€14.25
14,25 € tax excl.
Aluminum rail 1 mt. for folding doors.
Material: Anodised aluminum
Finishing: Brushed silver - Natural raw
Accessory set for folding sliding door with 1 m aluminum track FOLDY series
Reference:
FOLDY
Sliding system for folding door with opening via hinge 1133 for leaves up to 30 kg complete with 1 m aluminum track.
Minimum door thickness 28 mm.
€30.33
30,33 € tax excl.
Add to wishlist
You may also like
€17.75
17,75 € tax excl.
Sliding system Kit for folding doors with pivot 1133 for doors up to 30 kg.
Minimum thickness of the door 28 mm.
Binary art.2670 to be purchased separately (not included)
other products in the same category:
Out-of-StockSold out
€51.64
51,64 € tax excl.
Galvanized guide 60x15x3000 30/10 x Drilled for floor fixing
3-meter galvanized guide for Rolling Center Angula floor sliding doors.
The new guide designed and built for gates and doors, suitable for environments...
€15.57
15,57 € tax excl.
Upper aluminum track for Koblenz System 1010 sliding system for single leaf capacity 40 Kg
€5.74
5,74 € tax excl.
Upper and lower 3 meter brown nylon channel for sliding system 0310/7 and 0310/9.
€13.93
13,93 € tax excl.
Specifications:
For wooden doors maximum capacity 40 kg
Drilling: Ø 35 mm
Finish: Bronze - Galvanized
Complete kit with:
2 pieces bottom slide
2 pieces top spring guide
2 pieces upper retainers
€16.39
16,39 € tax excl.
Lower rail 3 meter for glass-front cabinets.
Material: Anodised aluminum
Finishing: Brushed silver
€72.50
72,50 € tax excl.
Rail + beam in aluminum 2 mt. with ovals cut for distance from the wall mm.18 for sliding wooden doors.
Material: Anodised aluminum
Finishing: Brushed silver anodized / Black electro color
€10.21
10,21 € tax excl.
Black drilled and anodized track Mt 1, capacity 50 kg for KIT 0200/4 KIT 0200/50 and KIT 0200-5/50.
€4.84
4,84 € tax excl.
Upper and lower 2-metre aluminum channel for sliding system 0310/7 and 0310/9.
€9.84
9,84 € tax excl.
Upper and lower aluminum track for sliding door 0320 Koblenz
without recess or drilling, easy to apply
€2.87
2,87 € tax excl.
Steel roller with delrin wheel with groove Ø 24 mm hole spacing centre to centre distance 6 cm
€40.28
40,28 € tax excl.
Sliding system 0200/1 with trolley for wooden folding doors and rail 1 mt.
SYSTEM 0200/50 capacity 50 kg.
€109.02
109,02 € tax excl.
Evolution single door, double-staved metal panels DX51 Z100 with thickness 0.7, anodised aluminum rail AW6060 10 micron, fit for a single door, the doors shall be flat and fit for sliding into a pocket wall. Maximum...
€53.28
53,28 € tax excl.
Sliding system 0850/250 with trolley for wooden doors
Kit Art. 0850/3 capacity 250 kg
€12.38
12,38 € tax excl.
Pair of carriages, upper and lower, polished chrome, suitable for most shower boxes.
Material: Nylon Wheels, Chromed plastic core
Glass thickness: 4-6 mm
Weight: 80g
Glass mounting hole diameter: 10-13 mm...
€286.89
286,89 € tax excl.
Sliding kit complete with 3-metre track, for wardrobe sliding system with 3 overlapping doors with 6 air-cushioned stops and 6 snap-on guides for doors up to a capacity of 80kg.
Maximum door thickness 28 mm.
€6.00
6,00 € tax excl.
Sliding gasket for one drawer in lacquered steel, with lower angle fixing
Out-of-StockSold out
€245.08
245,08 € tax excl.
Sliding system Kit for doors with external Rail 3 mt. with 5 fixing points, 2 brackets and all the mounting accessories included.
