IFR V09 is a PIR sensor with switch function. IFR V09 can be used with all lighting devices. Switching on and switching off of the IFR V09 connected devices takes place through detection of the changes in tempe erature combined with the movement within its range of action.
The system remains in operation for all the time set after which, if it does not detect other movements, it switches off automatically
SET UP
For correct operation, the photocell of the sensor must be installed in a position that does not affect the sensitivity. The vertical sensitivity (from a minimum of 50 cm to a maximum of around 220 cm) and horizontal sensitivity (maximum of 100 cm) may be reduced if the sensor’s photocell is installed in a position or at a height that reduces the detection cone, such as next to shelves or sides of a wardrobe. It is also not recommended to install the photocell in line with the central closing of the wardrobe door in order to avoid undesired turning-on, which are also caused by minimum movement detections.
Temperature variations caused by air conditioners, steam or any movements within the detection area can also activate the sensor’s photocell. However, the sensor is protected against cell phone interference, radiofrequency transmissions etc., in accordance with current EU directives.
No customer questions for the moment.
Please sign in first.
Sign inCreate a free account to use wishlists.
Sign in
Italiano
Français
Deutsch
Español