€7.54
7,54 € tax excl.
92 mm short 11R 15 adjustable hingefor wooden doors and windowsAdjustable 0/+3 mm in height, +/- 3 mm laterally and in depth
Filter By
Filter By
Home
Filter By
€12.30
12,30 € tax excl.
Adjustable hinge 11R of 20 Long 112 mm for wooden doorsAdjustable 0/+3 mm in height, +/- 3 mm laterally and in depth
€0.82
0,82 € tax excl.
Standard hinge 9 in steel for furniture SFS intec
€1.90
1,90 € tax excl.
20R adjustable steel hinge 14 SFS intecfor wooden doors and windowsadjustable up to 3 mm in height
€24.15
24,15 € tax excl.
The adhesive cushion strip helps to prevent slipping of the guide rail even on smooth materials, while simultaneously protecting the surface of the workpiece from damage. In the event of wear or damage, it should be...
€16.01
16,01 € tax excl.
Adjustable 11R 20 hinge with anti-theft device for wooden doors
Adjustable 0 / + 3 mm in height, +/- 3 mm laterally and in depth
The stems of the male are both rotating and self-tapping
€7.86
7,86 € tax excl.
Releasable nickel-plated steel hinge to be used as rostrum for door alignment.
Cup diameter of Ø 16.2 mm for door and the frame.
€360.66
360,66 € tax excl.
Aluminum scaffolding H3.60 M 2 half-levels and 4 wheels Ø 125 ZEUS
The ease of movement is the strong point of the TRABATTELLO ZEUS Marchetti, thanks to the 4 wheels Ø 125 mm equipped with brakes. Quick to assemble...
€10.66
10,66 € tax excl.
Water-based finish with wax effect Amonn aquatop Colorless 00 for external and internal applications
For finishing work on wood inside and outside with dimensional stability and partial dimensional stability not in...
€19.57
19,57 € tax excl.
Amonn Lignex aquagel transparent wax waxed finish White 51, for indoor and outdoor use
For impregnation work on wood inside and outside, not with dimensional stability and not in direct contact with the ground or...
€15.23
15,23 € tax excl.
LIGNEX GARTEN OEL - Garden furniture and outdoor wooden floors need special protection. The oil, penetrating deeply, protects the wood from the inside, preventing cracks or splits from forming and slowing down the...
€223.77
223,77 € tax excl.
Anodized aluminum ladder stool type with parapet Class plus
Available with 3 and 4 rungsFlat steps with double reinforced profile, non-slip, 360x230 mm.Nylon blend feet, anti-slip.When closed, they guarantee a...
€0.99
0,99 € tax excl.
14 steel anuba hinge for doors and frames SFS intec
Used for moving doors and windows made of wood or composite materials.
€2.12
2,12 € tax excl.
Anuba hinge 14 in steel with 3 legs, sliding pin for SFS intec doors and fixtures, center distance 13.7 mm
€4.39
4,39 € tax excl.
Anuba hinge 16 in steel with 3 legs, sliding pin for SFS intec doors and fixtures, center distance 15.5 mm
€0.87
0,87 € tax excl.
Standard hinge 11 in steel for furniture SFS intec
€376.16
376,16 € tax excl.
Articulated arm for vacuum hose and cable for safe and simplified suction. Perfect for prolonged sanding work. The hose is always carried from above, making the job easier. To be mounted directly on the mobile...
€6.94
6,94 € tax excl.
Central hinge for door
Article 706618 nickel matt steel
Article 1272193 brassed steel
€47.13
47,13 € tax excl.
COMPLETE CRANKSET FOR ONE DOOR.
Pivot and hinge for doors in wood wire
Article 1272070 matt chrome
Article 516 543 gold
€48.36
48,36 € tax excl.
LCD display, when the arm is extended the angle it makes with the base is indicated clearly on digital read-out to the nearest 0,05°. The measuring range is 0 - 360°. The vials allow variations from the vertical and...
€58.48
58,48 € tax excl.
Collet for all cutters with a shank diameter of Ø 6 mm.
The union nut is conical and fits perfectly into the router holder
With locking nut
Suitable for Festool MFK/OFK 700 - MFKC 700 - OF 900 - OF 1000 - OF...
€58.48
58,48 € tax excl.
Collet for all cutters with a shank diameter of Ø 8 mm.
The union nut is conical and fits perfectly into the router holder
With locking nut
Suitable for Festool MFK/OFK 700 - MFKC 700 - OF 900 - OF 1000 - OF...
