€25.41
25,41 € tax excl.
Track drilled and anodized aluminum for sliding door system Koblenz, length 2 Mt capacity 40 Kg
Koblenz Sliding system Kit for door, load capacity 40 Kg with rail 190 cm
Reference:
040040/190
Kit includes:
- Perforated and anodized aluminum rail reach 40 kg length 190 cm
- Sliding carriage (2 pieces)
- Door anchor bracket (2 pieces)
- Carriage support Screw (2 pieces)
- Lower guide (1 pieces)
- Holding brake (2 pieces)
€30.33
30,33 € tax excl.
Add to wishlist
FEATURES:
- Purpose: To slide a rigid door
- For doors up to 100 cm lenght
- Capacity: 40 Kg for shutter
- Fluency: Use nylon carriage with tires made of Delrin and bearing
- Adjustment: The holding brake is adjustable according to the weight of the shutter
You may also like
€1.53
1,53 € tax excl.
Koblenz side attachment bracket for track 0400, capacity 40kg
other products in the same category:
€5.00
5,00 € tax excl.
Wheel diameter 22 mm
Pad thickness 4.2 mm
Total thickness 26mm
Thickness without screw 19.6 mm
Screw thickness 6 mm
Screw pitch 6MA
Bearings particularly suitable for use in shower enclosures...
€5.74
5,74 € tax excl.
Plastic support for lower U guide for sliding glass door with two holes, up to 12 mm thick
Product Detail:
Length: 8.7cm
Width: 2.2cm
Height: 2cm
Out-of-StockSold out
€63.20
63,20 € tax excl.
Sliding system Kit for wooden doors 18 mm distance with 2 patented soft air closing for doors up to 80kg. Aesthetically innovative, this system give a new concept of the external wall slidings, Thanks to the absence...
€55.13
55,13 € tax excl.
Rail + beam in aluminum 2 mt. with ovals cut for distance from the wall mm.12 for sliding wooden doors.
Material: Anodised aluminum
Finishing: Brushed silver anodized
€21.80
21,80 € tax excl.
Upper aluminum track for Koblenz sliding system for folding doors for wardrobes, length 1.5 m, capacity 40 kg
€6.97
6,97 € tax excl.
Adjustable built-in sliding trolley with Ø 20 mm nylon wheel, round groove and safety device to prevent the trolley from coming out of the track for cabinet door, plastic half-moon 75x35 mm support.
Specifications:...
€107.38
107,38 € tax excl.
Complete kit for sliding glass-front cabinets with 5/6 mm glass thickness.
€10.21
10,21 € tax excl.
Black drilled and anodized track Mt 1, capacity 50 kg for KIT 0200/4 KIT 0200/50 and KIT 0200-5/50.
€27.46
27,46 € tax excl.
Nylon wheel 1 bearing with round groove, Ø 64x80 mm complete with bolt article 400NY.80 / 16 Combi
Measurements as shown in the images.
€12.70
12,70 € tax excl.
360 ° swivel plate with hole Ø30 mm, maximum capacity 150 Kg
€6.43
6,43 € tax excl.
Ideal for making sliding doors, without drilling and without recessing the track
The Kit includes :
- Upper shoe (2 pieces)
- Lower trolley with delrin pulley (2 pieces)
- Holding brake (1 pieces)
- Slide and...
€6.97
6,97 € tax excl.
Adjustable built-in sliding trolley with Ø 25 mm nylon wheel, for cabinet door with half moon support in nickel-plated iron 60 x 37 mm
Nylon wheel Ø 25 mm Round groove
Specifications:
Diameter 25 mm
Thickness...
€13.93
13,93 € tax excl.
Specifications:
For wooden doors maximum capacity 40 kg
Drilling: Ø 35 mm
Finish: Bronze - Galvanized
Complete kit with:
2 pieces bottom slide
2 pieces top spring guide
2 pieces upper retainers
€14.75
14,75 € tax excl.
Koblenz adjustable sliding system kit for single hanging door article 1011/8
Track to be purchased separately
The Kit includes :
- Adjustable carriage with 2 bearings (2 pieces)
- Adjustable lower eccentric...
€80.05
80,05 € tax excl.
System Caimi Export 9400 6
Kit 2 cart for wardrobe with external sliding door cushioned.
FEATURES:
The 9400 system is a new cushioned wardrobe mechanism, allowing to create 2 or 3 shutters with overlapping doors....
€17.95
17,95 € tax excl.
Lower slider for external door.
L (Left) R (Right)
€2.21
2,21 € tax excl.
Steel roller with delrin wheel for sliding doors
Available wheel sizes
Ø 18 mm - centre to centre distance 4 cm (1333.000.00)
Ø 24 mm - centre to centre distance 6 cm (1332.000.00)
€242.21
242,21 € tax excl.
Sliding system for door, wheels with phenolic support and lower U-shaped guide, wall stops and supportsArticle IN.15.258
€6.15
6,15 € tax excl.
Bearing wheel for sliding shower enclosure door.
