€13.85
13,85 € tax excl.
Plastic rail 3 mt. for upper rail Art. 1604 for glass-front cabinets.
Material: Plastic
Finishing: Grey
Complete Sliding system Kit for 6 doors, glass-front cabinets, up to 3 meters Series 1600
Reference:
Vetrina1600/6
Complete kit for sliding glass-front cabinets with 5/6 mm glass thickness.
€107.38
107,38 € tax excl.
Add to wishlist(1)
You may also like
€2.05
2,05 € tax excl.
Lower carriage delrin wheel for glass-front cabinets.
Material: Metal, DelrinFinishing: Nichel
€16.39
16,39 € tax excl.
Lower rail 3 meter for glass-front cabinets.
Material: Anodised aluminum
Finishing: Brushed silver
€29.51
29,51 € tax excl.
Upper rail 3 meters for glass-front cabinets.
Material: Anodised aluminumFinishing: Brushed silver
€16.31
16,31 € tax excl.
Lock for E-G showcase profiles, Serrature Series, keys available in 150 combinations, on request you can have quantities with a single combination.
Assembly: Remove the front panel, insert the slide and block it at...
other products in the same category:
€4.84
4,84 € tax excl.
Bearing wheel for sliding shower enclosure door.
- Wheel Outer Diameter: 23mm
- Wheel Inner Diameter: 5mm
- Wheel thickness: 7mm
FEATURES:
High load capacity, very resistant product
For glass doors of...
€33.03
33,03 € tax excl.
Driving couple wooden drawer Movento BLUM with TIP-ON full extension concealed opening prizes - open TIP-ON
EXTRA DISCOUNT FOR PACKAGING
€8.11
8,11 € tax excl.
Sliding trolley with Ø 30 mm wheel and 70x30 mm fixed support for sliding system of furniture doors
Material: Aluminum, Nylon
Measurements as per images.
€258.20
258,20 € tax excl.
Sliding kit complete with 3-metre track, for wardrobe sliding system with 2 overlapping doors with 4 air-cushioned stops and 4 snap-on guides for doors up to 80kg capacity.
Maximum door thickness 28 mm.
€25.00
25,00 € tax excl.
360 ° swivel plate with hole Ø30 mm, maximum capacity 150 Kg
€312.00
312,00 € tax excl.
Extendable guide for table with automatic simultaneous opening System 300 Three sizes: T.A. 130, T.A. 160, T.A. 180, T.A. 200 A = CLOSED MECHANISM MEASUREMENT B = OPEN MECHANISM MEASUREMENT
ART.
A cm
B cm...
€32.21
32,21 € tax excl.
System Caimi Export 9400 3
- 3 m track made of anodized extruded aluminium.
Rail fixing system by means of quick coupling, without visible screws.
- Adaptable to any thickness.
- Provides standard 32 mm holes,...
€10.88
10,88 € tax excl.
Foot with integrated wheel, for furniture that needs to be moved. By simply lifting the cabinet, the wheel comes out of the foot.
Features:
To be inserted by pressure
Wheel Ø 30 mm
Capacity 30 kg/wheel
Plastic...
€177.05
177,05 € tax excl.
Magic2 is the multi-patented system, designed and produced by Terno Scorrevoli, totally Made in Italy. A product that integrates the magic of architectural minimalism and the smoothness of an extremely tested system -...
€5.74
5,74 € tax excl.
Bottom floor T-guide article 2855 for 10 mm milled channel.
Spare part for Magic2 sliding door system.
Measures looks image.
€15.16
15,16 € tax excl.
Stop-retarder for Star series wardrobe sliding system, air-cushioned mechanism to be inserted on the track for Terno Scorrevoli sliding doors
Max capacity 80 Kg
Finish: Grey
€14.75
14,75 € tax excl.
Koblenz adjustable sliding system kit for single hanging door article 1011/8
Track to be purchased separately
The Kit includes :
- Adjustable carriage with 2 bearings (2 pieces)
- Adjustable lower eccentric...
€19.26
19,26 € tax excl.
The Kit includes :
Upper sliding carriage (1 pieces)
Bottom shoe for rail (1 pieces)
Side zipper (2 pieces)
Central hinge (1 pieces)
Adjustable central hinge (1 pieces)
CHARACTERISTICS:
Function : Allows...
€4.10
4,10 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.006.00
Specifications:
D - 16mm diameter
P - Thickness 5 mm
B - Hole Ø 5 mm
€55.13
55,13 € tax excl.
Rail + beam in aluminum 2 mt. with ovals cut for distance from the wall mm.12 for sliding wooden doors.
Material: Anodised aluminum
Finishing: Brushed silver anodized
€61.64
61,64 € tax excl.
