Colorificio Sammarinese Biosistem Matt white water-based paint superwashable for indoor use
Biosistem Matt white water-based paint superwashable for indoor use.
- 15 - 20 % with roller.
- 20 - 25 % with brush.
- 30 - 35 % with airless.
Any hardened droplets can be easily removed with Nitro thinner.
The open product will keep for five months if tightly closed, stored in the dark and not diluted.
It plays an effective preventive action against the formation of mold. For indoor use. Certified according to UNI 11021: 2002 and UNI 10792: 1999. It has the essential requirements of special paint and varnish for painting cycles for rooms in which food are prepared or processed in accordance with HACCP.
Uses In building as a washable mural paint for indoor. The product is certified by the “ISTITUTO GIORDANO” with test report n. 191168 dated 21.12.2004 in according to the UNI norms 11021:2002 and UNI 10792:1999 for the determination of the particular and essential requirements of varnishes and paints, for the painting of rooms where alimentary items are produced and worked out, in according to the normative HACCP.
General data White mural latex paint for indoor. Particularly suitable for places which are subject to persistent humidity like cheese and beer factories, wine cellars, slaughterhouses, big kitchens or, more simply domestic kitchens and bathrooms. Furthermore its main characteristics are:
- Smell cession: grade 0 (UNI norm 11021/2002)
- Resistance to the disinfection agents: no alteration (UNI norm 11021/2002)
- Taken of dirt: very low ((∆L<3,00) (UNI norm 10792/1999)
- Transpiring power
- Good covering
- Good washability
Technical features (data gathered at the temperatur Technical features e at 20°C)
- Brookfield viscosity cps. 2800 ± 200
- Specific gravity kg/l 1,700 ± 0,030
- Solids % 70 ± 2
- Theoretical spreading rate mq/l 10 - 12
- Appearance of the film gloss Matt
- Thinner code water Dust free Minutes 20
- Touch free Minutes 1
- Dry in depth Hours 4 - 6
- Over painting Hours 6 - 8
Application modalities
- By brush To dilute with water al 20-25%
- By roll To dilute with water al 15-20%
- By spray gun To dilute with water al 30-35%
- Accurately mix the product, slowly adding water until getting the anted application viscosity. Do not apply the product with a temperature lower than 5° C. Wash brushes and tools right after using them. Keep the product freeze-safe.
- Made IN
- Italy
Specific References
- ts_reference
- SAM0098
- ean13
- 8024914877536
No customer questions for the moment.