rotation.
Applications: concrete, granite, stone
€2,450.82
2.450,82 € tax excl.
Core drill with slow starting, for execution of wet holes with a large diameter and depth of masonry, cement and stone
Features:
Use the core drill only with the proper support code. P-54190Mechanical clutchThermal...
€459.59
459,59 € tax excl.
Dry core drill ideal for holes Ø 132 mm
Features:
Electronic switchConstant speed under loadSoft starter and electronic protection against overload2 mechanical speedsSafety clutch
Technical data:
Power consumption...
other products in the same category:
€147.46
147,46 € tax excl.
The complete kit (item code 835-935.503.11), will enable you to produce 17 different rabbet sizes including rabbets for under-sized plywood applications.
For rabbet sizes over 12,7mm (1/2”), make the cuts in several...
€3.28
3,28 € tax excl.
Medium steel wool N ° 0 in ball of yarn
Steel wool with high technical characteristics of fineness and effectiveness
Ideal for multiple uses such as shelling, wax application, metal polishing, etc.
Ball of yarn...
€1.56
1,56 € tax excl.
Black 1 mm fine tip permanent marker.
Dries in seconds.
Up to 72 hours without cap - does not dry out.
Clip to hang it on the protective helmet.
€30.33
30,33 € tax excl.
Chip carving and relief work, statues, mouldings and profiles
Strictly forged by hand, thus achieving the highest quality
Manual water sharpening
Heat treatment: TSV tempering to obtain a hardness of 58:60 HRC
Fine...
€8.11
8,11 € tax excl.
Protective screen (25 x 21 cm) for face, protects the whole face up to beyond the chin.
The polycarbonate screen is equipped with:
Adjustable lateral fixing mechanisms with jerky movement for a maximum angle of 180°...
€88.60
88,60 € tax excl.
Bench screw Ø 30 mm, screw length 400 mm, weight 3.6 Kg.
€9.88
9,88 € tax excl.
Non-slip anatomical handle. Double-edged steel blade. Possibility to store an extra blade in the body.
Available:
0-28-616: Width 25 mm, Length 155 mm
0-28-617: Width 38 mm, Length 180 mm
0-28-619: Width 64 mm,...
€10.25
10,25 € tax excl.
Carpenter's hammer with three-component fiber handle.
Head weight 300 gr
Length 495 mm
Dim.head lxhxp 120x34x38 mm
€16.39
16,39 € tax excl.
Compressed air gun for pipe cleaners, sink cleaners, drain cleaners, etcWith 4 rubber adapters for shower-bidet-Wc-sink- diameter 20cm- diameter 11.3cm- diameter 6.3cm- diameter 5.2cm
€80.74
80,74 € tax excl.
Flame retardant cable reel, 2 shuko sockets and 2 10 / 16A bypass sockets
cable section mm² 3X1.5
€17.64
17,64 € tax excl.
The versatile tool that is a MUST for every tool box. The WINBAG packs a powerful 135 kilograms of lifting pressure and is great for leveling windows, installing cabinets, positioning heavy doors and so much more.
€4.02
4,02 € tax excl.
Soft and ergonomic handle. Rigid and sharp blade for mastic removal, roller cleaning, to open can of paint. Metal knocker.
Dimensions:
Width 76 mm
Length 224 mm
Weight 250 g
€4.59
4,59 € tax excl.
The Makita B-57548 bit holder converts the SDS-Plus chuck into 1/4 hex screwdriver bits.
This item is to be used in rotation mode only
€23.77
23,77 € tax excl.
Ultra-light professional shovel in harmonic steel, willow handle.
Dimensions: 365x275 mm - Handle length 140 cm.
€103.28
103,28 € tax excl.
Features:
Load capacity 250kg
Long lasting steel structure
Double working height: 620 - 800 mm. Allows you to use the bench comfortably
Bamboo worktop: durable and resistant, Worktop width: 541mm
Additional...
€170.49
170,49 € tax excl.
Stanley Bostitch stapler A/35 19&22MM manual mechanical MS-3522-E
Diameter 0.8 (Min.) 2.25 (Max.) mm
Length 19 (Min.) 22 (Max.) mm
€2.79
2,79 € tax excl.
