€25.41
25,41 € tax excl.
Track drilled and anodized aluminum for sliding door system Koblenz, length 2 Mt capacity 40 Kg
Adjustable Koblenz drive kit for parallel sliding doors
Reference:
2000
Adjustable drive system kit for parallel sliding doors.
System 2000 cannot be used with System 0600 and 0450
The kit includes:
Adjustable bottom guide (1 pcs)
Upper left hooks (2 pieces)
Upper right hooks (2 pieces)
Wrench adjustment grain (1 pieces)
CHARACTERISTICS:
Function : Allows you to connect two parallel sliding doors
Use : For rigid wooden doors 40/45/50 mm thick
Adjustment: The lower guide nib can be adjusted according to the thickness of the door
€15.57
15,57 € tax excl.
Add to wishlist
You may also like
other products in the same category:
€218.03
218,03 € tax excl.
Magic2 is the multi-patented system, designed and produced by Terno Scorrevoli, totally Made in Italy. A product that integrates the magic of architectural minimalism and the smoothness of an extremely tested system -...
€12.00
12,00 € tax excl.
Specifications:
For wooden doors maximum capacity 50 kg
Drilling: Ø 35 mm
Wheel 30 mm
Finish: Bronze
Complete kit with:
2 pieces bottom slide
2 pieces top guide
4 pieces retainers
€20.49
20,49 € tax excl.
Aluminium profile 3 meters for glass-front cabinets.
Material: Anodised aluminumFinishing: Brushed silver
€2.21
2,21 € tax excl.
Steel roller with delrin wheel for sliding doors
Available wheel sizes
Ø 18 mm - centre to centre distance 4 cm (1333.000.00)
Ø 24 mm - centre to centre distance 6 cm (1332.000.00)
€11.22
11,22 € tax excl.
Steel rod for sliding picture holder "museo", polished stainless steel finish.
Available in 2 measures: 1,5 and 2 meters
Measures looks image.
€5.90
5,90 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.002.00
Specifications:
D - 9,5 mm diameter
P - Thickness 3,2 mm
B - Hole Ø 4,76 mm
Out-of-StockSold out
€51.64
51,64 € tax excl.
Galvanized guide 60x15x3000 30/10 x Drilled for floor fixing
3-meter galvanized guide for Rolling Center Angula floor sliding doors.
The new guide designed and built for gates and doors, suitable for environments...
€102.46
102,46 € tax excl.
Kit including: 4 Steel rods 1,5 mt, polished stainless steel finish + 2 PVC rails 2,5 mt, white finish + 4 Sliding hooks, white finish.
Maximum capacity: 15 kg
Measures looks image.
€5.00
5,00 € tax excl.
Bearing diameter 24 mm rounded profile
Pad thickness 6 mm
Total thickness 27mm
Thickness without screw 20.4 mm
Screw thickness 6.6 mm
Screw pitch 6MA
Pin hole with 4MA pitch
Bearings...
€107.38
107,38 € tax excl.
Complete kit for sliding glass-front cabinets with 5/6 mm glass thickness.
€6.15
6,15 € tax excl.
nylon wheel 19 mm round gola
specifications:
Diameter 19 mm
Thickness of 6 mm
Round throat diameter 2,4 mm - 1,4 mm approximately
Hole Ø 5
€28.69
28,69 € tax excl.
Kit includes:
Perforated and anodized aluminum rail reach 40 kg length 150 cm
Sliding carriage (2 pieces)
Door anchor bracket (2 pieces)
Carriage support Screw (2 pieces)
Lower guide (1 pieces)
Holding brake...
€4.84
4,84 € tax excl.
Upper and lower 2-metre aluminum channel for sliding system 0310/7 and 0310/9.
€10.21
10,21 € tax excl.
Black drilled and anodized track Mt 1, capacity 50 kg for KIT 0200/4 KIT 0200/50 and KIT 0200-5/50.
€7.38
7,38 € tax excl.
nylon wheel 35 mm round gola
specifications:
Diameter 35 mm
Thickness of 7 mm
Round throat diameter 5 mm - 1,5 mm approximately
Hole Ø 6
€20.49
20,49 € tax excl.
