Out-of-StockSold out
€3.11
3,11 € tax excl.
Ø 28 Omge rubberized plane bearing
Total thickness 9.5 mm
Rubber thickness 6 mm
Omge delrin bearing 1200.200.00
Reference:
1220.200.00
Cuscinetto delrin
Misure disponibili
- Ø 20 mm
- Ø 24 mm
€1.67
1,67 € tax excl.
Add to wishlist
You may also like
€1.67
1,67 € tax excl.
Cuscinetto delrin
Misure disponibili
Ø 20 mm
Ø 24 mm
other products in the same category:
€6.00
6,00 € tax excl.
Sliding gasket for one drawer in lacquered steel, with lower angle fixing
€27.46
27,46 € tax excl.
Nylon wheel 1 bearing with round groove, Ø 64x80 mm complete with bolt article 400NY.80 / 16 Combi
Measurements as shown in the images.
Out-of-StockSold out
€11.36
11,36 € tax excl.
System 9400 4 INF
Kit consisting of 6 pieces
Fastening system by quick coupling without screws.
Adaptable to any thickness.
It includes standard holes mm 32, diameter 8 mm and 5 mm on the top and bottom of the...
€14.67
14,67 € tax excl.
Lower U-shaped track in aluminum for Koblenz folding sliding system for wardrobes, length 1.5 m, capacity 40 kg
€25.41
25,41 € tax excl.
Track drilled and anodized aluminum for sliding door system Koblenz, length 2 Mt capacity 40 Kg
€6.97
6,97 € tax excl.
Adjustable built-in sliding trolley with Ø 25 mm nylon wheel, for cabinet door with half moon support in nickel-plated iron 60 x 37 mm
Nylon wheel Ø 25 mm Round groove
Specifications:
Diameter 25 mm
Thickness...
€258.20
258,20 € tax excl.
Sliding kit complete with 3-metre track, for wardrobe sliding system with 2 overlapping doors with 4 air-cushioned stops and 4 snap-on guides for doors up to 80kg capacity.
Maximum door thickness 28 mm.
€85.14
85,14 € tax excl.
Battery arrest at the end of the galvanized cushioned race to pay for sliding gates article 384 Combi
Measures as per images
€61.64
61,64 € tax excl.
The Kit includes :
Scroll trolley (2 pieces)
Door anchor profile (1 pcs)
Trolley anchor profile (2 pieces)
Bottom guide (1 pieces)
Holding brakes (2 pieces)
CHARACTERISTICS:
Function : Allows you...
€9.75
9,75 € tax excl.
360 ° pivot with the turntable drilled Ø9 mm, maximum capacity 150 Kg
€7.38
7,38 € tax excl.
nylon wheel 30mm round gola
specifications:
Diameter 30 mm
Thickness of 11 mm
Round throat diameter 6 mm - radius 3 mm approximately
Hole Ø 8
€40.28
40,28 € tax excl.
Sliding system 0200/50 with trolley for wooden folding doors
SYSTEM 0200/50 (50 Kg)
Kit Art. 0200/1.1 capacity 50 kg
Perforated and black anodized track 1 m pcs 1
Upper/lower central hinge pcs 2
Top side hinge...
€2.52
2,52 € tax excl.
Ø 24 Omge rubberized rounded bearing,
with 6 mm thickness and 11 mm inner hole
New
€5.33
5,33 € tax excl.
Replacement lower trolley with adjustable ball bearings for 0105 Krona-Koblenz sliding door, with 30 mm nylon wheel and 35 mm hole on the door.
CHARACTERISTICS:
Function : Allows sliding doors for office or shop...
€1.36
1,36 € tax excl.
Fixed wheel with metal fixing bracket suitable for linear sliding for chests of drawers and furniture in general.
Features:
Wheel 35 mm
Roller width 13 mm
Installation height 41 mm
Load bearing capacity 40 kg...
€16.39
16,39 € tax excl.
Lower rail 3 meter for glass-front cabinets.
Material: Anodised aluminum
Finishing: Brushed silver
€10.03
10,03 € tax excl.
Sliding system with lower carriage and upper sliding block for 35mm hole furniture door
The kit art. 0310/9 capacity 43 kg contains:
Lower carriage with Delrin wheel 2 pcs
Upper sliding block 2 pcs...
€9.43
9,43 € tax excl.
