€39.26
39,26 € tax excl.
Valex 8016 pneumatic stapler with 100 point tank
Bent radiator brush with long wooden handle
Reference:
1961196
Anti-perspiration wooden handle - Stainless steel ferrule - MIXED bristle - Ideal for radiators, corners and profiles with dimensions 30x12x44 - 40x12x51 - 50x12x51 - 60x12x57 mm
€2.05
2,05 € tax excl.
Add to wishlist
other products in the same category:
€2.79
2,79 € tax excl.
Mini hand cramp pattern carbon steel - galvanised, Measure C= 18X6 mm
Available in these models:
06302 tightening working length 60 mm
06303 tightening working length 80 mm
06304 tightening working length 100 mm
€5.74
5,74 € tax excl.
Chrome vanadium steel body - Head finish: pearl-nickel plated - Soft bi-material handle.
length 110mm
useful beaks mm 13.0
net weight 70 g
€21.23
21,23 € tax excl.
Replacement Blade in blister 3001 / B for 3101 and 3104 Lowe shears.
€16.39
16,39 € tax excl.
Gun with a powerful double push delivery system for cartridges 300 and 400 ml
Features:
Long body 26 cm and 360 degrees of mobility for the handle rotation maneuver in confined spaces.Tree in hardened steel and...
€33.08
33,08 € tax excl.
Extension with hexagonal shank from 19 mm to 600 mm for conical coupling crown Makita P-08713 for HR5000K HR3850K HM1200K
€27.87
27,87 € tax excl.
Definition work
Strictly forged by hand, thus achieving the highest quality
Manual water sharpening
Heat treatment: TSV tempering to obtain a hardness of 58:60 HRC
Fine wood handle and very high quality steels
Length:...
€3.69
3,69 € tax excl.
Double-edged steel blade.
Available:
0-28-631: Width 25 mm, replacement blade for scraper cod. 28-616
0-28-290: Width 38 mm, replacement blade for scraper cod. 28-617
0-28-292: Width 64 mm, replacement blade for...
€9.75
9,75 € tax excl.
Features:
Polypropylene organizer with special structure of the internal dividers that allows to obtain spaces at 90 °
Side hinges that allow you to stack up to three units
Special configuration of the lid that...
€6.48
6,48 € tax excl.
- 1/4 "bit holder
- Contains 12 chrome vanadium steel inserts
3 slotted screws
nr. 3 phillips
nr. 3 torx
3 hexagonal
€48.28
48,28 € tax excl.
Scissor shears for cutting frames and profiles in wood, plastic, rubber-Lowe 3104. With safety stop at 45 ° and reference notches at 15 °, 30 ° and 90 °.
Suitable for cutting frames, finishing strips for tiles,...
€3.10
3,10 € tax excl.
Indelible marker extra wide tip 14.5 mm blue.
Dries in seconds.
Up to 72 hours without cap - does not dry out.
Can be used on wet, oily, rusty and debris surfaces.
For use on concrete, wood, metal, plywood, OSB...
€6.97
6,97 € tax excl.
Polished steel head - Flat round hammer and nail remover pen - Soft non-slip handle.
Head weight 500 gr
Head size lxhxp 125x50x30 mm
Total length 310 mm
€36.10
36,10 € tax excl.
This knife is suitable for cutting large slices of meat.
Knives of BBQ range are expressly engineered and designed for BBQ and meat applications. All our high-quality blades are made of Nitro-B, a special nitrogen...
€168.03
168,03 € tax excl.
Set consisting of:
Trimming knife 15 cm suitable for deboning and finishing/trimming
Boning knife, stiff curved blade 15 cm for deboning and finishing/trimming
Santoku knife granton blade 18 cm suitable for...
€25.33
25,33 € tax excl.
Contains:
9 taps and dies ISO metric coarse thread sizes:
- M3x0.50-M4x0.70-M5x0.80-M6x1.00-M7x1.00-M8x1.25-M9x1.25-M10x1.50- M12x1.75
- 1 tap wrench
- 1 die holder
In chromium steel, for work on hard metal...
