€1.67
1,67 € tax excl.
Cuscinetto delrin
Misure disponibili
Ø 20 mm
Ø 24 mm
Round nylon wheel with bearing for sliding door 19-23-25-27 mm
Reference:
TRNT-KHEC27
Round nylon wheel with flared hole with bearing for sliding door.
External diameter of the wheel 19 mm: Ø flared inner 7 mm, Ø opposite inner 5 mm, Thickness 5 mm
External diameter of the wheel 23-25-27 mm: Ø flared inner 7 mm, Ø opposite inner 5 mm, Thickness 5,5 mm
FEATURES:
- Strong load-bearing capacity
- Good for the glass door of the bathrooms, furniture, windows etc ...
- Material: High-quality nylon wheel + steel bearing
- M5 screw
€6.48
6,48 € tax excl.
Add to wishlist
other products in the same category:
€7.30
7,30 € tax excl.
U-shaped support in tropicalized iron 50 x 26 x 15 mm
Nylon wheel Ø 30 mm Round groove
Specifications:
Diameter 30 mm
Thickness 10 mm (Thickness with bushing 11 mm)
Round throat diameter 6 mm - radius 3 mm...
€20.49
20,49 € tax excl.
Inflatable rubber wheel, ball bearing hub for trolley.
Wheel size ØxL 260x75 mm
Capacity 130 Kg
Wheel hole ØxL 16x50 mm
€22.13
22,13 € tax excl.
Round groove grooved wheel - O2 in iron for normal C45 sliding gates with 2 Rolling Center bearings
Measurements as per images.
€7.26
7,26 € tax excl.
Nylon wheel D.60x17 throat V C / Cusc. bolt M10 and 2 bushings, Article 617VN for gates and low noise grates
Out-of-StockSold out
€5.00
5,00 € tax excl.
Materials:
Outer rings and pins in AVP steel - Coating in Nylon 6/6 loaded with fiberglass - Balls in Cr TMP steel.
- Wheel diameter 22 mm(D),
- Internal hole diameter 6 mm(d),
- Inner ring diameter 10...
€7.38
7,38 € tax excl.
nylon wheel 35 mm round gola
specifications:
Diameter 35 mm
Thickness of 7 mm
Round throat diameter 5 mm - 1,5 mm approximately
Hole Ø 6
€4.39
4,39 € tax excl.
Ruota con cuscinetto per scorrevole Ø 32 mm con gola diametro 5 mm
Foro da 6 mm
Spessore ruota 8 mm
Spessore su boccola 10 mm
€4.84
4,84 € tax excl.
Bearing wheel for sliding shower enclosure door.
- Wheel Outer Diameter: 23mm
- Wheel Inner Diameter: 5mm
- Wheel thickness: 7mm
FEATURES:
High load capacity, very resistant product
For glass doors of...
€7.38
7,38 € tax excl.
Nylon wheel Ø 12 mm flat type
Specifications:
Diameter 12mm
Thickness 3mm
bolt 3 but length 4 mm
€5.33
5,33 € tax excl.
Nylon wheel Ø 16 mm flat type
Specifications:
- Diameter 16 mm
- Thickness 5.5 mm
- Hole Ø 5 mm
€5.00
5,00 € tax excl.
Bearing diameter 19 mm
Pad thickness 5.6 mm
Total thickness 24mm
Thickness without screw 18 mm
Screw thickness 6 mm
Screw pitch 5MA
Pin hole with 4MA pitch
Bearings particularly suitable for use...
€5.90
5,90 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.002.00
Specifications:
D - 9,5 mm diameter
P - Thickness 3,2 mm
B - Hole Ø 4,76 mm
€9.84
9,84 € tax excl.
Bathroom Shower Glass Sliding Door Rollers Top & Bottom Wheels
Description:
Diameter of wheels: 27/25mm
Width of wheels: 5mm
Minimum Hole size in the glass: 11mm.
Materials: Plastic, Nylon, 304 stainless...
