€1.56
1,56 € tax excl.
90 ° angle in aluminum 21 / 19.F2 for Volpato plinth 20 / 10.400AL
Available height 100mm / 120mm / 150mm
Filter By
Filter By
Home
Filter By
€2.46
2,46 € tax excl.
Accessory kit for upstand 50 / 65.400AL which includes
Internal corner
External corner
Right Cap
Left Cap
€12.30
12,30 € tax excl.
Adjustable click arm for wasistas window with outward opening
tropicalized steel finish
€4.84
4,84 € tax excl.
Small brass-plated adjustable cremone bolt mechanism from window only central locking lever
article 173 IBFM
€10.66
10,66 € tax excl.
Adjustable click arm for wasistas window with internal opening
tropicalized steel finish
€4.10
4,10 € tax excl.
Spacer / spacer diameter 35 mm for grates adjustable from 30 to 40 mm, in galvanized iron, with hole of 14.5 mm
IBFM article 877
€0.90
0,90 € tax excl.
Adjustable spacer for assembling iron frames article 878, in galvanized steel + Threaded bushing article 878 / A
IBFM article 878 + 878 / A
€12.30
12,30 € tax excl.
Horizontal round small bolt in black painted aluminum with staple and with exposed fixing screws, and digital combination locking system. To be used in order to lock drawers, cabinets, openings or door leaves....
€65.49
65,49 € tax excl.
Amortized wheel with adjustable support for swing gates, easy overlapping type assembly.
IBFM article 489
Capacity: 170 Kg
€5.33
5,33 € tax excl.
BINDAN-P B3/D3 is supplied in sizes: 100 gr blister and basic, 250 gr, 500 gr, 570 gr, 800 gr, 1 Kg, 2,5 Kg, 5 kg, 10 kg, 25 Kg, 150Kg.
Without fillers, resistant to water and mold. No solvents or formaldehyde,...
€5.57
5,57 € tax excl.
BINDAN-RS B2/D2 is supplied in sizes: 100 gr blister and basic, 250 gr, 500 gr, 600 gr, 800 gr, 1 Kg, 2,5 Kg, 5 kg, 10 kg, 25 Kg, 150Kg.
Bindan RS is a rapid glue B2, pure, devoid of fillers. Resistant to moisture...
€6.07
6,07 € tax excl.
Double action bolt or bolt in galvanized steel for metal frames for shutters and protected windows, single lever to close the two ways with M8 pitch
IBMF article 422
€2.02
2,02 € tax excl.
Suitable for closing floor lock rods, with protective lock article 475 IBFM
Measure = A
A - internal hole diameter
B - flange width
C - well outside diameter
A mm
6
8
10
12
14
16
18
20
22...
€114.75
114,75 € tax excl.
Complete kit for opening a window:
- Crank control
- Actuator
- Cable
- Sheath
- Fixing saddle and accessories
- Standard cable and sheath length m.3
For window drives on Wasistas always apply a safety arm.
€21.31
21,31 € tax excl.
Black painted zamak cremone handle with key, internal rod application for iron window.
Key lock for window or frame locking.
Available (R) Right - (L) Left.
Measures looks image.
€12.30
12,30 € tax excl.
Cremonese locking mechanism for windows with full 180 ° turn,
brass finish,
article 169 IBFM
€6.15
6,15 € tax excl.
Cutlery tray gray trimmable for drawer 40-45 cm Volpato 32/72, plastic material obtained by injection molding or thermoforming, eco-friendly, suitable for contact with food and excellent scratch resistance. Width 356...
€7.38
7,38 € tax excl.
Cutlery tray gray trimmable for drawer 55-60 cm Volpato 32/72, plastic material obtained by injection molding or thermoforming, eco-friendly, suitable for contact with food and excellent scratch resistance. Width 501...
€14.75
14,75 € tax excl.
Couple of hinges (the package contains 02 pcs) with automatic double action spring in steel, for Saloon type doors
Available sizes: 75 mm - 100 mm - 150 mm
Finishes available
Black painted steel
Nickel...
€4.10
4,10 € tax excl.
Guide for latch for wasistas windows with bent strike, total arm size 19 cm (arm 18 only)
sliding slot 14 cm
base attacks 2.5x2.5 and 3.3x2.5 cm
IBMF article 347
FINISHES:
Tropicalized steel
Bronzed Steel
€79.26
79,26 € tax excl.
Guide Rail 800 mm for plunge saws, Circular Saws, Jigsaws and Routers.
Safe and straight guidance of the machine
Protects the workpiece surface from damage
Coating for smooth machine movement
€39.93
39,93 € tax excl.