€2.70
2,70 € tax excl.
Black 6.2mm wide tip permanent marker.
Dries in seconds.
Up to 72 hours without cap - does not dry out.
Can be used on wet, oily, rusty and debris surfaces.
For use on concrete, wood, metal, plywood, OSB and plastic.
€3.89
3,89 € tax excl.
Heavy double pipe wrench, straight hexagonal mouth, polygonal bent mouth with through hole, body in chrome vanadium steel, polished finish.
Key size: 6-7- 8-9-10-11-12-13-14-15-16-17-18-19 mm
Key length: from 110 to...
€13.52
13,52 € tax excl.
Flexible spiral cable in galvanized steel - Crank for manual use and hexagonal attachment for use with drills and screwdrivers - Ergonomic handle - Ideal for unclogging bathroom and kitchen drains.
Cable length 7.5...
€27.54
27,54 € tax excl.
MAKPAC connector case, stackable with connecting and closure clips (to connect multiple MAKPAC together), in 4 sizes:
Type 1: h 105 mm - Base 295x395 mm
Type 2: h 157 mm - Base 295x395 mm
Type 3: h 210 mm - Base...
€29.84
29,84 € tax excl.
Ergonomic soft grip
Lockable handle for minimum bulk Specifications:
Code 23467900
Material ABS plastic with glass fibers
Dimensions 60 x 180 x 160
VR16 ring stitches
Ring stitch diameter 2-8 mm
Usage for...
€7.38
7,38 € tax excl.
Two-component, non-slip soft-touch rubberized handle - Fabric height: 12 mm - Solvent-resistant nylon fabric to guarantee excellent paint collection and uniform coverage - Specific for plasters and smooth walls. Ideal...
€2.54
2,54 € tax excl.
Polyester flat brush, for acrylic, epoxy resin, raw wooden handle, stainless steel ferrule.
Acrylic varnish and enamel.Available Flat brush width: 30-40-50-60 mm
€25.00
25,00 € tax excl.
Thanks to its very flexible blade, this knife is suitable for filleting fish.
Knives of BBQ range are expressly engineered and designed for BBQ and meat applications. All our high-quality blades are made of Nitro-B,...
€5.10
5,10 € tax excl.
NEMESIS with a single cutting edge with four 90° asymmetric faces guarantees excellent performance on both concrete and reinforced concrete, this is due to the construction characteristics that allow better drilling...
€0.94
0,94 € tax excl.
Double fork wrench, chrome vanadium steel body, 15 ° inclined forks, polished finish.
Key size: 6x7 - 8x9 - 10x11 - 12x13 - 14x15 - 16x17 - 18x19 - 20x22 - 21x23 24x26 - 25x28 - 30x32 mm
Key length: from 120 to 300...
€9.84
9,84 € tax excl.
Features:
Faster and safer Premium blade change system. Push the blade all the way in, push the red button back and the blade is released
Large front finger rest cavity - gives greater comfort and control during...
€9.88
9,88 € tax excl.
Non-slip anatomical handle. Double-edged steel blade. Possibility to store an extra blade in the body.
Available:
0-28-616: Width 25 mm, Length 155 mm
0-28-617: Width 38 mm, Length 180 mm
0-28-619: Width 64 mm,...
€8.61
8,61 € tax excl.
Mace handle with three-component fiber handle, length 260 m
FEATURES
Forged steel head
Soft non-slip handle
€4.84
4,84 € tax excl.
Soft-touch non-slip rubberized two-component handle - Fabric height: 12 mm - Continuous fiber fabric for quick and uniform coverage - Heat sealed to prevent fiber loss - Specific for slightly rough surfaces. Ideal for...
€97.95
97,95 € tax excl.
Features:
LCD screen. Measurement angle: from 0 ° to 225 °
Antichoc bubbles: 1 horizontal and 1 vertical
Anodised aluminum profile
Angle measurement accuracy: +/- 0.1 °
Arm length: 43 cm
Functions:...
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Italiano
Français
Deutsch
Español