€6.48
6,48 € tax excl.
nylon wheel 22 mm round gola
specifications:
Diameter 22 mm
Thickness of 7 mm
Round throat diameter 4,2 mm - 1,8 mm approximately
Hole Ø 6
€9.02
9,02 € tax excl.
nylon wheel 45mm round Gola
specifications:Diameter 45 mmThickness of 11,5 mm (thickness 13 mm with bushing)Round throat diameter 6 mm - radius 3 mm approximatelyHole Ø 8
€6.97
6,97 € tax excl.
Adjustable built-in sliding trolley with Ø 25 mm nylon wheel, for cabinet door with half moon support in nickel-plated iron 60 x 37 mm
Nylon wheel Ø 25 mm Round groove
Specifications:
Diameter 25 mm
Thickness...
€4.10
4,10 € tax excl.
Lower slide with Ø 19 mm nylon roller with groove, plate and fixing screws for showcase door. For D - H aluminum profiles.
Old code 140/03.
Measures looks image.
€4.84
4,84 € tax excl.
Wheel with bearing for sliding shower box with threaded connection and bolt or screw.
External diameter of the wheel 19 mm: Ø inner 4 mm, Thickness 4,5 mm
External diameter of the wheel 23-25-27 mm, Thickness 5,5...
Out-of-StockSold out
€3.11
3,11 € tax excl.
Ø 28 Omge rubberized plane bearing
Total thickness 9.5 mm
Rubber thickness 6 mm
€2.05
2,05 € tax excl.
Steel roller steel wheel with groove for sliding doors Ø 18 mm ball bearing wheel
Available wheel sizes
Ø 18 mm - centre to centre distance 4 cm
€49.10
49,10 € tax excl.
Article 489/E
Spring support wheel for swing gate
IBFM article 489/E
Capacity: 150 Kg
€18.03
18,03 € tax excl.
Complete kit K.1296.2.10.3 (Old code 718/E/A) for 1 door. For adjustable sliding doors with suspended wooden doors, maximum capacity 80 Kg. Scorrisospensione is the sliding system for furniture with overlapping wooden...
€9.02
9,02 € tax excl.
Nylon wheel Ø 48 mm Round groove
Specifications:
Diameter 48 mm
Thickness 9mm
Round throat diameter 6 mm - radius approximately 3 mm
Hole Ø 8
€6.48
6,48 € tax excl.
nylon wheel 25mm round gola
specifications:
Diameter 25 mm
Thickness of 8,5 mm (thickness 10 mm with bushing)
Round throat diameter 6 mm - radius 3 mm approximately
Hole Ø 5
€13.93
13,93 € tax excl.
Specifications:
For wooden doors maximum capacity 40 kg
Drilling: Ø 35 mm
Finish: Bronze - Galvanized
Complete kit with:
2 pieces bottom slide
2 pieces top spring guide
2 pieces upper retainers
€12.00
12,00 € tax excl.
Specifications:
For wooden doors maximum capacity 50 kg
Drilling: Ø 35 mm
Wheel 30 mm
Finish: Bronze
Complete kit with:
2 pieces bottom slide
2 pieces top guide
4 pieces retainers
€12.30
12,30 € tax excl.
V-groove grooved wheel - V1 in iron for normal C45 sliding gates with 1 Rolling Center bearing
Measurements as per images.
€5.00
5,00 € tax excl.
Wheel diameter 22 mm
Pad thickness 4.2 mm
Total thickness 26mm
Thickness without screw 19.6 mm
Screw thickness 6 mm
Screw pitch 6MA
Bearings particularly suitable for use in shower enclosures...
€43.76
43,76 € tax excl.
Central steel carriage for sliding folding doors Rolling Center 4 Wheels D.50 Hole D.16 Central art.CA 4RP
Measures looks image.
€65.49
65,49 € tax excl.
Amortized wheel with adjustable support for swing gates, easy overlapping type assembly.
IBFM article 489
Capacity: 170 Kg
€1.64
1,64 € tax excl.
Ball bearing wheel in PA suitable for sliding furniture drawer runners etc.
- Diameter 23 - 25 - 28 - 30 mm
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Italiano
Français
Deutsch
Español