€72.95
72,95 € tax excl.
Cast iron swivel table vise with jaws attached.
Opening mm 150
Jaws mm 150
Depth mm 70
Net weight kg 11.3
Filter By
Filter By
Products
Filter By
€1.56
1,56 € tax excl.
Joint for the series connection of two pipes with automatic fittings installed at the ends.
€8.20
8,20 € tax excl.
Bit holder with 1/4" drive, Bit holder adapter 1 F/F 6.3 mm-1/4", 9 hexagon sockets from 5 to 13 mm, 5 bits for slotted screws, 3 phillips and 3 pozidriv.
€22.54
22,54 € tax excl.
With 3 tips: hot wire, hot knife, engraving - With support and spare wire - Soft handle.
€376.23
376,23 € tax excl.
AVR system: automatic regulation of the output voltage - Automatic shutdown for overloads and low oil level - Voltmeter.
Power KVA max 2.3
Engine 6.5 Hp
Displacement 212 cc
Voltage 230V
Single-phase synchronous...
€901.64
901,64 € tax excl.
AVR system: automatic regulation of the output voltage - Automatic shutdown for overloads and low oil level - Voltmeter.
Power KVA max 5.5
Engine 13 Hp
Displacement 389 cc
Voltage 230V
Single-phase synchronous...
€983.61
983,61 € tax excl.
AVR system: automatic regulation of the output voltage - Automatic shutdown for overloads and low oil level - Voltmeter.
Power KVA max 5.5
Engine 13 Hp
Displacement 389 cc
Voltage 230V
Single-phase synchronous...
€11.07
11,07 € tax excl.
Fireproof Adapter with 16 A plug and industrial socket. IP20.
€11.07
11,07 € tax excl.
Fireproof Adapter with industrial plug and universal socket. IP20.
€11.39
11,39 € tax excl.
Valex adjustable metal mesh visor, adjustable from the rear. to EN1731 standards
€11.89
11,89 € tax excl.
Chrome vanadium steel body - Jaws finish: glossy - Soft grip.
Dimensions: Length 300 mm, max opening 50 mm
€6.48
6,48 € tax excl.
Adjustable metal broom with galvanized steel Valex handle, Adjustable width 180-630 mm
€7.20
7,20 € tax excl.
Steel body - Finishing of the jaws: glossy - Ergonomic handle.
Length 240 mm
Maximum aperture 35 mm
Net weight 344 gr
€5.66
5,66 € tax excl.
Adjustable self-locking grip pliers with shaped jaws and push release. Steel body - Finish: nickel plated.
Length 250 mm
Maximum opening 42 mm
€6.15
6,15 € tax excl.
Adjustable self-locking grip pliers with shaped jaws and pull release. Steel body - Finish: nickel plated.
Length 250 mm
Maximum opening 42 mm
€3.69
3,69 € tax excl.
Adjustable grinder wrench with soft grip.
Max adjustable width 54 mm
Length 200 mm
€17.13
17,13 € tax excl.
Airbrush with Valex drop tank equipped with bayonet quick coupling
TECHNICAL DATA
Pressure bar: 3
Air consumption l / min: 150
Tank l: 0.6
Type of attack: Bayonet and rapid
Ø hole nozzle mm: 1,5
€17.95
17,95 € tax excl.
Non-slip handle - Pressure gauge up to 11 bar - Height 65 cm - Tube diameter 3.8 cm - Double inflation connection - Supplied with adapters for inflating balls and mats.
€7.79
7,79 € tax excl.
Aluminum body, bayonet connection. Standard nozzle and 110 mm long nozzle.
€64.67
64,67 € tax excl.
Platform measures 255x270 mm with safety hooks against accidental closure - Non-slip steps in extruded aluminum 80 mm wide - Non-slip feet - Compliance with EN 131 standards - Capacity 150 kg - Upright section 40x20...
€89.34
89,34 € tax excl.
Disc lock button - Progressive start - Safety switch against accidental switching on - Adjustable disc protection - 180° rotating soft handle - Front handle fixable in 3 positions.
Power 2000W
No-load speed 6500 rpm...
€110.57
110,57 € tax excl.
Disc lock button - Progressive start - Safety switch against accidental switching on - Adjustable disc protection without tools - 180° rotating soft handle - Front handle fixable in 3 positions.
Voltage 18 V
No-load...
€7.79
7,79 € tax excl.
Magnetic bit holder - Suitable for bits and bit holders - Reversible. With 1/4 "hex socket
€7.79
7,79 € tax excl.
Coated steel stranded cable - Supplied with 2 keys.
