- Key hole closure
- Axis 90 mm
- Forend 22 mm
- Backset 25-30-35-40-45-50-60 mm
- Hub 8 mm
- Material steel
Built-in lock with latch and bolt. Center distance 90 mm. 22x238 mm front with round or square edge. Seven entrances, from 25 to 60 mm. 4 mixed ciphers. Made entirely of steel or in the versions with front, latch and bolt in brass or stainless steel. Reversible latch. Case with holes for fixing the handles with through screws for entrances 40-45-50.
For interior wooden doors.
To turn the latch, take it out from the front of the lock, pushing on the rear screw, and rotate. For entry 25 unscrew the screw, turn the latch and tighten. Prepare a groove and a groove on the panel having the dimensions shown in the drawing. Secure the lock with two 4.5x25 mm screws.