Black Gas spring Stabilus LIFT-O-MAT for Effegi Brevetti
Gas spring Stabilus 200-250-300-350-400-450-500-550-600-630 Newton for Effegi Brevetti, replacement for arm mechanisms for kitchen cabinet doors.
- Stem diameter 6 mm
- Stem length 7.6 cm
- Body diameter 15 mm
- Body length 10.4 cm
- Total length open 18 cm
- Hole center distance 167 mm
17,50 € tax excl.
Add to wishlist(1)
other products in the same category:
5,65 € tax excl.
Set synchronization pinions TIP-ON (optional) plastic, color gray dust
1,64 € tax excl.
Universal key for locks for cabinet and furniture. Finishes: White - Bronze - Polished Chrome - Brass - Black
214,75 € tax excl.
Tecnoinox Inoxmatic draining board for corner units. The Modular series comes from a totally innovative idea, an AISI 304 stainless steel drainingboard with supports in clear plastic that can be easily adjusted and...
11,00 € tax excl.
FEATURES: Mounting to be screwed Application for Legs 38 x 38 mm Galvanized Steel Folding, with stop in opening and closing position
10,49 € tax excl.
Push-to-Close closure Pull-to-open, Grabber catch, side mount, material plastic
80,33 € tax excl.
Made of solid beechwood, suitable for the realization of tables, desks or consolle. Finishing: White Slit: 12 cm Dimensions: 7x5xh75 cm
373,89 € tax excl.
14,00 € tax excl.
Arm for upward opening and vasistas article 600
6,23 € tax excl.
Snap pin without a stop in the open position, material steel
13,73 € tax excl.
Couple Drawer Guide (DX / SX) Blum Tandembox Antaro/Intivo - Full extension - Soft close
17,95 € tax excl.
FEATURES: Foot Ø 58 height 250 mm with M10 threaded bush for drawers, small furnishing accessories, tables etc. Available Walnut. Available with wheel: Double wheel OgTM (DISKY 2) zama Ø 80, with rubber and brake load...
147,54 € tax excl.
FEATURES: - Total length 475 mm -Length 460 mm from eyelet center to eyelet center. - 180 mm stroke. -Diameter 8/19 mm. -400 N thrust. - Eyelet attachments. -To be moved only on the bed base and with the...
21,45 € tax excl.
Grey Gas spring Stabilus Lift-O-Mat 198 mm NEWTON: 200-280-300-350-375-400-420-450-480-510 Stem diameter 6 mm Stem length 8.8 cm Body diameter 15,6 mm Body length 11 cm Total length open 19.8 cm Hole center...
19,59 € tax excl.
Gas spring piston 100 Newton for Senso-Strato-Verso Huwil, replacement for arm mechanisms for kitchen cabinet doors. Stem diameter 6 mm Stem length 8.6 cm Body diameter 15 mm Body length 11.6 cm Total length open...
3,47 € tax excl.
Adjusting the left/right depth (optional) Blum Suitable for plastic T51.7601 gray-colored powder dust
0,77 € tax excl.
Pre-assembly platelets recommended Blum standard for Aventos HK-XS The spacer depends on the upper escape
24,59 € tax excl.
Fairlead modular KELAModular ducting system, separately accommodates variable diameter cables. Applied vertically and horizontallyIt is characterized by the soft lines and timeless. The modules that make it up are...
54,50 € tax excl.
Black Gas spring Stabilus Lift-O-Mat 485 mm
4,30 € tax excl.
Features: Series mounting of 32/37 holes Poor return of the flap door Can be used for small and light fronts even without flap stops (assembly test required) Arm: Steel cage, zinc die-cast arm Color / Finish:...
11,48 € tax excl.
FEATURES: 1 meter of mat made in polymeric compound Suitable for food contact Excellent resistence to ageing Available colours: White - Grey Measures looks image MINIMUM 3 METERS
57,30 € tax excl.
Straghtening couple in aluminium can be shortened in the lower part, by maximum 300 mm with adjustment from the top for light panels of maximum thickness of 20 mm. Rods length 2800 mm. Position the DX and SX uprights...
28,61 € tax excl.
For flaps made of wood or with aluminium frame, from frame width 45 mm. Supplied with: 1 support for door 1 fixing corner for furniture 1 fixing plate for flap door (for eurovites) Installation instructions...
8,20 € tax excl.
Application: For edge distance 28 and 37 mm Material: Zinc alloy Adjustable Soft-Closing Finish: Stay: Nickel plated If the Soft-Closing is used, the fixing bracket for the cabinet is not required. Other...
21,66 € tax excl.
Servetto Set of 4 Nylon supports for honeycomb wood panels for installing Servetto 2004/3000. Support with 450/480 mm distance between fixing holes. Available colors: White - Grey - Brown - Black Measures looks...
5,74 € tax excl.
Volpato cutlery trays gray for drawer 30 cm 32/72.N30GR, plastic material, produced by injection molding or vacuum forming, eco-friendly, certified for food contact, resistant to scratches. Length 240 mm, depth 490...
2,50 € tax excl.
Clutch with side adjustment for driving torque Movento Blum Plastic/Steel color Orange, To be ordered for left / right
4,10 € tax excl.
Adhesive black RAL9005 standard brush Hot-Melt, height 9 mm, pack 3 mt. A= 6,9 D=9 C=4 mm Suitable for sealing cabinet doors and sliding furniture doors.
27,79 € tax excl.
Southco folding support in anodized aluminum with spring cable for tables, shelves and folding accessories used in different environments, anti-overturning solutionLength: 330/165 mmMax capacity 100 kgAnodized...
77,87 € tax excl.
Blum SERVO-DRIVE drive unit for LEGRABOX drawers TANDEMBOX, TANDEM AND MoventoThe electrical support for motion control
2,70 € tax excl.
Clip top Blumotion standard hinge 110°, overlay application, boss: screw-on. EXTRA DISCOUNT FOR PACKAGING
5,66 € tax excl.
Round nylon wheel with flared hole with bearing for sliding door. External diameter of the wheel 19 mm: Ø flared inner 7 mm, Ø opposite inner 5 mm, Thickness 5 mm External diameter of the wheel 23-25-27 mm: Ø...
1,56 € tax excl.
Customers who bought this product also bought:
3,52 € tax excl.
Soft and ergonomic handle. Rigid and sharp blade for mastic removal, roller cleaning, to open can of paint. Metal knocker. Dimensions: Width 76 mm Length 224 mm Weight 250 g
3,50 € tax excl.
BISTUK WOOD is a two-component, spatulable polyester putty, formulated for grouting and finishing on wood, restoring missing parts, knots and edges. Easy to apply and sand, excellent verticability. Can be painted over...
38,52 € tax excl.
Grey Gas spring Stabilus Hydro-Lift for mechanism Salice for arm mechanisms for kitchen cabinet doors. NEWTON : 150-250-350-450-500-550-600-650 Stem diameter 8 mm Stem length 6.9 cm Body diameter 18 mm Body...
23,77 € tax excl.
Gas spring piston 400 Newton for Senso-Strato-Verso Huwil, replacement for arm mechanisms for kitchen cabinet doors. Stem diameter 6 mm Stem length 8.6 cm Body diameter 15 mm Body length 11.6 cm Total length open...
23,77 € tax excl.
Hinge for Ferrari Clip door 95 ° opening with hole for profiles, suitable for aluminum mobile door complete with base adjustable mounting plate on the mobile surface.Hinge with large opening for a maximum of 95 °...