3-wing hinges for heavy and fire rated doors with screwed lid and closing spring. To obtain a greater load capacity it is possible to use more than one pair of hinges, just paying attention to their vertical spacing....
€53.28
53,28 € tax excl.
Hinges for heavy fire rated doors with 3 wings with screwed lid and closing spring
Max load: 2 hinges 150 Kg
€0.74
0,74 € tax excl.
Plug-in socket hook in black plastic
for snap hooking of the furniture foot
€13.03
13,03 € tax excl.
IBFM Free-Occupied Deadbolt art. 37 for bathroom emergency opening, nickel-plated steel
Used in the lever closure of bathroom doors of rooms or trains
€23.77
23,77 € tax excl.
Volpato 80 / G1.1A90B aluminum internal corner for Volpato 80 / G1.2AL classic horizontal groove profile
€3.34
3,34 € tax excl.
CORDLESS MULTI FOR ROTARY DRILLING ONLY - NO HAMMER/PERCUSSION drill bits are ideal for drilling the most common materials, including: brickwork, breeze block, wood, dry wall, slate, plastics, sheet metal. Unique...
€31.97
31,97 € tax excl.
DIAMOND - COOL WATER - NO PERCUSSION for fast, smooth cutting in all grades of hard and soft tiles.
Drilling with water increases the lifespan of the tool. Do not press strongly on the tool, let it work. Make a...
€5.39
5,39 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite. Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill bits....
€18.20
18,20 € tax excl.
CORDLESS MULTI is able of drilling wide selection of materials: brick, marble, metal, tile, slate, gypsum, limestone, hard plastic, wood, cast iron and hardened steel.Plastic box of 5 pieces with bits 4 - 5 - 6 - 8 -...
€25.33
25,33 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite.Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill...
€9.20
9,20 € tax excl.
BLUE GROOVE 4X Four times faster than the basic flat drill bits double Cutting Spurs scribe outside of the hole, reducing breakout.
Thicker Cutting Edge for longer drilling life. Bluegroove Point & Cutting Edge...
€10.88
10,88 € tax excl.
TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure.
Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...
€3.26
3,26 € tax excl.
TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...
€8.20
8,20 € tax excl.
Pedal doorstop with large rubber type art.244, 245, 246 suitable for locking doors and windows, max load 40 Kg
IBFM article 244-245-246
€2.70
2,70 € tax excl.
Recessed bolt to screw for railings, lever bolt for metal frames in galvanized steel
IBMF article 420
Front A
from 16mm - 20mm - 24mm
€7.38
7,38 € tax excl.
Linear striped handrail in medical PVC complete with fixing plates and screw-covering rings in ABS. Electrically insulated, the ribbed tube offers an excellent non-slip grip and is warm to the touch. It can be mounted...
€8.11
8,11 € tax excl.
Linear striped handrail in medical PVC complete with fixing plates and screw-covering rings in ABS. Electrically insulated, the ribbed tube offers an excellent non-slip grip and is warm to the touch. It can be mounted...
€5.74
5,74 € tax excl.
Small lock for mailboxes with 5 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes.
Opening...
€1.23
1,23 € tax excl.
Multi-angle 90 ° corner in plastic coated aluminum 21/0950 for Volpato plinth 20 / 20.400
Available height 100mm / 120mm / 150mm
€11.48
11,48 € tax excl.
FEATURES
Made of polymer compound
Suitable for contact with food
Excellent resistance to aging
Available colors: White - Gray
Measurements as shown in the images:
ROLL HEIGHT 60CM - ORDER BY THE METER
€19.67
19,67 € tax excl.
Pair of Hinge (the package contains 02 pcs.) with automatic simple action spring in steel, hinge used for door closers
IBFM article 102
Available sizes:
75mm
Door weight for max. 2 hinges 15 Kg
100mm...
€16.39
16,39 € tax excl.
Pedal doorstop heavy type with double spring, silver painted finish, max load 60 Kg
IBFM article 235
SUITABLE FOR HEAVY DOORS
€27.05
27,05 € tax excl.
Column base under Fridge Wind 60 cm with side support flap and removable support peg.
Complete with adjustable feet kit.
The kit includes: 1 underfridge base, 4 adjustable feet from 100 mm to 150 mm, 2 hooks for...
€36.89
36,89 € tax excl.
Base under Fridge Wind XL for 75 cm base column with side support flap and removable support peg.
Complete with adjustable feet.
The kit includes:
- 1 underfridge base
- 6 adjustable feet from 100 mm to 150 mm
-...
€24.51
24,51 € tax excl.
Plastic kitchen plinth with aluminum foil coating with coextruded gasket.
