€6.56
6,56 € tax excl.
Koblenz upper rail silver anodized (bronze)
Length Mt 2
Sliding system kit for wooden doors 0105 Koblenz capacity 60 Kg
Reference:
0105/1
Ideal for making customized wooden furniture and sliding doors
The Kit includes :
- Upper shoe (2 pieces)
- Lower carriage with ball bearings (2 pieces)
- Holding brake (2 pieces)
CHARACTERISTICS:
Function : Allows sliding doors for office or shop furniture
Capacity: 60 Kg per door
Usage : For doors and furniture
Functionality: Allows the adjustment of the already assembled leaf by acting on the eccentric wheel using a hexagonal key
Smoothness: Movement is low-sliding. The carriages are with double ground ball bearings covered in Delrin
Simplicity : The simplicity of the components allows for quick and easy installation at the same time
Adjustment : The carriages allow for height adjustment of the door
€12.30
12,30 € tax excl.
Add to wishlist
You may also like
€7.38
7,38 € tax excl.
Koblenz lower rail silver anodized (bronze)
Length Mt 2
other products in the same category:
€14.75
14,75 € tax excl.
Pair of sliding guide for drawer (DX/SX) Blum Tandembox Antaro/Intivo - Total extraction - Soft closing
Characteristics:
Capacity 30kg (578) or 50Kg (579)
Length: 270/350/400/450/550/600/650 mm
€5.67
5,67 € tax excl.
Sliding system with lower carriage and upper sliding block for 35mm hole furniture door
The kit art. 0310/7 capacity 23 kg contains:
Lower carriage with Delrin wheel 2 pcs
Upper sliding block 2 pcs...
€7.38
7,38 € tax excl.
nylon wheel 35 mm round gola
specifications:
Diameter 35 mm
Thickness of 7 mm
Round throat diameter 5 mm - 1,5 mm approximately
Hole Ø 6
€155.70
155,70 € tax excl.
Sliding system kit for wardrobe with 3 overlapping doors with 6 air-cushioned stops and 6 snap guides for doors up to 80kg.
Maximum door thickness 28 mm.
the kit does not include the upper and lower rails which...
€34.84
34,84 € tax excl.
Sliding system 0500 with zamak trolleys, available with 2-wheel trolleys on independent bearings for capacities up to 60 kg or with 4 for capacities up to 120 kg. Ideal for making wooden sliding doors both inside and...
€109.02
109,02 € tax excl.
Evolution single door, double-staved metal panels DX51 Z100 with thickness 0.7, anodised aluminum rail AW6060 10 micron, fit for a single door, the doors shall be flat and fit for sliding into a pocket wall. Maximum...
€6.48
6,48 € tax excl.
nylon wheel 22 mm round gola
specifications:
Diameter 22 mm
Thickness of 7 mm
Round throat diameter 4,2 mm - 1,8 mm approximately
Hole Ø 6
€25.41
25,41 € tax excl.
Track drilled and anodized aluminum for sliding door system Koblenz, length 2 Mt capacity 40 Kg
€1.53
1,53 € tax excl.
Koblenz side attachment bracket for track 0400, capacity 40kg
€2.21
2,21 € tax excl.
Steel roller with delrin wheel for sliding doors
Available wheel sizes
Ø 18 mm - centre to centre distance 4 cm (1333.000.00)
Ø 24 mm - centre to centre distance 6 cm (1332.000.00)
€16.39
16,39 € tax excl.
Adjustable retractable bracket
- Track to be purchased separately -
The kit includes:
- Trolley with retractable zamak bracket (2 pieces)
- Bottom guide (1 pieces)
- Holding brake (2 pieces)
- Adjustment...
€33.61
33,61 € tax excl.
Partial extraction guide for horizontal mounting FR 206 capacity 100 kg.
Sturdy extra heavy sheet metal thickness 3 mm.
Suitable for drawers and shelves.
Technical data:
- Material galvanized or painted...
€18.77
18,77 € tax excl.
System Caimi Export 9400 17
Fastening system by quick coupling without screws.
Adaptable to any thickness.
It includes standard holes mm 32, diameter 8 mm and 5 mm on the top and bottom of the wardrobe.
It...
€5.74
5,74 € tax excl.
Bottom floor T-guide article 2855 for 10 mm milled channel.
Spare part for Magic2 sliding door system.
Measures looks image.
€5.00
5,00 € tax excl.
Bearing diameter 19 mm
Pad thickness 5.6 mm
Total thickness 24mm
Thickness without screw 18 mm
Screw thickness 6 mm
Screw pitch 5MA
Pin hole with 4MA pitch
Bearings particularly suitable for use...
€80.33
80,33 € tax excl.
Evolution single door, double-staved metal panels DX51 Z100 with thickness 0.7, anodised aluminum rail AW6060 10 micron, fit for a single door, the doors shall be flat and fit for sliding into a pocket wall. Maximum...
€1.64
1,64 € tax excl.
Ball bearing wheel in PA suitable for sliding furniture drawer runners etc.
- Diameter 23 - 25 - 28 - 30 mm
€30.33
30,33 € tax excl.
Sliding system for folding door with opening via hinge 1133 for leaves up to 30 kg complete with 1 m aluminum track.
Minimum door thickness 28 mm.
€8.12
8,12 € tax excl.
