Ash vacuum cleaner 20 Liter 1200W for hot ash CINDER 1203 Valex

Reference:
VALEX1350135

To vacuum hot ashes up to 40° from stoves, fireplaces and barbecues - Flexible hose with aluminum nozzle - Self-extinguishing HEPA cartridge filter with double internal/external metal filter - Fireproof pre-filter - Carry handle - Blowing function and vacuum cleaner kit.

Power 1200W

Drum capacity 20 Liter

Pipe 1.2 meters

Ø Tube 37 mm

Dimensions: wxdxh 275x275x380 mm

Net weight 3.9 Kg

€55.33
55,33 € tax excl.
Available in stock 1 Item
Add to wishlist
Product Details
VALEX1350135
Made IN
China
You may also like
€28.65
28,65 € tax excl.
For vacuuming ashes from stoves, fireplaces and barbecues - Flexible hose with aluminum nozzle - Washable HEPA cartridge filter with metal filter - Carrying handle - With blowing function - Net weight 2.4 Kg. Power...
other products in the same category:
€22.05
22,05 € tax excl.
- power W 135 - 11,500 oscillations / min - switch block YES - plate 187X90 mm - Ø orbits 2.0 mm - paper clip fastening - PREPARED dust extraction - soft grip NO - net weight 1,200 kg - Paper size 240x93mm
Fein Tapping Machine GWP 10
Out-of-StockSold out
€815.57
815,57 € tax excl.
Tapping fast and precise with reverse gear for work times smaller. (supplied without spindle)
€282.52
282,52 € tax excl.
Features:   - Possibility of dust extraction through bag   - Tape lock lever   - Labyrinth construction: extreme protection against dustTechnical data:   - Tape dimensions 100x610 mm   - Power consumption 1200 Watts...
€937.88
937,88 € tax excl.
Characteristics:    30 mm hexagonal connection    AVT vibration reduction system    Electronic speed regulator    LED signal indicating the wear of the brushesTechnical data:    Power absorbed 1510 W    Shot power 25...
€204.10
204,10 € tax excl.
Features: Possibility of adjusting the pendulum with 4 orbits and with blade change without tools Aluminum plate adjustable from 0° to 45° on 2 sides Speed regulator, slow start and constant speed under load for...
€745.08
745,08 € tax excl.
Characteristics:    Suitable for SDSMAX drills    LED lighting    LED indicator for brush wear and power supply problems    AVT system for dynamic vibration reduction    Soft noload: reduces vibrations even when not...
€261.00
261,00 € tax excl.
Microprocessor for progressive machine start-up, block against starting after power failure, peak current limitation for safe starting without current overload, electronic feedback. Equipped with a mechanical brake,...
€255.94
255,94 € tax excl.
Characteristics:    High tightening torque 73 Nm    Direct drive gears for high tightening torque    Large side handle    Electronic switch    Switch locking device for continuous use    Ideal for wood screws up to...
€299.18
299,18 € tax excl.
Characteristics:    Removal capacity from 0 to 4 mm    Quick replacement of knives    Chip discharge on both sidesTechnical data:    Rebate capacity 23 mm    Plate length 296 mm    Max removal 0 - 4.00 mm    Power...
€734.18
734,18 € tax excl.
Characteristics:    Suitable for SDSMAX drills    LED lighting    LED indicator for brush wear and power supply problems    AVT system for dynamic vibration reduction    Soft noload: reduces vibrations even when not...
€335.65
335,65 € tax excl.
Features: Chisel adaptable in 12 positionsAccepts SDS-PLUS tipsCruise controlElectronic switch Technical data: Power consumption 550 WImpact force 1,8 JRounds per minute 2000-3500Weight 3.2 kg Included...
Flex L1503 sander
Out-of-StockSold out
€324.59
324,59 € tax excl.
Lucidatrice classica con calotta di presa
€786.07
786,07 € tax excl.
Characteristics:    Cable/hose holder    Quick closing and opening hook    Vacuum power regulator    Stainless steel barrel    Air flow sensor    Larger diameter rear wheels for greater stability    Automatic...
€233.00
233,00 € tax excl.
Characteristics:    Rack chuck    Only 66 mm height of the tool head to ensure use in difficult to reach areas    Side holes for using additional handle    Speed ​​pre-selector applied on the switch    Selection of...
€193.95
193,95 € tax excl.
Spade Handle Drill spindle rack DS4012 rear handle "D" swivel of 24 positions, externally accessible brushes, ergonomic soft grip handle coating, reversibility, ideal for mixing glues, paints and for drilling holes...
€302.46
302,46 € tax excl.
Features: Pressure regulator Detergent tank (0.9l) and inspectable suction filter Rubber wheels Built-in hose reel Double Insulation Pressure adjustable spray lance Self priming function: Water can be...
€130.33
130,33 € tax excl.
Tilting belt device with workpiece guide - Simple belt change thanks to the clamping device. Power 350W - Revolutions per minute (belt) 286 - Manual belt alignment - Tilting belt plane 0 - 90°, Revolutions per minute...
€415.36
415,36 € tax excl.
Makita JS3201J shear Extended warranty for 3 years Features: Knife System with 4 cutting edgeshand protection for user safety during cutting Technical data: Steel cutting capacity 2.5 mmsteel cutting capacity 1.5...
Rifilatore ad immersione Makita 3706
Out-of-StockSold out
€319.67
319,67 € tax excl.
Characteristics:    Precise depth adjustment    LED work area lighting    New ergonomic handles    Ergonomic handleTechnical data:    Cylindrical shank Ø 12 mm    Stroke 70 mm    Power consumption 1850 W    Idle speed...
€264.80
264,80 € tax excl.
Characteristics:    Lock key for permanent arming    It is possible to mount abrasive fiber paper discs, resin pad and lamb cap    Velcro attachment    Self-detachable brushes accessible from the outside    Electronic...
€113.11
113,11 € tax excl.
Portable and compact double-blade saw ideal for cutting thin sheets and laminates of any material. Ingenious lubrication system particularly suitable for cutting mild steel and light alloys. Double carter to guarantee...
€81.89
81,89 € tax excl.
Electronic speed regulation - Torque control: constant speed under load - Disc lock button - Safety switch against accidental ignition - Soft rear handle. Power W 1150 No-load rpm 1150-3000 Switch block NO Disc ø...
€61.07
61,07 € tax excl.
power 710W - idle strokes / min 1,400-2,800 - mechanical speeds 1 - rotating head NO - inclined cut NO - blade stroke 20.00 mm - pendular movement NO - soft handle YES - net weight 2.200 kg
€299.18
299,18 € tax excl.
Features: 3 functions: rotation, percussion, rotation + percussion Ergonomic handle LED lighting to illuminate the work area Safety clutch Max Power Output 800W No-load speed 0 - 1100 min⁻¹ Pulses per minute...
€153.28
153,28 € tax excl.
Features: Dry grinding wheel 2950 rpm Ø150x20x16 mm GR36 Belt 50x686 mm GR100 Single-phase motor 230 V 50 Hz 0,40 kW Usage type S2-10 min Packaging dimensions 450x400x280h mm Net weight 8 Kg
Questions (0)

No customer questions for the moment.


Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Captcha

Settings

Menu

Create a free account to use wishlists.

Sign in