The Kit includes :
Scroll trolley (2 pieces)
Door anchor profile (1 pcs)
Trolley anchor profile (2 pieces)
Bottom guide (1 pieces)
Holding brakes (2 pieces)
CHARACTERISTICS:
Function : Allows you...
€6.00
6,00 € tax excl.
Sliding gasket for one drawer in lacquered steel, with lower angle fixing
€6.15
6,15 € tax excl.
nylon wheel 19 mm round gola
specifications:
Diameter 19 mm
Thickness of 6 mm
Round throat diameter 2,4 mm - 1,4 mm approximately
Hole Ø 5
Out-of-StockSold out
€51.64
51,64 € tax excl.
Galvanized guide 60x15x3000 30/10 x Drilled for floor fixing
3-meter galvanized guide for Rolling Center Angula floor sliding doors.
The new guide designed and built for gates and doors, suitable for environments...
€2.79
2,79 € tax excl.
Fixed wheel with metal fixing bracket suitable for linear sliding for chests of drawers and furniture in general.
Features:
Hard sliding surface
Wheel 30 mm
Load bearing capacity 40 kg
Colour/finish Wheel:...
€108.00
108,00 € tax excl.
Extendable guide for simultaneous automatic opening folding table System 200
A = CLOSED MECHANISM MEASUREMENT
B = OPEN MECHANISM MEASUREMENT
A cm - inc
B cm - inc
TM 90
74 - 29.1"
174 - 68.5"...
€221.31
221,31 € tax excl.
€286.89
286,89 € tax excl.
Sliding kit complete with 3-metre track, for wardrobe sliding system with 3 overlapping doors with 6 air-cushioned stops and 6 snap-on guides for doors up to a capacity of 80kg.
Maximum door thickness 28 mm.
€13.85
13,85 € tax excl.
Plastic rail 3 mt. for upper rail Art. 1604 for glass-front cabinets.
Material: Plastic
Finishing: Grey
€274.00
274,00 € tax excl.
FEATURES:
Steel
Load rating up to 272 kg
100% extension
19.1 mm slide thickness
Slides sold singly
Available in lengths from 254 mm to 1524 mm (SL)
Measures looks image or technical data sheet.
€14.43
14,43 € tax excl.
Koblenz adjustable sliding kit for single leaf 25 mm capacity 40 kg
Accessory Kit with bearing for 1 leaf from 25 mm
The Kit includes:
Adjustable angled carriage with 2 bearings (2 pieces)
Lower eccentric...
€18.77
18,77 € tax excl.
System Caimi Export 9400 17
Fastening system by quick coupling without screws.
Adaptable to any thickness.
It includes standard holes mm 32, diameter 8 mm and 5 mm on the top and bottom of the wardrobe.
It...
€13.93
13,93 € tax excl.
Specifications:
For wooden doors maximum capacity 40 kg
Drilling: Ø 35 mm
Finish: Bronze - Galvanized
Complete kit with:
2 pieces bottom slide
2 pieces top spring guide
2 pieces upper retainers
€102.46
102,46 € tax excl.
System 9400 6
Kit 2 cart for wardrobe with external sliding door cushioned.
FEATURES:
The 9400 system is a new cushioned wardrobe mechanism, allowing to create 2 or 3 shutters with overlapping doors.
The doors...
€5.33
5,33 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.007.00
Specifications:
D - 19 mm diameter
P - Thickness 6 mm
B - Hole Ø 6 mm
Customers who bought this product also bought:
€20.49
20,49 € tax excl.
Aluminium profile 3 meters for glass-front cabinets.
Material: Anodised aluminumFinishing: Brushed silver
€29.51
29,51 € tax excl.
Upper rail 3 meters for glass-front cabinets.
Material: Anodised aluminumFinishing: Brushed silver
€16.31
16,31 € tax excl.
Lock for E-G showcase profiles, Serrature Series, keys available in 150 combinations, on request you can have quantities with a single combination.
Assembly: Remove the front panel, insert the slide and block it at...
€2.05
2,05 € tax excl.
Lower carriage delrin wheel for glass-front cabinets.
Material: Metal, DelrinFinishing: Nichel
€6.80
6,80 € tax excl.
3 meter PVC profile for showcase door.
Material: gray PVC
€18.03
18,03 € tax excl.
Replacement bucket for Inoxa waste bin complete with lid and handles
Measurements 30 x 21 cm
Height 23 or 30 cm
€16.39
16,39 € tax excl.
Lower rail 3 meter for glass-front cabinets.
Material: Anodised aluminum
Finishing: Brushed silver
€13.85
13,85 € tax excl.
Plastic rail 3 mt. for upper rail Art. 1604 for glass-front cabinets.
Material: Plastic
Finishing: Grey
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Italiano
Français
Deutsch
Español