€53.28
53,28 € tax excl.
Horizontal holder for mitre saw, keeps the piece in optimal position.
For LH1040 - LS1440 models.
Ruler Assembly 122707-9 parallel stop guide for mitre saw Makita LH1040F
Reference:
122707-9
Parallel stop guide 122707-9 for mitre saw. For making precise, straight cuts.
Suitable for LH1040F model.
€21.00
21,00 € tax excl.
Add to wishlist
You may also like
€13.89
13,89 € tax excl.
Vertical holder for mitre saw, keeps the piece in optimal position.
For LH1040 models.
€477.35
477,35 € tax excl.
Characteristics: Height adjustable upper shelf (up to 40 mm) Work area lighting Sturdy aluminum structure - Lightweight and compact Electronics: constant speed - slow startTechnical data: Power absorbed...
other products in the same category:
€14.34
14,34 € tax excl.
Replacement blade chain for Makita or Dolmar chainsaw Chain bar length 15"/38 cm, Number of links 64, Chain pitch 325", 1.5 mm chain
€42.62
42,62 € tax excl.
Tool basket with tool pouches. Adjustable shoulder strap and robust metal handle. Swing down front and rear walls to keep a 90° opening.
-30%
€4.05
€5.79
4,05 € tax excl.
Nemesis2 drill bit with 4 cutting edges with SDS-PLUS attachment for rotary hammer. Application on concrete, ceramics, tiles, walls, red bricks, granite, roofing tiles, and reinforced concrete.
Asymmetric faces of...
€31.97
31,97 € tax excl.
DIAMOND - COOL WATER - NO PERCUSSION for fast, smooth cutting in all grades of hard and soft tiles.
Drilling with water increases the lifespan of the tool. Do not press strongly on the tool, let it work. Make a...
€24.00
24,00 € tax excl.
Replacement planer blade for the HK 82 RF rustic planing head in the fine version. This creates a wavy planing result. It resembles very weathered wood, especially if the surface is brushed after planing. The result...
€1.13
1,13 € tax excl.
Top quality ultra-thin cutting disc, applications on mild steel, sheet metal, tubes and aluminum profiles.
Diameter: 125 mm
Hole: 22.23 mm
Blade thickness: 1,6 mm
€4.84
4,84 € tax excl.
Continuous crown diamond blade for dry and wet cutting of marble and tiles. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 115 mm
Hole: 22.2 mm
Blade thickness: 2 mm
€0.82
0,82 € tax excl.
Top quality ultra-thin cutting disc, applications on mild steel, stainless steel, sheet metal, tubes.Diameter: 115 mmHole: 22.23 mmBlade thickness: 1 mm
€16.39
16,39 € tax excl.
Chain bar length 15.5 cm, number of links 32, chain pitch 1/4", chain thickness 0.6 mm.
Suitable for M-MS18 Pruning Saw.
€33.20
33,20 € tax excl.
Wood blade for miter saw and circular saw 255 x 30 x 60z thickness 1,8 / 2,3 original Makita
Suitable for all rotary saws.
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 8mm diameter
L - Length 25mm
d - Hole Ø 6 mm
€8.61
8,61 € tax excl.
Wood roughener disc for steel thickness 0,5 mm, Ø 115.
New
€12.30
12,30 € tax excl.
The Impact Black range is designed for use with impact wrench drivers. The bits are made with maximum precision from S2 steel with additional heat treatment, providing greater durability and resistance compared to...
Out-of-StockSold out
€154.92
154,92 € tax excl.
CTCFE620 Snap-On Battery Charger 18V DC, Lithium, Slide-on style
€6.48
6,48 € tax excl.
SDS-PLUS shank chisel, length 200 mm, width 20 mm.
P-25074 Makita for demolition hammer and chipper.
€261.48
261,48 € tax excl.
Tool trolley made entirely of HDPE polyethylene, a real shield against accidental shocks. High capacity case ideal for air travelling engineers that carry both tools, spare parts and components.The TSA Locks allow the...
€318.85
318,85 € tax excl.
Tool trolley made entirely of HDPE polyethylene, a shield against accidental shocks. Special extra thick aluminium trim for tight closure. High capacity case ideal for air travelling engineers that carry both tools,...
€44.30
44,30 € tax excl.
Replacement complete base support for Makita 3708 and 3708FC (3707,3707F,3707FC) trimmers
€24.18
24,18 € tax excl.
Chain bar length 24"/60cm, number of links 84, chain pitch 3/8", 1.5mm chain
€467.21
467,21 € tax excl.
Professional kit DLX2180TJ1 consisting of DHP484 impact drill driver, DTD153 impact drill driver, 3 BL1850B batteries, 1 DC18RD battery charger and Makpac case.Makita DHP484 percussion drill driver Voltage 18 V...
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 12mm diameter
L - Length 25mm
d - Hole Ø 8 mm
€208.37
208,37 € tax excl.
Snap-On CTB8187 battery 18V slide on 5.0 Ah high-capacity lithium battery (90 Wh)
€12.90
12,90 € tax excl.
Nail pouch in special reinforced tough material. Impenetrable double layer hard-wearing fabric. Special shape helps prevent holes. Large capacity. Fits belt Model 530TB.
Features:
Item size (WidthxDepthxHeight)...
€25.33
25,33 € tax excl.
Segmented diamond blade B-54003 for SG150 wall chaser
Applications: For abrasives, suitable for concrete, reinforced concrete, granite, perforated, brick.
Hole: 22.23mm
Diameter: 150 mm
€12.21
12,21 € tax excl.
Set of 3 metal dust filters for grinders.
195446-4 Makita suitable for models 9564P / PCV - 9565PCV - 9566CV- GD0801C - GD0811C
€7.55
7,55 € tax excl.
Pack of 100 universal nylon anchors for both compact and empty materials
€13.50
13,50 € tax excl.
The splinter guard, mounted in place of the scoring cut, allows tear-free cuts to the right of the blade. When the machine is in operation, the inserted splinter guard is scored and thus precisely adapted to the...
€9.75
9,75 € tax excl.
Excellent for cutting hard and fragile materials such as glass and ceramics - Also suitable for concrete and masonry - Carbide tip - 3-sided tang.
Measures Ø 5-6-8-10-12 mm
Length 85-123 mm
€61.99
61,99 € tax excl.
Makita quick electric charger
Voltage: 7.2V up to 10.8V
To charge Li-ion batteries with 7.2 V and 10.8 V. An indicator lamp provides information on the battery charge level, the availability of the quick charger...
€29.10
29,10 € tax excl.
Rubber backing pad 115x229 mm for random orbit sander.
162172-0 Makita, for tools 9046
€15.98
15,98 € tax excl.
Saw chain length 115 mm, chain step 1/4 inch, groove 1.3 mm, 42 traction meshes.
P-19928 Makita.
€27.79
27,79 € tax excl.
Staples in stainless steel for molluscs, mussels, mussels, clams, cockles, lupins and agricultural products.
Features:
Length: 8 mm
Crown width: 16 mm
Wire diameter: 1.3 mm
Finishing: stainless steel...
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Italiano
Français
Deutsch
Español