€21.21
21,21 € tax excl.
For finishing work on wood inside and outside with dimensional stability and partial dimensional stability not in direct contact with the ground or with water. It is particularly suitable for outside doors and...
€0.12
0,12 € tax excl.
Z-type cross recessed flat head screw, for chipboard, in case-hardened steel, yellow galvanized (CrVI free) and waxed.
The special PATENTED thread allows for faster, more practical and safer tightening even in the...
€2.01
2,01 € tax excl.
Cover for CAB-E or CIR SFS intec poised hinge adaptable invisible
€174.59
174,59 € tax excl.
The V 1600 door stop is specific for doors with hinged leaves, right and left, flush and overlapping, designed for mounting on the front of the door with a vertical direction.
X dimension; Hook 1009 for flush...
€122.13
122,13 € tax excl.
Climb evo double ladder with parapet
Double ladders in electro-welded aluminium with flat steps (80 mm) and a single ascending section, equipped with a platform and guardrail.Ideal for intensive professional use .The...
€357.55
357,55 € tax excl.
For precise sawing work with a stop up to a cutting width of 610 mm. Easy attachment to the base table of the CS 50 VB with subsequent fine adjustment. The width extension table is usually fitted on the right.
The...
€278.28
278,28 € tax excl.
The CS 70 VL length extension table can be attached to the rear table side of the CS 70 EB. The saw table is thus extended by 580 mm, and is ideally suited to being a steady support for long workpieces. The length...
€113.93
113,93 € tax excl.
Galvanized steel scaffolding H1.88 M 1 worktop and 2 wheels TRIO
Indispensable for small maintenance jobs, the TRIO galvanized steel scaffolding is easy to transport and very quick to assemble, it passes through...
€5.25
5,25 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.003.00
Specifications:
D - 12,7 mm diameter
P - Thickness 5 mm
B - Hole Ø 4,76 mm
€4.10
4,10 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.006.00
Specifications:
D - 16mm diameter
P - Thickness 5 mm
B - Hole Ø 5 mm
€4.92
4,92 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.004.00
Specifications:
D - 19 mm diameter
P - Thickness 7 mm
B - Hole Ø 6,35 mm
€5.33
5,33 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.005.00
Specifications:
D - 22 mm diameter
P - Thickness 7 mm
B - Hole Ø 8 mm
€5.90
5,90 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.002.00
Specifications:
D - 9,5 mm diameter
P - Thickness 3,2 mm
B - Hole Ø 4,76 mm
€0.87
0,87 € tax excl.
Hinge anuba steel 13 article 20 SFS intec
€27.87
27,87 € tax excl.
COMPLETE SET FOR ONE DOOR.
Hinge and pivot for flush wooden doors
article 632684 tropical steel
Load capacity per pair 70 kg
€63.93
63,93 € tax excl.
Kit composed of 5 Packs of waxed bronze plated screws:
CSK screw for chipboard Ø 4 x 40 mm (500 pcs)
CSK screw for chipboard Ø 5 x 50 mm (200 pcs)
CSK screw for chipboard Ø 5 x 60 mm (200 pcs)
CSK screw for...
€57.20
57,20 € tax excl.
Kit composed of 5 Packs of waxed yellow zinc plated screws:
CSK screw for chipboard Ø 4 x 40 mm (500 pcs)
CSK screw for chipboard Ø 5 x 50 mm (200 pcs)
CSK screw for chipboard Ø 5 x 60 mm (200 pcs)
CSK screw for...
€47.35
47,35 € tax excl.
Kit composed of 6 Packs of waxed yellow zinc plated screws Torx:
CSK screw for chipboard Ø 3 x 16 mm (500 pcs)
CSK screw for chipboard Ø 3.5 x 18 mm (500 pcs)
CSK screw for chipboard Ø 3.5 x 25/18 mm (500 pcs)
CSK...
€37.79
37,79 € tax excl.
Kit composed of 6 Packs of waxed bronze plated screws:
CSK screw for chipboard Ø 3 x 16 mm (500 pcs)
CSK screw for chipboard Ø 3.5 x 18 mm (500 pcs)
CSK screw for chipboard Ø 3.5 x 25 mm (500 pcs)
CSK screw for...
€33.61
33,61 € tax excl.
