€3.69
3,69 € tax excl.
Adjustable grinder wrench with soft grip.
Max adjustable width 54 mm
Length 200 mm
Filter By
Filter By
Tools accessories
€7.79
7,79 € tax excl.
Magnetic bit holder - Suitable for bits and bit holders - Reversible. With 1/4 "hex socket
€18.03
18,03 € tax excl.
Length/width: 1065/4.8 mm
Thickness: 0.40 mm
Teeth per inch: 15
Suitable as a replacement for SN206 band saws.
€18.03
18,03 € tax excl.
Length/width: 1085/4.4 mm
Thickness: 0.35 mm
Teeth per inch: 15
Suitable as a replacement for SN306 band saws.
€27.87
27,87 € tax excl.
Length/width: 1140/12,2 mm
Thickness: 0.65 mm
Teeth per inch: 14
Suitable as a replacement for TN85/86 band saws.
€31.15
31,15 € tax excl.
Length/width: 1302/12,2 mm
Thickness: 0.65 mm
Teeth per inch: 14
Suitable as a replacement for TN100 band saws.
€21.31
21,31 € tax excl.
Length/width: 1400/6.3 mm
Thickness: 0.35 mm
Teeth per inch: 6
Suitable as a replacement for SN208B, SN209 band saws.
€14.75
14,75 € tax excl.
Length/width: 1400/6.3 mm
Thickness: 0.65 mm
Teeth per inch: 6
Suitable as a replacement for SN208C, SN209 band saws.
€14.75
14,75 € tax excl.
Length/width: 1425/6 mm
Thickness: 0.65 mm
Teeth per inch: 6
Suitable as a replacement for SN150/208/250/308 band saws.
€20.49
20,49 € tax excl.
Length/width: 1505/6.4 mm
Thickness: 0.40 mm
Teeth per inch: 10
Suitable as a replacement for SN209/9 band saws.
€14.75
14,75 € tax excl.
Length/width: 1630/6 mm
Thickness: 0.50 mm
Teeth per inch: 6
Suitable as a replacement for SN210 band saws.
€35.25
35,25 € tax excl.
Length/width: 1638/12,2 mm
Thickness: 0.65 mm
Teeth per inch: 14
Suitable as a replacement for TN115 band saws.
€20.49
20,49 € tax excl.
Length/width: 1712/10 mm
Thickness: 0.65 mm
Teeth per inch: 6
Suitable as a replacement for SN210P band saws.
€22.95
22,95 € tax excl.
Length/width: 2264/12,6 mm
Thickness: 0.65 mm
Teeth per inch: 4
Suitable as a replacement for SN212P band saws.
€26.15
26,15 € tax excl.
Battery Charger 18V ONEALL 2,4 A for a wide range of cordless tools with high performance lithium cells - BMS (Battery Management System) technology for intelligent battery management - Optimized charging and...
€4.84
4,84 € tax excl.
Continuous crown diamond blade for dry and wet cutting of marble and tiles. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 115 mm
Hole: 22.2 mm
Blade thickness: 2 mm
€15.16
15,16 € tax excl.
Continuous crown diamond blade for dry and wet cutting of marble and tiles. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 230 mm
Hole: 22.2 mm
Blade thickness: 2.6 mm
€6.72
6,72 € tax excl.
Diamond blade for dry cutting of concrete, stoneware, tiles. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 115 mm
Hole: 22.2 mm
Blade thickness: 2 mm
€10.57
10,57 € tax excl.
Diamond blade for dry cutting of concrete, stoneware, tiles. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 115 mm
Hole: 22.2 mm
Blade thickness: 2 mm
€26.15
26,15 € tax excl.
Diamond blade for dry cutting of concrete, stoneware, tiles. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 230 mm
Hole: 22.2 mm
Blade thickness: 2,5 mm
€19.59
19,59 € tax excl.
Diamond blade for dry cutting of concrete, stoneware, tiles. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 230 mm
Hole: 22.2 mm
Blade thickness: 3 mm
€49.10
49,10 € tax excl.
Drain cleaner for pressure washers 1520126, 1520127 and 1520128 with adapter 1520123
€27.79
27,79 € tax excl.
Drain cleaner for pressure washers 1520126, 1520127 and 1520128 with adapter 1520123
€4.60
4,60 € tax excl.
Body in plastic material - For bits from 4 to 10 mm.
€40.98
40,98 € tax excl.
Features:
For drilling flat surfaces, round work pieces and battens with precision
Product dimensions (W x D x H) 160x230x500 mm
Depth 112 mm
Milled worktop with clamping grooves for fastening clamping blocks...
€31.07
31,07 € tax excl.
Includes:
Quick charger 1,7A
1 battery 2 Ah
€5.74
5,74 € tax excl.
For wood and plastic materials.
Width 34 mm
Useful length 40 mm
Suitable for MULTIJOB Valex, Bosch and compatible.
€67.95
67,95 € tax excl.
180 ° swivel rod - Painted steel structure.