Rail: Height 60 mm, Thickness 5 mm
Iron wheel: Ø 57 mm, Thickness 17 mm
Capacity: 80...
€7.30
7,30 € tax excl.
nylon wheel 29mm round gola
specifications:
Diameter 29 mm
Thickness of 8 mm
Round throat diameter 4 mm - radius 2 mm approximately
Hole Ø 8
€228.69
228,69 € tax excl.
Magic2 is the multi-patented system, designed and produced by Terno Scorrevoli, totally Made in Italy. A product that integrates the magic of architectural minimalism and the smoothness of an extremely tested system -...
€7.30
7,30 € tax excl.
U-shaped support in tropicalized iron 50 x 26 x 15 mm
Nylon wheel Ø 30 mm Round groove
Specifications:
Diameter 30 mm
Thickness 10 mm (Thickness with bushing 11 mm)
Round throat diameter 6 mm - radius 3 mm...
€5.00
5,00 € tax excl.
Wheel diameter 22 mm
Pad thickness 6 mm
Total thickness 26.8 mm
Thickness without screw 20 mm
Screw thickness 6.8 mm
Screw pitch 6MA
Materials:
Nylon coated brass outer ring
Brass pin
Ball cage...
€9.02
9,02 € tax excl.
nylon wheel 45mm round Gola
specifications:Diameter 45 mmThickness of 11,5 mm (thickness 13 mm with bushing)Round throat diameter 6 mm - radius 3 mm approximatelyHole Ø 8
€6.15
6,15 € tax excl.
Bearing wheel for sliding shower enclosure door.
- Wheel Outer Diameter: 28 mm
- Wheel Inner Diameter: 6 mm
- Wheel thickness: 7 mm
FEATURES:
High load capacity, very resistant product
For glass doors of...
€40.48
40,48 € tax excl.
Features:
Colour/Finish light grey, RAL 7035
Can be used both left and right
Field of application for sash weight up to 80 kg
Plastic execution
For door thickness ≤25 mm (Load capacity 25 kg)
Length 327mm...
€5.33
5,33 € tax excl.
Nylon wheel Ø 16 mm flat type
Specifications:
- Diameter 16 mm
- Thickness 5.5 mm
- Hole Ø 5 mm
€1.16
1,16 € tax excl.
Koblenz side attachment bracket for track 0500, capacity 80kg
€39.46
39,46 € tax excl.
Pair of telescopic slides in white painted steel with total extraction for drawers for horizontal mounting, maximum dynamic load of 50 Kg.
Available size (L): from 200 to 800 mm
Features:
Lateral stability thanks...
Out-of-StockSold out
€5.00
5,00 € tax excl.
Materials:
Outer rings and pins in AVP steel - Coating in Nylon 6/6 loaded with fiberglass - Balls in Cr TMP steel.
- Wheel diameter 22 mm(D),
- Internal hole diameter 6 mm(d),
- Inner ring diameter 10...
€21.80
21,80 € tax excl.
Upper aluminum track for Koblenz sliding system for folding doors for wardrobes, length 1.5 m, capacity 40 kg
€15.93
15,93 € tax excl.
Silent sliding guide on balls, capacity 30 Kg, Profile to be applied to the side with plastic insert for locking in closing, GalvanizedMaximum capacity 30 kg.The maximum capacity refers to the maximum load allowed per...
€108.00
108,00 € tax excl.
Extendable guide for simultaneous automatic opening folding table System 200
A = CLOSED MECHANISM MEASUREMENT
B = OPEN MECHANISM MEASUREMENT
A cm - inc
B cm - inc
TM 90
74 - 29.1"
174 - 68.5"...
€33.61
33,61 € tax excl.
Partial extraction guide for horizontal mounting FR 206 capacity 100 kg.
Sturdy extra heavy sheet metal thickness 3 mm.
Suitable for drawers and shelves.
Technical data:
- Material galvanized or painted...
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Italiano
Français
Deutsch
Español