Kit composed of 6 Packs of waxed white galvanized screws:
CSK screw for chipboard Ø 3 x 16 mm (500 pcs)
CSK screw for chipboard Ø 3.5 x 18 mm (500 pcs)
CSK screw for chipboard Ø 3.5 x 25 mm (500 pcs)
CSK screw...
€36.15
36,15 € tax excl.
Anti-woodworm in ready-to-use organic solventTherapy and prevention - Lignex Defend is the anti-itch specially developed to treat wood attacked by the so-called "house capricorn" (Hylotrupes Bajulus). Its special...
€131.00
131,00 € tax excl.
Single aluminum ladder AL
Corrugated profile, for a more secure grip. Non-slip.
€237.70
237,70 € tax excl.
Equipe Aluminum Telescopic Ladder
Extruded aluminum ladder, telescopic extension, the external trunk has a widened base.Designed for intensive professional use.Can be used as a leaning, double or lame ladder.
€4.34
4,34 € tax excl.
PCL-3B GRAPHITE MINE
IDEAL FOR: Paper, Wood, Laminates, Building Material, Artificial Stones and Stones, Metals and Non-Ferrous Metals.
€5.33
5,33 € tax excl.
PCL-3C GRAPHITE AND PASTEL MINE
2 pcs Graphite - 2 pcs Yellow - 2 pcs Red
IDEAL FOR: Plastic Materials, Ceramic Materials, Glass, Paper, Wood, Laminates, Building Materials, Artificial Stones and Stones, Metals...
€42.94
42,94 € tax excl.
COMPLETE CRANKSET FOR ONE DOOR
Adjustable hinge and pivot for flush wooden doors
article 1272272 galvanized
€22.30
22,30 € tax excl.
One-component polyurethane water-based varnish for parquet, interior and furniture coverings
Yield: 8 - 10 m² / l
Dry to the touch after about 20 minutes
€14.67
14,67 € tax excl.
COMPLETE KIT FOR ONE DOOR (1 left hinge + 1 right hinge)
Hinge and pivot for flush wooden doors
article 954008 matt nickel-plated steel
article 1272496 brass-plated steel
Load capacity per pair 50 kg
€157.38
157,38 € tax excl.
MARCHETTI professional double-sided aluminum ladder PABLO
Available from 3 to 9 rungs
Automatic platform of 270x250 mm that allows the operator to use it as a support base for buckets or tool boxes
Comfort rung...
€13.24
13,24 € tax excl.
HYDROGRUND PLUS colorless fund fungicide impregnating water based preventively protects the wood against blue stain, mildew and fungus destructors. It is ideal for the preventive treatment of outer wood , provided...
€15.57
15,57 € tax excl.
Amonn Aqua Lignex water-based protective impregnating agent for exterior wood
For impregnation work on wood not with dimensional stability and not in direct contact with the ground or with water such as cladding,...
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 16 mm diameter
L - Length 45mm
d - Hole Ø 13 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 12mm diameter
L - Length 25mm
d - Hole Ø 6 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 8mm diameter
L - Length 25mm
d - Hole Ø 6 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 12mm diameter
L - Length 25mm
d - Hole Ø 8 mm
€155.49
155,49 € tax excl.
The circular saw blade for metals and steel. Carbide-tipped circular saw blade with flat tooth for maximum durability and long service life. Made from high-quality steel with saw teeth made from fine-grain carbide....
€41.50
41,50 € tax excl.
Flat countersunk head screw, cross recess type Z or pozidrive, for chipboard in A2 stainless steel (AISI 304), particularly suitable for assembling hardware on wood, external wooden structures, assembling chipboard...
-30%
€5.01
€7.16
5,01 € tax excl.
Z-type cross recessed flat head screw, for wood and chipboard, in case-hardened steel, bronzed (CrVI free) and waxed.
The special PATENTED thread allows for faster, more practical and safer tightening even in the...
-30%
€4.31
€6.15
4,31 € tax excl.
Z-type cross recessed flat head screw, for chipboard, in case-hardened steel, white galvanized (CrVI free) and waxed.
The special PATENTED thread allows for faster, more practical and safer tightening even in the...
-30%
€4.17
€5.95
4,17 € tax excl.
Z-type cross recessed flat head screw, for chipboard, in case-hardened steel, yellow galvanized (CrVI free) and waxed.The special PATENTED thread allows for faster, more practical and safer tightening even in the...
€33.00
33,00 € tax excl.
