Click for more products.
No produts were found.
0
Valex Tip Ø 10 cm for petrol auger

Valex Tip Ø 10 cm for petrol auger

Reference:
VALEX-1497663

For petrol augers: AUGER 50/52 - Connectable to petrol augers with Ø 20 mm crankshaft - Tip with hardened steel plate.

Diameter: Ø 10 cm
Length: 56 cm

€27.46
27,46 € tax excl.
Available in stock 1 Item
Ask a question (0)
 Calculate Shipping Cost
Add to wishlist
Valex
Product Details
VALEX-1497663
Made IN
Italy
GPSR
Manufacturer
Valex
Valex
0445515411
Via Lago Maggiore, 24
36015 Schio
Italy
valex@valex.it
You may also like
Valex Tip Ø 20 cm for petrol auger Valex Tip Ø 20 cm for petrol auger

€39.26
39,26 € tax excl.
Connectable to petrol-powered augers with a crankshaft Ø 20 mm - Tip with a hardened steel plate. Diameter Ø 20 cm Length 80 cm Suitable for petrol-powered auger AUGER 50/52.
Valex Tip Ø 20 cm for petrol auger Valex Tip Ø 20 cm for petrol auger

€36.07
36,07 € tax excl.
For petrol augers: AUGER 50/52 - Connectable to petrol augers with Ø 20 mm crankshaft - Tip with hardened steel plate. Diameter: Ø 20 cmLength: 56 cm
Valex Tip Ø 15 cm for petrol auger Valex Tip Ø 15 cm for petrol auger

€34.02
34,02 € tax excl.
For petrol augers: AUGER 50/52 - Connectable to petrol augers with Ø 20 mm crankshaft - Tip with hardened steel plate. Diameter: Ø 15 cmLength: 56 cm
Valex catalyzed Engine-Reducer for Auger 2 Stroke 52S Valex catalyzed Engine-Reducer for Auger 2 Stroke 52S

€204.51
204,51 € tax excl.
Safety clutch - Anti-shock system absorbs energy in the event of tip locking - Anti-vibration system - Transmission with straight-toothed gears - Die-cast aluminum reduction box - Manual fuel pump - Soft handle....
other products in the same category:
Einhell BT-US 400 Set 3 belts 60/80/120

€12.30
12,30 € tax excl.
Set of 3 tapes 60/80/120 BT-US 400 Einhell Technical Data: - Abrasive belt - 1 piece grain 60 - 1 piece grain 80 - 1 piece 120 grit - Weight 380 grams
Professional polyester tool holder Plano 533TB

€19.50
19,50 € tax excl.
Tool holder in special reinforced hard-wearing material. Handy tiered pockets. Strong hammer loop. Fits belt Model 530TB. Features: Item size (WidthxDepthxHeight) 35.5x6x28 cm Weight 0.3 Kg Measures looks image.
Bimetal blade for Multi-Tool Valex

€9.02
9,02 € tax excl.
For wood, plastic materials, sheet metal (max 2mm), bricks and joints. Width 32 mm Useful length 40 mm Suitable for MULTIJOB Valex, Bosch and compatible.
Couple knee Makita E-05658 rigid slip

€40.98
40,98 € tax excl.
Length 170 mm, height 240 mm, width 95 mm. Ideal for concrete work, solid wood floors and construction work. High density foam padding with durable hood to provide added comfort. Flexible straps keep the knee pads in...
Makita E-15285 bag for hammer and tool holder for belt

€17.21
17,21 € tax excl.
- Length 185 mm, height 205 mm, width 85 mm. - Two polyester supports on the sides, five convenient elastic loops on the front for easy storage. - 3 fixing methods. - Fully rotatable for easy access in any working...
Hammer and tool holder Makita E-15291 tool holder for belt

€10.25
10,25 € tax excl.
The hammer holder and tool holder E-15291 is a stainless steel side hammer holder, compatible with any hammer, with 2 additional elastic rings, ideal for pencil and screwdriver, easily accessible and at the same time,...
Diamond blade B-48577 Ø 125 mm, segment 5.5 mm Makita

€68.85
68,85 € tax excl.
Diamond blade Ø 125 mm for dry use with double row, bore diameter (shaft diameter) Ø 22.23 mm, segment height 5.5 mm, no-load speed 12,200 min⁻¹. Suitable for roughing concrete, cement, and bricks with a wall...
Straight blade for Multi-Tool Valex

€9.02
9,02 € tax excl.
For wood, plastic materials, sheet metal (max 2mm), bricks and joints. Width 32 mm Useful length 40 mm Suitable for MULTIJOB Valex, Bosch and compatible.
Wire Cup Brush D-24094 Ø 75 mm Makita

€4.50
4,50 € tax excl.
Wire Cup Brush Ø 75 mm with M14 threaded attachment, wire diameter 0.3 mm in steel, no-load speed 12500 min⁻¹. Suitable for deburring, mattifying, roughening, cleaning, and removing rust, recommended for rough or...
Diamond blade 230 mm D-41654 Makita

€21.60
21,60 € tax excl.
Diamond blades with continuous rim dry use, application of concrete, bricks and other building materials. Diameter: 230 mm Hole: 22.23 mm Blade width: 3.1 mm
1-11-908 Stanley Utility blade 1991, pack 100 pcs.
Out-of-StockSold out

€24.59
24,59 € tax excl.
Fits all standard STANLEY utility knives and most other knives. Suitable for cutting most light sheet materials, paper and cardboard. Dimensions: Width 0,5 mm Thickness 0,45 mm Length 50 mm Height 19 mm
Set 30 bit E-15774 for screwing Makita

€29.51
29,51 € tax excl.
Practical screwing kit consisting of 30 bits in a plastic case. The colored band allows easy identification of the bit type, the transparent lid shows the contents, and detachable and rotatable compartments make it...
Step stool with 3 folding steps in natural beech wood

€27.05
27,05 € tax excl.
3-step folding ladder in solid natural beech, you can also use it as a comfortable stool, minimum overall dimensions, stable and easy to use. Features: - In natural solid beech - Anti-slip milling - Max...
Twin pair of blades for stainless steel 115 mm

€41.80
41,80 € tax excl.
Twin 115 mm replacement blades for Stainless Steel for STRIKE double-counter rotating blades. Cutting stability, without burrs No Gyroscope effect (more security) Total or partial cancellation of the forces that...
Irwin TURBOMAX HSS multifunction drill bits metal drilling

€3.26
3,26 € tax excl.
TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...
Questions (0)

No customer questions for the moment.


Ask a question
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Captcha

Settings

Click for more products.
No produts were found.

Menu

Please sign in first.

Sign in

Create a free account to use wishlists.

Sign in