- Wheel Outer Diameter: 28 mm
- Wheel Inner Diameter: 6 mm
- Wheel thickness: 7 mm
FEATURES:
High load capacity, very resistant product
For glass doors of...
€15.03
15,03 € tax excl.
Wheel for underbed furniture also suitable for the linear movement of furnishing modules.
Features:
With locking brake
Wheel diameter 75 mm
Load capacity 80 kg
Gray Color/Finish
Apply on the internal side of...
€4.10
4,10 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.006.00
Specifications:
D - 16mm diameter
P - Thickness 5 mm
B - Hole Ø 5 mm
€7.38
7,38 € tax excl.
Nylon wheel Ø 12 mm flat type
Specifications:
Diameter 12mm
Thickness 3mm
bolt 3 but length 4 mm
€51.92
51,92 € tax excl.
Long olive for nylon guide for 452 Combi sliding gates
Diameter Ø 44x220 fixing by M16 bolt
€2.05
2,05 € tax excl.
Steel roller steel wheel with groove for sliding doors Ø 18 mm ball bearing wheel
Available wheel sizes
Ø 18 mm - centre to centre distance 4 cm
€4.84
4,84 € tax excl.
Upper and lower 2-metre aluminum channel for sliding system 0310/7 and 0310/9.
€13.85
13,85 € tax excl.
Wheel for underbed furniture also suitable for the linear movement of furnishing modules.
Features:
With locking knob
Wheel diameter 60 mm
Load capacity 60 kg
Silver Painted Color/Finish
Apply on the internal...
€8.11
8,11 € tax excl.
Sliding trolley with Ø 30 mm wheel and 70x30 mm fixed support for sliding system of furniture doors
Material: Aluminum, Nylon
Measurements as per images.
€5.25
5,25 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.003.00
Specifications:
D - 12,7 mm diameter
P - Thickness 5 mm
B - Hole Ø 4,76 mm
€14.75
14,75 € tax excl.
Pair of sliding guide for drawer (DX/SX) Blum Tandembox Antaro/Intivo - Total extraction - Soft closing
Characteristics:
Capacity 30kg (578) or 50Kg (579)
Length: 270/350/400/450/550/600/650 mm
€7.30
7,30 € tax excl.
U-shaped support in tropicalized iron 50 x 26 x 15 mm
Nylon wheel Ø 30 mm Round groove
Specifications:
Diameter 30 mm
Thickness 10 mm (Thickness with bushing 11 mm)
Round throat diameter 6 mm - radius 3 mm...
€3.75
3,75 € tax excl.
Sliding hook for sliding picture holder "museo", white finish.
Measures looks image.
Customers who bought this product also bought:
€1.56
1,56 € tax excl.
90 ° angle in aluminum 21 / 19.F2 for Volpato plinth 20 / 10.400AL
Available height 100mm / 120mm / 150mm
€28.69
28,69 € tax excl.
Kit includes:
Perforated and anodized aluminum rail reach 40 kg length 150 cm
Sliding carriage (2 pieces)
Door anchor bracket (2 pieces)
Carriage support Screw (2 pieces)
Lower guide (1 pieces)
Holding brake...
€31.97
31,97 € tax excl.
Kit includes:
Perforated and anodized aluminum rail reach 40 kg length 230 cm
Sliding carriage (2 pieces)
Door anchor bracket (2 pieces)
Carriage support Screw (2 pieces)
Lower guide (1 pieces)
Holding brake...
€15.57
15,57 € tax excl.
Adjustable drive system kit for parallel sliding doors.
System 2000 cannot be used with System 0600 and 0450
The kit includes:
Adjustable bottom guide (1 pcs)
Upper left hooks (2 pieces)
Upper right hooks (2...
€39.50
39,50 € tax excl.
Retractable adjustable coil spring system, pivot mounting with floor attachment without holeStainless steelLoad 45 KgArticle IN.05.199
€1.91
1,91 € tax excl.
Dimensions: 36 x 8 x 12Outdoor broom with sturdy bristles. Ideal for any type of surface, even rough, this product guarantees long life and the best resistance to daily stresses.
€4.00
4,00 € tax excl.
It's used for the production of doors, furniture, partitions, stands, hollow panels, construction of caravans, aircraft, boats and ventilation systems.
Technical data for 800x2100 mm doors:
Thickness: 35 mm...
€0.61
0,61 € tax excl.
Plug-in socket hook in black plastic
for snap hooking of the furniture foot
€1.53
1,53 € tax excl.
Koblenz side attachment bracket for track 0400, capacity 40kg
€75.28
75,28 € tax excl.
Characteristics: Multifunction adapter: Accurate measurements from edges and corners Quick Commands: Allows quick access to the most used functions Illuminated 3-line display: values can be easily read in...
€0.98
0,98 € tax excl.
Dimensions: 120 x diam 2.1Basic fixed metal handle for brooms, mop Length 130 cmDiametro 21 mm, lunghezza 120 cm
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Italiano
Français
Deutsch
Español