Total plinth length 4 meters
Cut in sections of 2.70 m + 1.29 m
Plinth height available 100 mm / 120 mm / 150 mm
Please note that...
€72.60
72,60 € tax excl.
Smooth aluminum plinth with semi-concealed gasket
Total plinth length 4 meters
Cut in sections of 2.70 m + 1.29 m
Plinth height available 100 mm / 120 mm / 150 mm
Please note that the cuts made are only to...
€50.00
50,00 € tax excl.
The technopolymer seat, with a non-slip finish, is perforated to allow the outflow of liquids and allows it to be used even in the shower; the anodized aluminum legs are telescopic and allow you to adjust the height...
€5.66
5,66 € tax excl.
IBFM roller stop for to and fro door in tropicalized steel article 208.
It can be used to stop any leaf.
Dimensions AxB:
16x100
25x120
€36.07
36,07 € tax excl.
TURBOMAX HSS is mainly designed for high performance drilling of metal sheets; guarantees excellent results even on any type of wood and plastic. Suitable for drilling stainless steel.
Plastic box of 5 pieces with...
€4.92
4,92 € tax excl.
Small brass or bronzed Cremonese mechanism closure for window only central closure type Mignon 9 mm entry
Article 172 IBFM
€34.43
34,43 € tax excl.
Max load: 2 hinges 150 Kg
Heavy Duty 3D Adjustment Hinge with Ball Bearings Fits Many Profiles. This hinge is suitable for heavy duty doors, security doors, entrance doors, fire and smoke doors.
The installation...
€49.10
49,10 € tax excl.
Article 489/E
Spring support wheel for swing gate
IBFM article 489/E
Capacity: 150 Kg
€36.89
36,89 € tax excl.
The technopolymer seat, with a non-slip finish, is perforated to allow the outflow of liquids and allows it to be used even in the shower; the anodized aluminum legs are telescopic and allow you to adjust the height...
€0.82
0,82 € tax excl.
Douille ou douille encastrée pour planchers à rebord
laiton ou nickelé
Article 474 de l'IBFM
Available measures:
A mm
6
8
10
12
14
16
18
20
22
B mm
14
18
20
22
25
28
30
32
32
C mm...
€2.87
2,87 € tax excl.
Universal key in zamak for control unit, panel, street cabinet and water/gas boxes.
Key for insert double bit 5 mm, square insert 6 - 8 mm and triangular insert 8,5 mm.
Measures looks image.
€27.87
27,87 € tax excl.
Small rectangular upstand 25x12 mm in aluminum for kitchen tops.
Rod length 4.20 meters
Cut in sections of 2.00 m + 2.19 m
Please note that the cuts made are only to facilitate the transport of the goods, we do...
€34.34
34,34 € tax excl.
Aluminum upstand for wave profile kitchen top
Rod length of 5.00 meters
Cut in sections of 2.50 m + 2.49 m
Please note that the cuts made are only to facilitate the transport of the goods, we do not make...
€18.44
18,44 € tax excl.
€2.57
2,57 € tax excl.
Volpato 81 / G1.3AT2 external end caps set for 80 / G1.3AL drawer horizontal groove profile
€2.38
2,38 € tax excl.
Volpato 81 / G1.3AT3 internal end caps set for 80 / G1.3AL drawer horizontal groove profile
€2.57
2,57 € tax excl.
Volpato 81 / G1.AT2 external end caps set for classic horizontal groove profile 80 / G1.2AL
€2.38
2,38 € tax excl.
Volpato 81 / G1.AT3 internal end caps set for classic horizontal groove profile 80 / G1.2AL
€2.46
2,46 € tax excl.
Accessory kit for upstand 50 / 62.420AL which includes
Internal corner
External corner
Right Cap
Left Cap
€5.74
5,74 € tax excl.
Volpato cutlery trays gray for drawer 30 cm 32/72.N30GR, plastic material, produced by injection molding or vacuum forming, eco-friendly, certified for food contact, resistant to scratches. Length 240 mm, depth 490...
€29.55
29,55 € tax excl.
Volpato cutlery trays gray for drawer 90 cm 32/72.N90GR, plastic material, produced by injection molding or vacuum forming, eco-friendly, certified for food contact, resistant to scratches. Length 840 mm, depth 490...
€3.02
3,02 € tax excl.
The set includes:
n. 2 fixing brackets cod. 85 / 05G01;
n. 4 zinc-plated screws (M4x4) cod. 85/07084;
n. 4 screws for chipboard ø3.5x12 cod. 39/07109;
n. 4 washers ø12x1 code 85/07502.
€13.93
13,93 € tax excl.