Capacity kg / cm: 300/110 - 600/75
Net weight: 8.5 kg
€13.00
13,00 € tax excl.
Self-locking drill chuck with SDS-PLUS connection.
Minimum opening 2 - max 13 mm
1/2" threaded connection - SDS-PLUS
€12.70
12,70 € tax excl.
Reversible keyless chuck with angle connector for screwdriver or drill minimum opening 1,5 mm maximum 10,0 mm - shank connection 9 mm
€14.75
14,75 € tax excl.
Set 2 bi-metal jig saw blades 100 mm DOWN CUT, 10TPI, ideal for woodworking and metal cutting.
€2.62
2,62 € tax excl.
Quick release magnetic bit holder with 25 mm long 1/4" shank, total length 60 mm.
€13.52
13,52 € tax excl.
Flexible spiral cable in galvanized steel - Crank for manual use and hexagonal attachment for use with drills and screwdrivers - Ergonomic handle - Ideal for unclogging bathroom and kitchen drains.
Cable length 7.5...
€9.02
9,02 € tax excl.
Ideal as a support for LED, halogen, low consumption and heating headlights.
€3.11
3,11 € tax excl.
HSS hand iron hacksaw blade
blade length - 300 mm
teeth / thumb - 24
€38.93
38,93 € tax excl.
Battery 2.0 Ah 18V ONEALL for a wide range of cordless tools - High performance lithium cells - BMS (Battery Management System) technology for intelligent battery management - Optimized charging and discharging for...
€40.90
40,90 € tax excl.
Battery 3.0 Ah 18V ONEALL for a wide range of cordless tools - High performance lithium cells - BMS (Battery Management System) technology for intelligent battery management - Optimized charging and discharging for...
€73.69
73,69 € tax excl.
Battery 5.0 Ah 18V ONEALL for a wide range of cordless tools - High performance lithium cells - BMS (Battery Management System) technology for intelligent battery management - Optimized charging and discharging for...
€8.20
8,20 € tax excl.
For wood and plastic materials.Width 32 mmUseful length 40 mmSuitable for MULTIJOB Valex, Bosch and compatible.
€6.15
6,15 € tax excl.
Rubber pad with tear-off support, thread M14x48 mm, Ø 180 mm for sander-polisher.
For grinders / polishers: Valex SL1000 / 1125/1200/1201
€18.85
18,85 € tax excl.
Replacement saw blade chain, Chain bar length 10"/25 cm, Number of chain teeth 39, Chain pitch 3/8", 1.3 mm chain.
The 91PX is ideal for home maintenance and occasional use, for users who want a low vibration and low...
€21.23
21,23 € tax excl.
Replacement saw blade chain, Chain bar length 12"/30 cm, Number of chain teeth 45, Chain pitch 3/8", 1.3 mm chain.
The 91PX is ideal for home maintenance and occasional use, for users who want a low vibration and low...
€26.15
26,15 € tax excl.
Replacement saw blade chain, Chain bar length 14"/35 cm, Number of chain teeth 52, Chain pitch 3/8", 1.3 mm chain.
The 91PX is ideal for home maintenance and occasional use, for users who want a low vibration and low...
€25.41
25,41 € tax excl.
Replacement saw blade chain, Chain bar length 14"/35 cm, Number of chain teeth 53, Chain pitch 3/8", 1.3 mm chain.
The 91PX is ideal for home maintenance and occasional use, for users who want a low vibration and low...
€16.80
16,80 € tax excl.
Replacement saw blade chain, Chain bar length 8"/20 cm, Number of chain teeth 33, Chain pitch 3/8", 1.1 mm chain.
The 90PX(replaces the 90SG) is a chain with exceptional performance, ideal for small and low power...
€36.80
36,80 € tax excl.
Replacement saw blade chain, Chain bar length 18"/45 cm, Number of chain teeth 72, Chain pitch 325", 1.5 mm chain.
It requires little maintenance and stays sharp so you can get the job done quickly and easily....
€6.97
6,97 € tax excl.
Segmented crown diamond blade for dry cutting of concrete and bricks. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 115 mm
Hole: 22.2 mm
Blade thickness: 2 mm
€19.26
19,26 € tax excl.
Segmented crown diamond blade for dry cutting of concrete and bricks. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 230 mm
Hole: 22.2 mm
Blade thickness: 2.5 mm
€18.77
18,77 € tax excl.
Features:
Compatible with commercially available power drills (at least 600 W)
It is perfect for draining water beds or a water butt
The pump is not suitable for pumping poisonous, caustic and/or flammable...
€6.39
6,39 € tax excl.
For electric planer model: PE 1480/1500/1550/1600/1800/1810/2000.
Dimensions:
Length 82 mm
€5.74
5,74 € tax excl.
Length 133 mm
Teeth per inch 18
Suitable as a replacement for scroll saw with oscillating blade SV4000 - SV4000E - SV4001EB - SV4002EB.
€14.92
14,92 € tax excl.
