Electric lock with rotating spike for sliding gates Viro V09
V09 electric lock is the only extremely high-reliability lock specially designed for use on outdoor, manual or automated sliding gates.
The special spike mechanism will tolerate a thermal expansion in the dimensions of sliding gates of up to 9.6 mm A thermal expansion of 9.6 mm is the equivalent to a change in temperature of 100° C for a gate which is 8 metres long. Also suitable for manual sliding gates (fitted with a double through cylinder).
It is easy to use, has a pleasing appearance, and cannot be attacked from the outside. It is weatherproof.
V09 electric lock, thanks to the installation kit, is also ideal for garage sectional doors and motorised shutters.
Technical data:
- Installation: horizontal on the fixed upright of the sliding gate; or vertical, with accessories, on the inside of the sectional door and motorised shutters
- Backset: 50 mm
- Opening impulse time: controlled by an electronic board, can be interfaced with automation systems
- Replaceable coil
- Voltage: 12V or 24V A.C. or D.C. (24V recommended)
- Case: one-piece galvanized steel, with cable entry on the back (for maximum protection) or on the side (opening a prepunched hole)
- Cover: galvanized steel, with automatic security block when the lock is closed
- Rotating spike dead-bolt: highly collision-proof, inserted in steel guides, protected by case-hardened steel rotating rings, operated by stainless steel springs. Guides and rotating rings treated with "NIPLOY PROCESS" nickel plating, anticorrosion
- Cylinder: version suitable for profile half cylinder with length 40 mm (30+10) with DIN or universal cam (item 1.772.9 provided)
- Mechanism: (of the half cylinder provided) brass pins; mushroom brass counterpins, pick-resistant; phosphor bronze pin springs
- Striker: galvanized steel, easily fitted thanks to the practical lock alignment template
- Supplied with: galvanized steel striker for horizontal installation (item 7905.217), galvanized steel roof-plate and striker plate, electronic board with possibility of interfacing with automation systems, Torx key for opening and closing cover, galvanised steel cylinder, nylon ring nut and plug, fixing screws
No customer questions for the moment.