Mix of 25 abrasive discs Ø 225 mm.
Brilliant2 for roughing, intermediate sanding, and finishing of furniture:
5 pieces P150 BR2
5 pieces P180 BR2
5 pieces P240 BR2
Cristal for coarse and rapid pre-sanding of...
€65.57
65,57 € tax excl.
The Set contains:
552-705 Ø 5mm (3/16 ")
552-706 Ø 6mm (1/4 ")
552-708 Ø 8mm (5/16 ")
552-712 Ø 12mm (1/2 ")
552-GUIDE
552-EX14 - HEXAGONAL ADAPTER FOR DRILL BIT
€12.49
12,49 € tax excl.
Paper filter for turbo suction. Insert into the frame with a filter bag. For the collection and disposal of material extracted by the sander.
Suitable for Festool RS 100 - RS 1.
€13.50
13,50 € tax excl.
The splinter guard, mounted in place of the scoring cut, allows tear-free cuts to the right of the blade. When the machine is in operation, the inserted splinter guard is scored and thus precisely adapted to the...
€286.89
286,89 € tax excl.
This set of 3 multifunctional cutters for making entrance and passage doors. Working in conjunction with the tongue and groove cutters, the set allows you to produce reinforced tenons up to 27mm in length with minimal...
€139.34
139,34 € tax excl.
The complete kit (item code 835-935.503.11), will enable you to produce 17 different rabbet sizes including rabbets for under-sized plywood applications.
For rabbet sizes over 12,7mm (1/2”), make the cuts in several...
€1.56
1,56 € tax excl.
Hinge anuba 14 steel door and window frames SFS intec wheelbase 13.6 mm
€113.31
113,31 € tax excl.
SFS intec Set - Wire Application - matched 13/14
€113.31
113,31 € tax excl.
Set - wire application - matched by 9/11 for doors and window frames SFS intec
€3.20
3,20 € tax excl.
Adjustable hinge 11R by 14 for wooden doors and windowsAdjustable 0/+3 mm in height, +/- 3 mm laterally and in depth
€39.05
39,05 € tax excl.
15 mm door closer with two strips for flush fire doors
€167.65
167,65 € tax excl.
Set - knocker application for adaptable hinges 14 SFS intec for 11 R
€1.35
1,35 € tax excl.
Hinge anuba 16 steel for door and window frames SFS intec distance 15.6 mm
€1.78
1,78 € tax excl.
Hinge Anuba Z Steel 14 for door and window frames SFS intec center distance 13.6 mm
Stem off-axis for special applications.
€12.55
12,55 € tax excl.
Hinge stainless steel Anuba 14 for door and window frames SFS intec wheelbase 13.6 mm
€1.54
1,54 € tax excl.
Hinge anuba 11 steel door and window frames SFS intec wheelbase 10.9 mm
€3.83
3,83 € tax excl.
Hinge anuba 14 steel for door and window frames SFS intec distance 13.6 mmType extended POMELLAS effect
€2.45
2,45 € tax excl.
Hinge anuba 14 steel for door and window frames SFS intec wheelbase 13.6
With blocking system for wasistas
€2.24
2,24 € tax excl.
Hinge anuba 16 steel door and window frames SFS intec wheelbase 15.6 mm
€1.54
1,54 € tax excl.
Hinge anuba 9 steel door and window frames SFS intec wheelbase 9.9 mm
€2.46
2,46 € tax excl.
SFS hinge for PVC windows and multi-material applications.
Male with 3-screw mounting
Female with m7x40mm pin
Body diameter 15 mm, brass finish.
SFS products are characterised by load resistance, design...
€106.91
106,91 € tax excl.
Set - knocker application for adaptable hinges from 15 SFS intec for 11 R and 12 R long without air
€167.65
167,65 € tax excl.
Set - knocker application for adaptable hinges from 20 SFS intec for 11 R and 12 R Long
€114.67
114,67 € tax excl.
SFS intec Set - Wire Application - matched 14/16
€167.65
167,65 € tax excl.
Set - Wirw Application adaptable hinges from 14 to 11R SFS intec
€167.65
167,65 € tax excl.
Set - Wire Application adaptable hinges from SFS intec 15 to R 11 and R 12 short
€167.65
167,65 € tax excl.
Set - Wire Application for adaptable hinges from 20 SFS intec for 11 R and 12 R Long
Showing 1-90 of 137 item(s)
Italiano
Français
Deutsch
Español