Resharpenable steel blade - Ergonomic wooden handle.
Tip shape: Round 15 mm, Convex 10 mm, Slanted cut 14 mm and Angled 14, 15 mm.
Blade width 14 mm
Total length 360 mm
€9.75
9,75 € tax excl.
Excellent for cutting hard and fragile materials such as glass and ceramics - Also suitable for concrete and masonry - Carbide tip - 3-sided tang.
Measures Ø 5-6-8-10-12 mm
Length 85-123 mm
€8.20
8,20 € tax excl.
Round Ø14mm, oval Ø14mm, 2 conical Ø14mm, cylindrical Ø14mm - 6mm tang.
€3.28
3,28 € tax excl.
Set consisting of round Ø24mm, semi-round Ø14mm, cylindrical Ø25mm, conical Ø26mm, conical Ø19mm grinding wheel - 6mm shank.
€16.31
16,31 € tax excl.
To sharpen the cutting edges of the chains - A flat file with graduated template to adjust the depth limiting tooth - Graduated steel file holder - Interchangeable wooden handle.
File length 200 mm
4 round files...
€12.21
12,21 € tax excl.
Maximum operating pressure 10 bar. Ø internal/external: 6/8 mm
Dimensions: Length 15 meters
€16.31
16,31 € tax excl.
Maximum operating pressure 10 bar. Ø internal/external: 6/8 mm
Dimensions: Length 15 meters
€9.83
9,83 € tax excl.
Measure from 4-32mm. 3-surface shank diameter 10mm Suitable for expanding holes in sheet steel, aluminum, copper, plastic and composite materials
€9.02
9,02 € tax excl.
For wood, plastic materials, sheet metal (max 2mm), bricks and joints.
Width 32 mm
Useful length 40 mm
Suitable for MULTIJOB Valex, Bosch and compatible.
€13.00
13,00 € tax excl.
2 pieces of synthetic cloth cap for polisher and grinder measuring 180 mm, hook and loop fastening
€10.80
10,80 € tax excl.
2 pieces of synthetic wool cap for polisher size 240mm, fixing with twine
€4.84
4,84 € tax excl.
For petrol and electric brushcutters - Connection hole Ø 25mm - Cutting diameter 255 mm
€31.07
31,07 € tax excl.
Adjustable Ball bearing roller support, supports large pieces up to 80 kg.
Three support modes: roller, ball or smooth surface.
Adjustable height min-max: 69 - 112 cmRoller width: 28 cmNet weight: 5.4 kg
€24.51
24,51 € tax excl.
Adjustable roller support, supports large pieces up to 80 kg.
Adjustable height min-max: 69 - 109 cmRoller width: 28 cmNet weight: 4.4 kg
€23.77
23,77 € tax excl.
Adapter allows you to transform an SDS-MAX attachment into an SDS-PLUS quickly, quickly and use tips with different attachments.
Length: 21mm
Width: 33 mm
Height: 16mm
€172.13
172,13 € tax excl.
For wood lathes - Spindle external diameter 125mm - Supplied with adapter with double threaded connection.
Opening 85-145 mm
Connection M25x3 / M18x2.5
€63.93
63,93 € tax excl.
For wood lathes - Spindle external diameter 125mm - Supplied with adapter with double threaded connection.
Opening 85-145 mm
Connection M25x3 / M18x2.5
€12.87
12,87 € tax excl.
Sharpener, attachment for drills with collar from 43 mmv, for drill bits from 3.6 to 10 mm
FEATURES
Drill attachment with key spindle and 43mm collar
For tips from 3.6 to 10mm
Equipped with spare wheel
€27.46
27,46 € tax excl.
For petrol augers: AUGER 50/52 - Connectable to petrol augers with Ø 20 mm crankshaft - Tip with hardened steel plate.
Diameter: Ø 10 cmLength: 56 cm
€34.02
34,02 € tax excl.
For petrol augers: AUGER 50/52 - Connectable to petrol augers with Ø 20 mm crankshaft - Tip with hardened steel plate.
Diameter: Ø 15 cmLength: 56 cm
€27.79
27,79 € tax excl.
For petrol augers: AUGER 50/52 - Connectable to petrol augers with Ø 20 mm crankshaft - Tip with hardened steel plate.
Diameter: Ø 20 cmLength: 56 cm
€27.87
27,87 € tax excl.
Length/width: 1573/6 mm
Thickness: 0.35 mm
Teeth per inch: 6
Suitable as a replacement for SN209B band saws.
€8.11
8,11 € tax excl.
For petrol augers: AUGER 50/52 - Connectable to petrol augers with Ø 20 mm crankshaft.
Diameter: Ø 2,5 cmLength: 40 cm
Out-of-StockSold out
€13.03
13,03 € tax excl.
The Lenox coolant and lubricant PROTOOL LUBE shortens cutting time by up to 50 %, reduces heat and friction in wood, metal, and plastic.
Showing 1-75 of 75 item(s)
Italiano
Français
Deutsch
Español