Cable length 1000 mm
Cable diameter 18 mm
€28.65
28,65 € tax excl.
For vacuuming ashes from stoves, fireplaces and barbecues - Flexible hose with aluminum nozzle - Washable HEPA cartridge filter with metal filter - Carrying handle - With blowing function - Net weight 2.4 Kg.
Power...
€55.33
55,33 € tax excl.
To vacuum hot ashes up to 40° from stoves, fireplaces and barbecues - Flexible hose with aluminum nozzle - Self-extinguishing HEPA cartridge filter with double internal/external metal filter - Fireproof pre-filter -...
€35.98
35,98 € tax excl.
Auto CU battery connection cables
Copper cables with insulated pliers. Cable section 25 mm², cable length 2.5 m.
€9.00
9,00 € tax excl.
Contains one piece per size: 1,5-2-2,5-3-4-5-6-8-10mm - Length 90-220mm - Chrome vanadium steel body - Burnished finish - Plastic support.
€18.03
18,03 € tax excl.
Length/width: 1065/4.8 mm
Thickness: 0.40 mm
Teeth per inch: 15
Suitable as a replacement for SN206 band saws.
€18.03
18,03 € tax excl.
Length/width: 1085/4.4 mm
Thickness: 0.35 mm
Teeth per inch: 15
Suitable as a replacement for SN306 band saws.
€27.87
27,87 € tax excl.
Length/width: 1140/12,2 mm
Thickness: 0.65 mm
Teeth per inch: 14
Suitable as a replacement for TN85/86 band saws.
€31.15
31,15 € tax excl.
Length/width: 1302/12,2 mm
Thickness: 0.65 mm
Teeth per inch: 14
Suitable as a replacement for TN100 band saws.
€21.31
21,31 € tax excl.
Length/width: 1400/6.3 mm
Thickness: 0.35 mm
Teeth per inch: 6
Suitable as a replacement for SN208B, SN209 band saws.
€14.75
14,75 € tax excl.
Length/width: 1400/6.3 mm
Thickness: 0.65 mm
Teeth per inch: 6
Suitable as a replacement for SN208C, SN209 band saws.
€14.75
14,75 € tax excl.
Length/width: 1425/6 mm
Thickness: 0.65 mm
Teeth per inch: 6
Suitable as a replacement for SN150/208/250/308 band saws.
€20.49
20,49 € tax excl.
Length/width: 1505/6.4 mm
Thickness: 0.40 mm
Teeth per inch: 10
Suitable as a replacement for SN209/9 band saws.
€27.87
27,87 € tax excl.
Length/width: 1573/6 mm
Thickness: 0.35 mm
Teeth per inch: 6
Suitable as a replacement for SN209B band saws.
€14.75
14,75 € tax excl.
Length/width: 1630/6 mm
Thickness: 0.50 mm
Teeth per inch: 6
Suitable as a replacement for SN210 band saws.
€35.25
35,25 € tax excl.
Length/width: 1638/12,2 mm
Thickness: 0.65 mm
Teeth per inch: 14
Suitable as a replacement for TN115 band saws.
€20.49
20,49 € tax excl.
Length/width: 1712/10 mm
Thickness: 0.65 mm
Teeth per inch: 6
Suitable as a replacement for SN210P band saws.
€22.95
22,95 € tax excl.
Length/width: 2264/12,6 mm
Thickness: 0.65 mm
Teeth per inch: 4
Suitable as a replacement for SN212P band saws.
€49.10
49,10 € tax excl.
Foldable tank with support structure - With tap and quick connection to connect the irrigation hose - Ideal for rainwater recovery and garden irrigation.
Dimensions ØxH 600x920 mm
Capacity 250 Litres
€26.15
26,15 € tax excl.
Battery Charger 18V ONEALL 2,4 A for a wide range of cordless tools with high performance lithium cells - BMS (Battery Management System) technology for intelligent battery management - Optimized charging and...
€11.39
11,39 € tax excl.
Made of polypropylene - Dip length 385 mm - Works with 2 type D batteries not included.
€130.33
130,33 € tax excl.
Tilting belt device with workpiece guide - Simple belt change thanks to the clamping device. Power 350W - Revolutions per minute (belt) 286 - Manual belt alignment - Tilting belt plane 0 - 90°, Revolutions per minute...
€196.64
196,64 € tax excl.
To cut wood and derivatives, plastic and foam materials - Possibility of making straight, transverse and inclined cuts.
Technical data :
- power 2000W - rpm at no load 4,800 - blade dimens. / teeth Ø250xø30mm /...
€1.64
1,64 € tax excl.
