Trolley kit for Koblenz sliding door system, capacity 40 Kg - 0450 recessed brackets
Reference:
0450/3
Adjustable retractable bracket
- Track to be purchased separately -
The kit includes:
- Trolley with retractable zamak bracket (2 pieces)
- Bottom guide (1 pieces)
- Holding brake (2 pieces)
- Adjustment key (1 pieces)
CHARACTERISTICS:
Function : Allows you to slide a rigid door flush with the track
Capacity: 40 Kg per door
Usage : For rigid doors
Smoothness : Uses nylon trolleys, with Delrin wheels on bearings
Practicality: The movement is upper sliding, the lower compartment is thus free from encumbrances
Adjustment : The holding brake is adjustable according to the weight of the leaf.
For correct operation, make sure that the door has a uniform top and bottom stop.
€16.39
16,39 € tax excl.
Add to wishlist
You may also like
€25.41
25,41 € tax excl.
Track drilled and anodized aluminum for sliding door system Koblenz, length 2 Mt capacity 40 Kg
€1.53
1,53 € tax excl.
Koblenz side attachment bracket for track 0400, capacity 40kg
other products in the same category:
€205.00
205,00 € tax excl.
Sliding system Kit for doors with external Rail 2 mt. with 3 fixing points, 2 brackets and all the mounting accessories included.
Rail: Height 60 mm, Thickness 5 mm
Iron wheel: Ø 57 mm, Thickness 17 mm
Capacity: 80...
€9.75
9,75 € tax excl.
360 ° pivot with the turntable drilled Ø9 mm, maximum capacity 150 Kg
€62.59
62,59 € tax excl.
Long nylon guide olive with support to be fixed for 452PST Combi sliding gates
Diameter Ø 41x240
€4.84
4,84 € tax excl.
Wheel with bearing for sliding shower box with threaded connection and bolt or screw.
External diameter of the wheel 19 mm: Ø inner 4 mm, Thickness 4,5 mm
External diameter of the wheel 23-25-27 mm, Thickness 5,5...
€8.12
8,12 € tax excl.
Nylon wheel Ø 46.5 mm with round recess
Specifications:
- product dimensions: hole 8 mm(ID) diameter 46.5 mm(OD) thickness 10.5 mm(Thickness)
- U groove size : 5mm(Width)*5mm(Depth)*36.5mm(diameter)
- Material:...
€286.89
286,89 € tax excl.
Sliding kit complete with 3-metre track, for wardrobe sliding system with 3 overlapping doors with 6 air-cushioned stops and 6 snap-on guides for doors up to a capacity of 80kg.
Maximum door thickness 28 mm.
€2.05
2,05 € tax excl.
Steel roller steel wheel with groove for sliding doors Ø 18 mm ball bearing wheel
Available wheel sizes
Ø 18 mm - centre to centre distance 4 cm
€10.57
10,57 € tax excl.
Nylon wheel Ø 60 mm with U-shaped groove
Specifications:
- product dimensions: hole 12 mm - diameter 60 mm - thickness 14 mm
- U groove dimensions : width 9.5mm - depth 2,8mm - internal diameter 54mm
-...
€221.31
221,31 € tax excl.
€5.90
5,90 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.002.00
Specifications:
D - 9,5 mm diameter
P - Thickness 3,2 mm
B - Hole Ø 4,76 mm
€312.00
312,00 € tax excl.
Extendable guide for table with automatic simultaneous opening System 300 Three sizes: T.A. 130, T.A. 160, T.A. 180, T.A. 200 A = CLOSED MECHANISM MEASUREMENT B = OPEN MECHANISM MEASUREMENT
ART.
A cm
B cm...
€15.16
15,16 € tax excl.
Stop-retarder for Star series wardrobe sliding system, air-cushioned mechanism to be inserted on the track for Terno Scorrevoli sliding doors
Max capacity 80 Kg
Finish: Grey
€9.02
9,02 € tax excl.
Nylon wheel Ø 48 mm Round groove
Specifications:
Diameter 48 mm
Thickness 9mm
Round throat diameter 6 mm - radius approximately 3 mm
Hole Ø 8
€23.77
23,77 € tax excl.
Aluminum track for Koblenz sliding system for doors,
System 0500 with 80 Kg potato
€13.93
13,93 € tax excl.