Upper aluminum track for Koblenz System 1010 sliding system for double leaf capacity 40 Kg
€30.33
30,33 € tax excl.
Sliding system for folding door with opening via hinge 1133 for leaves up to 30 kg complete with 1 m aluminum track.
Minimum door thickness 28 mm.
€8.20
8,20 € tax excl.
nylon wheel 40 mm round Gola
specifications:Diameter 40 mmThickness of 10 mmRound throat diameter 6 mm - radius 3 mm approximatelyHole Ø 8
€4.39
4,39 € tax excl.
Ruota con cuscinetto per scorrevole Ø 32 mm con gola diametro 5 mm
Foro da 6 mm
Spessore ruota 8 mm
Spessore su boccola 10 mm
€72.50
72,50 € tax excl.
Rail + beam in aluminum 2 mt. with ovals cut for distance from the wall mm.18 for sliding wooden doors.
Material: Anodised aluminum
Finishing: Brushed silver anodized / Black electro color
€40.28
40,28 € tax excl.
Sliding system 0205/1 with trolley for wooden folding door with embossing and with rail 1 mt.
SYSTEM 0200-5/50 capacity 50 kg.
€24.43
24,43 € tax excl.
Driving pair wooden drawer with Movento BLUM with Blumotion S full extension concealed with soft closing
EXTRA DISCOUNT FOR PACKAGING
(Excluding drawer coupling clutches)
FEATURES:
Concealed full extension with...
€221.31
221,31 € tax excl.
€6.48
6,48 € tax excl.
nylon wheel 24 mm round gola
specifications:
Diameter 24 mm
Thickness of 7 mm
Round throat diameter 5 mm - radius 2,5 mm approximately
Hole Ø 5
€3.75
3,75 € tax excl.
Sliding hook for sliding picture holder "museo", white finish.
Measures looks image.
€27.46
27,46 € tax excl.
Nylon wheel 1 bearing with round groove, Ø 64x80 mm complete with bolt article 400NY.80 / 16 Combi
Measurements as shown in the images.
€5.66
5,66 € tax excl.
Round nylon wheel with flared hole with bearing for sliding door.
External diameter of the wheel 19 mm: Ø flared inner 7 mm, Ø opposite inner 5 mm, Thickness 5 mm
External diameter of the wheel 23-25-27 mm: Ø...
€70.05
70,05 € tax excl.
System 9400 5
Kit 2 cart for wardrobe with internal sliding door cushioned.
FEATURES:
The 9400 system is a new cushioned wardrobe mechanism, allowing to create 2 or 3 shutters with overlapping doors.
The doors...
€53.52
53,52 € tax excl.
Sliding system 0500 with zamak trolleys, available with 2-wheel trolleys on independent bearings for capacities up to 60 kg. Ideal for making wooden sliding doors both inside and outside the wall. With the ABS system...
€16.78
16,78 € tax excl.
System 9400 4 SUP
Kit consisting of 6 Locking clip and 6 Anchor dowel.
Fastening system by quick coupling without screws.
Adaptable to any thickness.
It includes standard holes mm 32, diameter 8 mm and 5 mm on...
€62.59
62,59 € tax excl.
Long nylon guide olive with support to be fixed for 452PST Combi sliding gates
Diameter Ø 41x240
€2.05
2,05 € tax excl.
Lower carriage delrin wheel for glass-front cabinets.
Material: Metal, DelrinFinishing: Nichel
Customers who bought this product also bought:
€6.48
6,48 € tax excl.
Flat hinge for Salice furniture with Ø 35 mm hole suitable for wooden doors of different thickness, door opening up to 110 ° with base plate for mounting on the side and accompanying screws
€30.33
30,33 € tax excl.
Kit includes:
Perforated and anodized aluminum rail reach 40 kg length 190 cm
Sliding carriage (2 pieces)
Door anchor bracket (2 pieces)
Carriage support Screw (2 pieces)
Lower guide (1 pieces)
Holding brake...
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Italiano
Français
Deutsch
Español