Nylon wheel Ø 46.5 mm with round recess
Specifications:
- product dimensions: hole 8 mm(ID) diameter 46.5 mm(OD) thickness 10.5 mm(Thickness)
- U groove size : 5mm(Width)*5mm(Depth)*36.5mm(diameter)
- Material:...
€102.46
102,46 € tax excl.
Kit including: 4 Steel rods 1,5 mt, polished stainless steel finish + 2 PVC rails 2,5 mt, white finish + 4 Sliding hooks, white finish.
Maximum capacity: 15 kg
Measures looks image.
€108.00
108,00 € tax excl.
Extendable guide for simultaneous automatic opening folding table System 200
A = CLOSED MECHANISM MEASUREMENT
B = OPEN MECHANISM MEASUREMENT
A cm - inc
B cm - inc
TM 90
74 - 29.1"
174 - 68.5"...
€3.77
3,77 € tax excl.
Pair of micro guides with balls to be embedded in the wood. Maximum capacity 8 kg. The maximum capacity refers to the maximum load allowed per pair of guides (283 mm) with side mounting. Horizontal mounting of the...
€6.97
6,97 € tax excl.
Adjustable built-in sliding trolley with Ø 25 mm nylon wheel, for cabinet door with half moon support in nickel-plated iron 60 x 37 mm
Nylon wheel Ø 25 mm Round groove
Specifications:
Diameter 25 mm
Thickness...
€5.00
5,00 € tax excl.
Wheel diameter 22 mm
Pad thickness 6 mm
Total thickness 26.8 mm
Thickness without screw 20 mm
Screw thickness 6.8 mm
Screw pitch 6MA
Materials:
Nylon coated brass outer ring
Brass pin
Ball cage...
€3.39
3,39 € tax excl.
black plastic support for lower guide for sliding door with two holes, 5 mm thick
Out-of-StockSold out
€15.49
15,49 € tax excl.
Lower slider for internal door.
L (Left) R (Right)
€15.57
15,57 € tax excl.
Adjustable drive system kit for parallel sliding doors.
System 2000 cannot be used with System 0600 and 0450
The kit includes:
Adjustable bottom guide (1 pcs)
Upper left hooks (2 pieces)
Upper right hooks (2...
€4.84
4,84 € tax excl.
Bearing wheel for sliding shower enclosure door.
- Wheel Outer Diameter: 23mm
- Wheel Inner Diameter: 5mm
- Wheel thickness: 7mm
FEATURES:
High load capacity, very resistant product
For glass doors of...
€9.02
9,02 € tax excl.
nylon wheel 45mm round Gola
specifications:Diameter 45 mmThickness of 11,5 mm (thickness 13 mm with bushing)Round throat diameter 6 mm - radius 3 mm approximatelyHole Ø 8
€5.00
5,00 € tax excl.
Wheel diameter 22 mm
Pad thickness 4.2 mm
Total thickness 26mm
Thickness without screw 19.6 mm
Screw thickness 6 mm
Screw pitch 6MA
Bearings particularly suitable for use in shower enclosures...
€78.01
78,01 € tax excl.
Rail + beam in aluminum 3 mt. with ovals cut for distance from the wall mm.12 for sliding wooden doors.
Material: Anodised aluminum
Finishing: Brushed silver anodized
€55.13
55,13 € tax excl.
Rail + beam in aluminum 2 mt. with ovals cut for distance from the wall mm.12 for sliding wooden doors.
Material: Anodised aluminum
Finishing: Brushed silver anodized
Customers who bought this product also bought:
€3.52
3,52 € tax excl.
FEATURES:
Material: Wood
Application: furniture, interior doors
Operation: hinged, sliding
Available colors: White - Brown - Black
A= Seal gap 2 mm minimum to 13 mm maximum
B= Groove width 3 mm nominal
C=...
€15.57
15,57 € tax excl.
Dimensions: 60 x 17 x from 90 to 130
Floor mop with cotton cloth, wide cleaning surface. The cotton bristles attract and trap dirt, dust and hair from all types of floor. The Pivoting head allows to clean...
€7.38
7,38 € tax excl.
Koblenz lower rail silver anodized (bronze)
Length Mt 2
€6.56
6,56 € tax excl.
Koblenz upper rail silver anodized (bronze)
Length Mt 2
€18.49
18,49 € tax excl.
BINDAN-B4 One component is supplied in sizes: 600 g, 800 g, 5 kg, 10 kg, 25 kg, 150Kg.
Without fillers, resistant to water and mold. Bindan B4 reaches the B4 properties through precious resins, without the addition...
€2.05
2,05 € tax excl.
Internal glue side, ideal for containing and joining profiles in plastic, aluminum and many other packagings. Thanks to the silent and rapid performance, the spool of stretch film require a minimum effort of...
€5.33
5,33 € tax excl.
Dimensions: 35 x 4 x 17
Professional lightweight window washer with cloth. The internal cylindrical structure ensures uniform cleaning at every inclination. Great solidity and lightness for easy use even at higher...
€24.51
24,51 € tax excl.
Adjustable roller support, supports large pieces up to 80 kg.
Adjustable height min-max: 69 - 109 cmRoller width: 28 cmNet weight: 4.4 kg
€2.42
2,42 € tax excl.
TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...
€13.85
13,85 € tax excl.
Electronic bathroom scale in tempered glass
Maximum load 180 Kg - Division 0.1 Kg - Switch on with foot pressure and automatic switch off - Large LCD display.
Supplied WITHOUT batteries.
Measurements: footboard...
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Italiano
Français
Deutsch
Español