Specifications:
For wooden doors maximum capacity 40 kg
Drilling: Ø 35 mm
Finish: Bronze - Galvanized
Complete kit with:
2 pieces bottom slide
2 pieces top spring guide
2 pieces upper retainers
€16.89
16,89 € tax excl.
End stop for sliding doors with floor fixing art. F 40 SZ Rolling Center
Measurements as per images.
€10.03
10,03 € tax excl.
Sliding system with lower carriage and upper sliding block for 35mm hole furniture door
The kit art. 0310/9 capacity 43 kg contains:
Lower carriage with Delrin wheel 2 pcs
Upper sliding block 2 pcs...
€15.57
15,57 € tax excl.
Adjustable drive system kit for parallel sliding doors.
System 2000 cannot be used with System 0600 and 0450
The kit includes:
Adjustable bottom guide (1 pcs)
Upper left hooks (2 pieces)
Upper right hooks (2...
€7.38
7,38 € tax excl.
nylon wheel 30mm round gola
specifications:
Diameter 30 mm
Thickness of 11 mm
Round throat diameter 6 mm - radius 3 mm approximately
Hole Ø 8
€45.08
45,08 € tax excl.
Koblenz spare trolley bracket for system kit for swing folding doors 0260/1-2 capacity 50Kg
- door to book
- fold holder
- sectioned door
trolley wheel diameter d.12 mm
€16.35
16,35 € tax excl.
Sliding trolley with Ø 45 mm wheel and 145x50 mm support for sliding system of wardrobes and cabinet doors
Material: Aluminum, Nylon
Measurements as per images.
€6.97
6,97 € tax excl.
Adjustable built-in sliding trolley with Ø 25 mm nylon wheel, for cabinet door with half moon support in nickel-plated iron 60 x 37 mm
Nylon wheel Ø 25 mm Round groove
Specifications:
Diameter 25 mm
Thickness...
€30.33
30,33 € tax excl.
Kit includes:
Perforated and anodized aluminum rail reach 40 kg length 190 cm
Sliding carriage (2 pieces)
Door anchor bracket (2 pieces)
Carriage support Screw (2 pieces)
Lower guide (1 pieces)
Holding brake...
€25.41
25,41 € tax excl.
PVC rail 2,5 meters for sliding picture holder "museo", white finish.
Measures looks image.
€61.48
61,48 € tax excl.
The kit includes:
- Perforated aluminum track (1 pieces)
- Holding brake (1 pieces)
- Opening mechanism (1 pieces)
- Upper/lower bracket (2 pieces)
- Bracket housing (1 pieces)
- Opening mechanism housing (1...
€13.85
13,85 € tax excl.
Wheel for underbed furniture also suitable for the linear movement of furnishing modules.
Features:
With locking knob
Wheel diameter 60 mm
Load capacity 60 kg
Silver Painted Color/Finish
Apply on the internal...
€15.57
15,57 € tax excl.
Upper aluminum track for Koblenz System 1010 sliding system for single leaf capacity 40 Kg
€36.58
36,58 € tax excl.
System Caimi Export 9400 1
- 3 m track made of anodized extruded aluminium.
- Rail fixing system by means of quick coupling, without visible screws.
- Adaptable to any thickness.
- Provides standard 32 mm holes,...
€55.13
55,13 € tax excl.
Rail + beam in aluminum 2 mt. with ovals cut for distance from the wall mm.12 for sliding wooden doors.
Material: Anodised aluminum
Finishing: Brushed silver anodized
€96.25
96,25 € tax excl.
Anodized aluminium rail Mt 3, capacity 250 kg for KIT 0850/3.
€6.15
6,15 € tax excl.
Nylon wheel Ø 20 mm flat type
Specifications:
- Diameter 20 mm
- Thickness 6 mm
- Hole Ø 6 mm
Customers who bought this product also bought:
€0.82
0,82 € tax excl.
Strew honey dispenser made of beech wood, suitable to match to smaller jars and favors honey.
ASK HERE FOR YOUR CUSTOMIZATION !
Available in 2 sizes:
8 cm Small
11,5 cm Large
€25.41
25,41 € tax excl.
Track drilled and anodized aluminum for sliding door system Koblenz, length 2 Mt capacity 40 Kg
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form