HOLZGLEITMITTEL is supplied in the format: 1 lt
In carpentry it is great to effectively reduce the friction of wood on work surfaces, especially particularly resinous woods.No way alters the subsequent painting, does...
€10.57
10,57 € tax excl.
50mm padlock with adjustable long arch.
Complete with 2 keys.
Measurements as shown in the images.
€2.46
2,46 € tax excl.
Accessory kit for upstand that includes
Internal corner
External corner
Right Cap
Left Cap
€24.59
24,59 € tax excl.
Closing coordinator for double leaf doors in black painted iron.
Measurements as shown in the images.
€18.49
18,49 € tax excl.
BINDAN-B4 One component is supplied in sizes: 600 g, 800 g, 5 kg, 10 kg, 25 kg, 150Kg.
Without fillers, resistant to water and mold. Bindan B4 reaches the B4 properties through precious resins, without the addition...
€22.55
22,55 € tax excl.
Hinges for heavy and fire doors with 2-wing bearing
to screw on doors
Max load: 2 hinges 80 Kg
€31.97
31,97 € tax excl.
Hinges for heavy and fire rated doors with 3-wing bearing
to screw on doors
Max load: 2 hinges 150 Kg
€35.98
35,98 € tax excl.
3-wing hinges for heavy and fire rated doors, round type with closing spring
Max load: 2 hinges 160 Kg
€4.92
4,92 € tax excl.
Lockable lever lock closure for cabinets or furniture doors, IBFM art. 153
Usable with 19 mm drilling
€5.74
5,74 € tax excl.
Small lock for mailboxes with 12 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes.
Opening...
€4.84
4,84 € tax excl.
Pedal doorstop with small rubber type art.242 or 243, suitable for locking doors and windows, max load 40 Kg
IBFM article 242-243
€7.79
7,79 € tax excl.
IBFM door closer spring in nickel-plated steel of 200 mm for doors and leaves in general, simple assembly, max load 40 Kg
Out-of-StockSold out
€4.10
4,10 € tax excl.
Out-of-StockSold out
€77.70
77,70 € tax excl.
Double vertical throat profile for columns in silver anodized aluminum Volpato 80 / G1.5AL
Bar length 4.70 m - Cut into sections of 2.70 mt + 1.99 mt
Other cuts on request
Out-of-StockSold out
€15.53
15,53 € tax excl.
Side pairs from under hood for the protection of wall units.
Width of the panel: 330 mm
Panel height: 200 mm
Side of the panel: 18 mm
Out-of-StockSold out
€783.93
783,93 € tax excl.
Protool saw raiper UniverS 1600W SSP200EB, 1600W, cable length 7.5 m, cutting depth 200 mm
Out-of-StockSold out
€88.70
88,70 € tax excl.
Shutter for furniture with hinged or sliding aluminum assembled frame, cut to size with a profile view of 1.2mm.
Finishing profile choice between:
Polished steel
Silver
matt titanium
Matt black
Matt White...
Out-of-StockSold out
€319.52
319,52 € tax excl.
Shutter H3000 mm x 900 mm for wardrobe sliding aluminum without transom assembled frame and coated with glass mirror panel.
Finishing profile : SILVER
Finish panel mirror glass (standard)
Realization shutter...
Out-of-StockSold out
€63.49
63,49 € tax excl.
Single vertical throat profile for columns in silver anodized aluminum Volpato 80 / G1.6AL
Bar length 4.70 m - Cut into sections of 2.70 m + 1.99 m
Please note that the cuts made are only to facilitate the...
Out-of-StockSold out
€28.69
28,69 € tax excl.
Triangular aluminum upstand for kitchen tops
Rod length of 4.00 meters
Cut in sections of 2.00 m + 1.99 m
Please note that the cuts made are only to facilitate the transport of the goods, we do not make precision...
Out-of-StockSold out
€38.15
38,15 € tax excl.
Volpato 80 / G1.2AL classic horizontal throat profile excluding mounting accessories
Bar length 4.20 m - Cut into sections of 2.20 m + 1.99 m
Please note that the cuts made are only to facilitate the transport of...
Out-of-StockSold out
€47.50
47,50 € tax excl.
Volpato 80 / G1.3AL horizontal groove profile for drawers in polished anodized aluminum, mounting accessories not included
Bar length 4.20 m - Cut into sections of 2.20 m + 1.99 m
Please note that the cuts made...
Out-of-StockSold out
€50.30
50,30 € tax excl.
Volpato 80 / G1.4AL horizontal groove profile for wall units in polished anodized aluminum, mounting accessories not included
Bar length 4.20 m - Cut into sections of 2.20 m + 1.99 m
Please note that the cuts...
Showing 1-90 of 93 item(s)
Italiano
Français
Deutsch
Español