Anti-perspiration wooden handle - Stainless steel ferrule - MIXED bristle - Ideal for radiators, corners and profiles with dimensions 30x12x44 - 40x12x51 - 50x12x51 - 60x12x57 mm
€10.57
10,57 € tax excl.
Degree of protection IP55 - 300 Lumen - Power 1W - Natural light 4000K - Twilight and movement sensor - Sensor angle 120° - Rear courtesy light - 3 operating modes: mode A turns on the rear light in the dark, when...
€11.07
11,07 € tax excl.
3 universal sockets - 6 lateral 10 / 16A bypass sockets - Italian plug with 16A earth contact - safe: in fireproof material - cable length 1.5 m - cable section 3x1.5 mm² - With switch.
€5.33
5,33 € tax excl.
Bow saw with blade length 300 mm from 24 teeth / inch,
STEEL structure PLASTIC MATERIAL handle
€25.33
25,33 € tax excl.
Contains:
9 taps and dies ISO metric coarse thread sizes:
- M3x0.50-M4x0.70-M5x0.80-M6x1.00-M7x1.00-M8x1.25-M9x1.25-M10x1.50- M12x1.75
- 1 tap wrench
- 1 die holder
In chromium steel, for work on hard metal...
€9.43
9,43 € tax excl.
Waste collector with aluminum support, suitable for remote collection of hazardous material.
Technical data:
- Length 76 cm
- Plastic coated presile with gripping tips
- Opening 9 cm
- Small magnet at the tip...
€21.31
21,31 € tax excl.
Internal tray with compartments - 2 keys supplied.
Dimensions: 200x160x90 mm
€16.31
16,31 € tax excl.
Internal tray with compartments - 2 keys supplied.
Dimensions: 250x200x90 mm
€79.10
79,10 € tax excl.
Aluminum support plate - Safety switch against accidental ignition - Soft handle - Dust extraction arrangement.
Power 1400W
Idle rpm 4800
Blade size/teeth Ø190xø20mm/Z24
Teeth material hard metal
Max cut 90°: 68...
€4.92
4,92 € tax excl.
Head and tip in plastic material - Adjustable width of the irrigated sector from 0°-360° - Intermittent operation - Possibility of irrigation in series via front attachment.
Range 10 meters
€17.95
17,95 € tax excl.
Data memory - Character height 12 mm - Buzzer - Battery included. For measurements of DC voltage, AC voltage, AC current, resistance and continuity.
€4.10
4,10 € tax excl.
Soft-touch non-slip rubberized two-component handle - Fabric height: 18 mm - Continuous fiber fabric for quick and uniform coverage - Heat sealed to prevent fiber loss - Specific for rough surfaces and uneven walls....
€4.84
4,84 € tax excl.
Soft-touch non-slip rubberized two-component handle - Fabric height: 12 mm - Continuous fiber fabric for quick and uniform coverage - Heat sealed to prevent fiber loss - Specific for slightly rough surfaces. Ideal for...
€7.38
7,38 € tax excl.
Two-component, non-slip soft-touch rubberized handle - Fabric height: 12 mm - Solvent-resistant nylon fabric to guarantee excellent paint collection and uniform coverage - Specific for plasters and smooth walls. Ideal...
€1.56
1,56 € tax excl.
Joint for the series connection of two Ø 1/2"(12 mm) pipes.
€4.84
4,84 € tax excl.
Continuous crown diamond blade for dry and wet cutting of marble and tiles. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 115 mm
Hole: 22.2 mm
Blade thickness: 2 mm
€15.16
15,16 € tax excl.
Continuous crown diamond blade for dry and wet cutting of marble and tiles. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 230 mm
Hole: 22.2 mm
Blade thickness: 2.6 mm
€74.59
74,59 € tax excl.
Supplied without batteries and without charger.
Anti-drip controlled rack advancement - Maximum thrust 2000 N - For 280-310 ml silicone and 300 ml chemical cartridges - Soft handle - LED light.
€17.95
17,95 € tax excl.
Can be powered from the charging station or directly on the gun. Interchangeable nozzle.
Power 15(80)W
Glue stick Ø 12 mm
Extrusion 15 gr/min
Heating 5 minutes
Temperature 190°C
Net weight 0.440 Kg
€22.55
22,55 € tax excl.
175 mm blade in burnished and painted steel. Leather handle.
€22.06
22,06 € tax excl.
280 mm blade in burnished and painted steel. Leather handle.
€6.97
6,97 € tax excl.
Polished steel head - Flat round hammer and nail remover pen - Soft non-slip handle.
Head weight 500 gr
Head size lxhxp 125x50x30 mm
Total length 310 mm
€17.95
17,95 € tax excl.
