Click for more products.
No produts were found.

Lock Euro72 forend 18 mm round ends with cylinder lock for internal door AGB

Reference:
B10083.55.22

Lock for internal doors. The distance between the forend and the hub and the closing hole is 72 mm: a standard adopted for internal doors constructed in Central Europe. The round faced latch on both sides, included to prevent dynamic stress of the door, is reversible for right and left doors.

Finish: Brass varnish-Nickel plated-Bronzed varnish-Tropical zinc

Measures looks image.

€9.22
Color or Finishing
Available in 30 days
Add to wishlist
Description

Technical data:

  • Cylinder lock
  • Axis 72 mm
  • Forend 18 mm
  • Backset 55 mm
  • Hub 8 mm
  • Material steel

Features:

Embedded lock with latch and bolt, to be used in combination with a DIN V 18254 profile cylinder. 72 mm centre. 18 mm forend with round ends. Single 55 mm backset. Made entirely of steel with patented co-moulded self-lubricating latch and steel bolt. Reversible latch. Case with holes for handle installation using through screws.

Usage:

For interior and main timber doors. Specially suitable for doors with narrow stiles.

Fixing:

Prepare cutout and mill the panel according to the dimensions shown in the diagram. Secure the lock with two 4,5x25 mm screws. To reverse the spring latch, push it out of the forend by pushing with a screwdriver against the screw on the back, then rotate it.

Product Details
B10083.55.22
Reviews
No comments
Related products
other products in the same category:
€106.63
Cylinder lock for armoured doors, 2 throw, reversible, backset 64 mm, Centre Distance 85 mm. Latch-bolt and dead-bolt, pre-setting for additional locking points. Distance Latch-bolts: 25 (4 bolts) - 27 (4 bolts) - 28...
€78.37
Application: on up-and-over doors, with transit doors Operation: from inside and outside opening with handle, unlocking from outside with key, from inside with lever Finish: normal brass cylinder, galvanised lock...
€34.08
FEATURES: Lock (ambivalent) mortise cylinder and roller Painted brass front 21 mm wide and 157 mm long panel board Inlet sizes available: 50-60 mm Lock box Base (changes with the variation of the Inlet) mm x...
€111.00
Mortise lock with double triple bit with half turnTECHNICAL FEATURES:2 throwskey entry mm 60box dimensions 170x83x17 mmhead dimensions mm 265x25x3distance between handle and key center mm 78standard finish: nickel-plated
€37.65
Application: for metal transit doors. Operation: handle -operated spring latch, locks from inside and outside with key. Finish: brass cylinder, galvanized case. Square spring latch (2 keys supplied), B= 7 mm Closing...
€107.00
FEATURES: Lock zinc-plated 3 locking points(ambivalent to the right and left) with cylinder Chrome steel front 25 mm wide and 350 mm long panel board Inlet size: 60 mm Lock box Base 123 mm x high 208 mm Wheelbase...
€139.90
Double bit DOUBLE lock for application with keyhole lock, double bit keys and additional deadbolt. Key entry and handle 70 mm. Available lock:  Right SER 7161 1DE  Left SER 7162 1SE  Measurements as per...
Lock to insert 2032.E50
Out-of-Stock
€94.40
TECHNICAL FEATURES:2 throwskey entry mm 50box dimensions 170x73x17 mmhead dimensions mm 265x25x3distance between handle and key center mm 78standard finish: nickel-plated
€111.00
Triple double-bit lock with half turnTECHNICAL FEATURES:4 throwsKey entry mm 70Box dimensions 170x107x17 mmHead dimensions 320x25x3 mmDistance between handle and key center mm 85Standard finish: nickel-plated
Questions (0)

No customer questions for the moment.


Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Captcha

Settings

Menu

Create a free account to use wishlists.

Sign in