Mini hand cramp pattern carbon steel - galvanised, Measure C= 18X6 mm
Available in these models:
06302 tightening working length 60 mm
06303 tightening working length 80 mm
06304 tightening working length 100 mm
€4.34
4,34 € tax excl.
PCL-3B GRAPHITE MINE
IDEAL FOR: Paper, Wood, Laminates, Building Material, Artificial Stones and Stones, Metals and Non-Ferrous Metals.
€37.00
37,00 € tax excl.
This knife is suitable for cutting large slices of meat.
Knives of BBQ range are expressly engineered and designed for BBQ and meat applications. All our high-quality blades are made of Nitro-B, a special nitrogen...
€45.08
45,08 € tax excl.
Professional lopper with Bypass cutting Stocker
Able to cut branches up to 40 mm in diameter.
Length: 75-100 cm
Weight: 1,5 kg
€19.59
19,59 € tax excl.
5 drills for wood cylindrical shank 4, 5, 6, 7, 8 mm 5 drill bits for masonry cylindrical shank 4, 5, 6, 7, 8 mm 7 HSS drills for metal cylindrical shank 2, 2.5, 3, 3.5, 4, 4.5, 5 mm 3 Torx screwdriving bits T20, T25,...
€13.85
13,85 € tax excl.
Chrome vanadium steel body - Satin finish - Inversion by lever - Quick release mechanism of the compass - Soft bi-material handle.
- 3/8" MALE square connection
- total length 210mm
- number of teeth 45
- Ø head...
€4.84
4,84 € tax excl.
OLFA 180 BLACK multipurpose cutter knife
- Multi-purpose Cutter knife suitable for paper, cardboard, plastic, leather, etc...
- Metal handle, cursor blade stop
- Equipped with AB blade
- Blade width: 9mm
€17.62
17,62 € tax excl.
- Chrome-vanadium steel blades- Parallel adjustment with eccentric bolts- Tubular steel handles with non-slip rubber grip.Length 470mmCutting capacity 8 mm
€11.89
11,89 € tax excl.
Features:
Extra-flat case in synthetic material with chromed metal finish
Compact pocket size: ultra-flat case
Lacquered steel band with protective paint
Automatic return of the ribbon, without jams
Dimensions:...
€99.18
99,18 € tax excl.
Ideal for windows, drywall panels, armored and fire doors, furniture, and appliances.
Features:
Lifting mechanism protected by a metal housing that prevents contact with dust or debris
Beveled base to facilitate...
€21.23
21,23 € tax excl.
Valex hand auger
Available sizes:Height 95 cm - tip Ø 10 cmHeight 95 cm - tip Ø 15 cm
€7.30
7,30 € tax excl.
Set of 2 scissors - different lengths 240 mm and 210 mm in hardened steel - Anatomical handle in two-component plastic material.
€5.33
5,33 € tax excl.
PCL-3C GRAPHITE AND PASTEL MINE
2 pcs Graphite - 2 pcs Yellow - 2 pcs Red
IDEAL FOR: Plastic Materials, Ceramic Materials, Glass, Paper, Wood, Laminates, Building Materials, Artificial Stones and Stones, Metals...
€8.20
8,20 € tax excl.
Practical to use, ergonomic and easy to handle, allowing a controlled and precise dosing.
Can not be used with spray with multi-nozzle dispensing.
€14.75
14,75 € tax excl.
Screw tightening - Body in plastic material - Frame tensioning belt length 4 metres.
€21.31
21,31 € tax excl.
Carving mallet in beechwood for woodcarvers and sculptors.
Available in 3 sizes:
Ø 70 mm from 400 g
Ø 80 mm from 620 g
Ø 110 mm from 920 g
Customers who bought this product also bought:
€23.77
23,77 € tax excl.
Makita diamond ring adapter M18 x 1.5 to M18 x 2.5 suitable for DBM130
€39.83
39,83 € tax excl.
Makita diamond core extension M18 x 2.5 suitable for DBM130 - DBM080
to be used with adapter 053161
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Italiano
Français
Deutsch
Español