Crimping pliers for pre-insulated terminals, wire cutter, screwdriver and wire stripper function
Length: 225mm
wires Ø min-max mm²: 0.75 - 6
FEATURES
• Suitable for pre-insulated cable lugs and closed...
€5.33
5,33 € tax excl.
Contains one piece per size: 1,5-2-2,5-3-4-5-6-8-10mm - Length 48-122mm - Chrome vanadium steel body - Burnished finish - Plastic support.
€1.90
1,90 € tax excl.
Phillips nano screwdriver with chrome vanadium steel blade - Burnished magnetic tip - Dimensions indicated on the head - Soft bi-material handle with thumb rest points for a safer grip.
Measures looks image.
€1.80
1,80 € tax excl.
Slotted nano screwdriver with chrome vanadium steel blade - Burnished magnetic tip - Dimensions indicated on the head - Soft bi-material handle with thumb rest points for a safer grip.
Measures looks image.
€1.90
1,90 € tax excl.
Phillips screwdriver with chrome vanadium steel blade - Burnished magnetic tip - Dimensions indicated on the head - Soft bi-material handle with thumb rest points for a safer grip.
Measures looks image.
€3.85
3,85 € tax excl.
Pozidriv Screwdriver with 4 integrated slots with chrome vanadium steel blade - Burnished magnetic tip - Dimensions indicated on the head - Soft bi-material handle with thumb rest points for a safer grip.
Measures...
€2.20
2,20 € tax excl.
Resistorx six-pointed star-shaped socket screwdriver with chrome vanadium steel blade - Burnished magnetic tip - Dimensions indicated on the head - Soft bi-material handle with thumb rest points for a safer grip....
€2.10
2,10 € tax excl.
Chrome vanadium steel blade - Burnished magnetic tip - Dimensions indicated on the head - Soft bi-material handle with thumb rest points for a safer grip.
Measures looks image.
€5.08
5,08 € tax excl.
Hardened steel blades - Steel handle with rubber coating - Safety strap. Total length 180 mm.
€7.30
7,30 € tax excl.
This cutter allows for unlimited positions thanks to the ratchet mechanism.
Recommended for use on heavy materials such as plasterboard, carpet, floors
Features:
- Ratchet mechanism
- Stainless steel blade...
€5.74
5,74 € tax excl.
Chrome vanadium steel body - Head finish: pearl-nickel plated - Soft bi-material handle.
length 110mm
useful beaks mm 13.0
net weight 70 g
€6.72
6,72 € tax excl.
Diamond blade for dry cutting of concrete, stoneware, tiles. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 115 mm
Hole: 22.2 mm
Blade thickness: 2 mm
€10.57
10,57 € tax excl.
Diamond blade for dry cutting of concrete, stoneware, tiles. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 115 mm
Hole: 22.2 mm
Blade thickness: 2 mm
€26.15
26,15 € tax excl.
Diamond blade for dry cutting of concrete, stoneware, tiles. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 230 mm
Hole: 22.2 mm
Blade thickness: 2,5 mm
€19.59
19,59 € tax excl.
Diamond blade for dry cutting of concrete, stoneware, tiles. For angle grinders - Maximum speed 80 m/s, 13300 rpm.
Diameter: 230 mm
Hole: 22.2 mm
Blade thickness: 3 mm
€49.10
49,10 € tax excl.
Drain cleaner for pressure washers 1520126, 1520127 and 1520128 with adapter 1520123
€27.79
27,79 € tax excl.
Drain cleaner for pressure washers 1520126, 1520127 and 1520128 with adapter 1520123
€7.38
7,38 € tax excl.
Manual piston pipe cleaner, sink cleaner, drain cleaner, etc
With 2 rubber adapters for shower-bidet-Wc-sink
- diameter 15cm
- diameter 6.3cm
€32.70
32,70 € tax excl.
Reversibility - Self-locking chuck - Transmission with steel gears - LED light.
Voltage 12 V
Charging time 3 - 5 hours
Mechanical speeds 1
No-load speed 0-650 rpm
Keyless chuck 10 mm
Clutch positions 16+1...
€4.60
4,60 € tax excl.
Body in plastic material - For bits from 4 to 10 mm.
€73.69
73,69 € tax excl.
Vacuum cleaner with 4 swivel wheels - 31 mm diameter accessory attachment - Accessory housing on the machine body - Blowing function.
Power 1200W
Air flow 29 l/s
Depression 190 (+/- 5%) mbar
Drum capacity 20...
Showing 1-90 of 396 item(s)
Italiano
Français
Deutsch
Español