Nylon wheel Ø 50 mm with U-shaped groove
Specifications:
- product dimensions: hole 8 mm - diameter 50 mm - thickness 12 mm
- U groove dimensions : width 6.5mm - depth 5mm - internal diameter 40mm
-...
€5.00
5,00 € tax excl.
Bearing diameter 24 mm rounded profile
Pad thickness 6 mm
Total thickness 27mm
Thickness without screw 20.4 mm
Screw thickness 6.6 mm
Screw pitch 6MA
Pin hole with 4MA pitch
Bearings...
€5.00
5,00 € tax excl.
Wheel diameter 22 mm
Pad thickness 4.2 mm
Total thickness 26mm
Thickness without screw 19.6 mm
Screw thickness 6 mm
Screw pitch 6MA
Bearings particularly suitable for use in shower enclosures...
€30.33
30,33 € tax excl.
Sliding system for folding door with opening via hinge 1133 for leaves up to 30 kg complete with 1 m aluminum track.
Minimum door thickness 28 mm.
€1.64
1,64 € tax excl.
Ball bearing wheel in PA suitable for sliding furniture drawer runners etc.
- Diameter 23 - 25 - 28 - 30 mm
€4.84
4,84 € tax excl.
Nylon wheel Ø 15 mm flat type
Specifications:
-Diameter 15 mm
-Thickness 4 mm
-Hole Ø 3
€4.39
4,39 € tax excl.
Ruota con cuscinetto per scorrevole Ø 32 mm con gola diametro 5 mm
Foro da 6 mm
Spessore ruota 8 mm
Spessore su boccola 10 mm
€5.33
5,33 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.005.00
Specifications:
D - 22 mm diameter
P - Thickness 7 mm
B - Hole Ø 8 mm
€34.84
34,84 € tax excl.
Sliding system 0500 with zamak trolleys, available with 2-wheel trolleys on independent bearings for capacities up to 60 kg or with 4 for capacities up to 120 kg. Ideal for making wooden sliding doors both inside and...
€228.69
228,69 € tax excl.
Magic2 is the multi-patented system, designed and produced by Terno Scorrevoli, totally Made in Italy. A product that integrates the magic of architectural minimalism and the smoothness of an extremely tested system -...
€7.38
7,38 € tax excl.
Nylon wheel Ø 12 mm flat type
Specifications:
Diameter 12mm
Thickness 3mm
bolt 3 but length 4 mm
€6.48
6,48 € tax excl.
nylon wheel 25mm round gola
specifications:
Diameter 25 mm
Thickness of 8,5 mm (thickness 10 mm with bushing)
Round throat diameter 6 mm - radius 3 mm approximately
Hole Ø 5
€25.41
25,41 € tax excl.
PVC rail 2,5 meters for sliding picture holder "museo", white finish.
Measures looks image.
€4.84
4,84 € tax excl.
Bearing wheel for sliding shower enclosure door.
- Wheel Outer Diameter: 23mm
- Wheel Inner Diameter: 5mm
- Wheel thickness: 7mm
FEATURES:
High load capacity, very resistant product
For glass doors of...
Customers who bought this product also bought:
€17.95
17,95 € tax excl.
Lower slider for external door.
L (Left) R (Right)
€4.92
4,92 € tax excl.
Euroscrew Flat CSK head for wood, 100 pieces, head Ø 8 mm(dk), galvanized finish, Ø 6.3 mm(diam), height 11 mm(b), total height 13 mm(I).
Measures looks image.
€5.00
5,00 € tax excl.
Wheel diameter 19 mm
Pad thickness 5.6 mm
Total thickness 10mm
Hole with 4MA pitch
Bearings particularly suitable for use in shower enclosures
Materials:
Nylon coated brass outer ring
Brass pin...
€5.00
5,00 € tax excl.
Excellent anti-squeak and anti-squeak effect. Excellent water-repellent protection on fabrics, including rubberized ones; antioxidant for metals and steels. Odorless and colorless. Meets the requirements of: European...
€5.57
5,57 € tax excl.
BINDAN-RS B2/D2 is supplied in sizes: 100 gr blister and basic, 250 gr, 500 gr, 600 gr, 800 gr, 1 Kg, 2,5 Kg, 5 kg, 10 kg, 25 Kg, 150Kg.
Bindan RS is a rapid glue B2, pure, devoid of fillers. Resistant to moisture...
Questions (0)
No customer questions for the moment.
Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Italiano
Français
Deutsch
Español