Click for more products.
No produts were found.
Filter By
Filter By
Color or Finish
Misure H x L (mm)
Mobile body measurements
Length
Measure
Length
Packaging
Height
Weight
  • 0 kg - 15 kg

Brand
Brand

Home

€14.75
14,75 € tax excl.
2D screw-on hinge zinc die black powder coated; pin stainless steel. Door position: Hinges for flush doors Installation circumstances: Prominent hinge Hinge adjustable: Hinge adjustable 2D - 2D nut useable...
€0.54
0,54 € tax excl.
Pre-assembly base for Clip Top Hinge Cross pre-assembly plate with Euro screw Ø 6 mm. Distance: 0mm/3mm Material: Steel Surface: Nickel-plated Fixing: Euro screw, Distance between fixing positions: 32 mm -...
€8.11
8,11 € tax excl.
Black polyamide lock with lever-tab, 1/4 turn locking, nut fixing with flat gasket and self-tapping screw. 18 mm box lock complete with 3 levers (codes: 1000-5164, 1000-U26, 1000-26).
€0.82
0,82 € tax excl.
CHARACTERISTICS: Application: for fixing mobile parts Plastic housing with pre-assembled zinc eccentric Plastic connecting element Available colors: White and Brown Dimensions (height / width / depth):...
€57.38
57,38 € tax excl.
Blum AMBIA-LINE film holder, for drawer height M and height K from a nominal length of 450 mm. Double unit, transparent and aluminum film holder. Length 356 mm Width 200 mm
€24.51
24,51 € tax excl.
Blum AMBIA-LINE knife holder, for drawers with height M and height K from a nominal length of 450 mm Length 409 mm Width 187 mm, for 9 knives
€33.52
33,52 € tax excl.
Blum AMBIA-LINE plate holder, for drawer height C and height F Ø Plates 182 - 322 mm, Stack height up to 12 plates
€34.02
34,02 € tax excl.
Blum AMBIA-LINE spice rack, for drawer height C and height F Length 356 mm Width 200 mm
€12.30
12,30 € tax excl.
BLUM AVENTOS HK-XS Standard lift-and-turn door stay, 105° opening angle In case of hinges with a smaller opening angle, this is limited by the hinge EXTRA DISCOUNT FOR PACKAGES
€10.57
10,57 € tax excl.
BLUM AVENTOS HK-XS TIP-ON lift-and-turn door stay, 105° opening angle in case of hinges with a smaller opening angle, this is limited by the hinge EXTRA DISCOUNT FOR PACKAGES
€0.82
0,82 € tax excl.
CLIP pre-assembly plate, straight, 0 mm, Steel, for screwing on chipboard screws. Recommended standard pre-assembly plates for Aventos HK-XS The spacer depends on the upper gap
€7.38
7,38 € tax excl.
Clip Top hinge for furniture with column with integrated Blumotion Opening 95°  * Buy with pre-assembly base of 3 mm *
€0.76
0,76 € tax excl.
Blum support platelet starboard to screw, recessed Available in colors: SW (White Silk) PG (Platinum Grey) TS (Black Earth)
€3.40
3,40 € tax excl.
Piston recessed push-open doors for Ø 10 plastic.Available in short version, 50 mm and 76 mm long version and colors SW (Black Silk), PG (Platinum Grey), TS (black earth) EXTRA DISCOUNT FOR PACKAGING
€1.23
1,23 € tax excl.
10MA screw drilled internally to allow adjustment of the levelling foot from inside the cabinet, used for assembling the Camar 308 foot in various sizes. Size: 10MA, length 40mm Measurements as per pictures.
€40.98
40,98 € tax excl.
Compact concealed hinge for parallel doors BLUM 33, 110° opening Blum, nickel-plated finish. 35 mm hole Automatic closing (spring) Hole depth 1.27 cm Hole distance (distance from the edge of the hole from 35 mm...
€0.16
0,16 € tax excl.
Color/surface: R7036 platinum gray Type of fastening: in the support plate Mounting plate shape: cross Type of fixing: To screw Distance between front side corner and first pos. fixing: 37 mm Material: Plastic
€295.08
295,08 € tax excl.
Manual vertical drilling device for Blum hinges. Operated with a hand drill. Ensures fast, precise, and error-free drilling. Ideal jig for carpenters, craftsmen, and industry professionals. Features: Side blocks...
€8.93
8,93 € tax excl.
FEATURES: Material: Plastic Color/surface: RAL 7035 light gray Nominal voltage: 24 Type of voltage: Continuous voltage Cable section: 1.5 Connection of electric current: Piercing (metal tips) Only for freezers...
€7.38
7,38 € tax excl.
Black EPDM gasket (EPDM 65 ° ± 5 Shore A) material: foam rubber EPDM; clamping profile EPDM 65° ± 5 Shore A Surface and colour: black Seal balloon / seal body: Yes Position sealing element: top Product type:...
€17.21
17,21 € tax excl.
Snap lock in galvanized steel, tongue and square in rough zamak, spring in galvanized steel.Door version: right, leftType of blocking system: block-blockmaterial: steelSurface and color: galvanizedInstallation...
€8.03
8,03 € tax excl.
120° hinge for screw-on fastening for 20 mm door return. Door position: Hinges for prominent doors Arrangement of cabinets: Hinge for single cabinets Installation circumstances: Concealed hinge Opening angle:...
€16.31
16,31 € tax excl.
Ashtray to be fixed to the outside wall of offices, institutions and businesses to avoid the dirt of cigarette butts on the ground.The special joint allows, with a simple movement, to empty the cup leaving your hands...
€1.23
1,23 € tax excl.
Color/surface: Nickel plated Opening angle: 100° Elbow bending: Stop with overlap Bottom fixing: pressure Case back material: Steel Closing mechanism: with spring Side adjustment: +/- 2 mm Depth adjustment:...
€11.48
11,48 € tax excl.
Color/surface: Nickel plated Opening angle: 100° Elbow bending: Stop with overlap Bottom fixing: pressure Case back material: Steel Closing mechanism: with spring Side adjustment: +/- 2 mm Depth adjustment:...
€1.23
1,23 € tax excl.
Color/surface: Nickel plated Opening angle: 107° Elbow bend: Stop with overlap Back fixing: EXPANDO Case back material: Steel Closing mechanism: with spring Lateral adjustment: +/- 2 mm Depth adjustment:...
€12.30
12,30 € tax excl.
Color/surface: Nickel plated Opening angle: 107° Elbow bend: Stop with overlap Back fixing: EXPANDO Case back material: Steel Closing mechanism: with spring Lateral adjustment: +/- 2 mm Depth adjustment:...
€4.10
4,10 € tax excl.
COMPACT hinge 1-3/8" or more, nickel-plated, 107° opening angle with spring, screw-on mounting plate and cup. Supplied accessories: Premounted 138F0100.22 pre-assembly plate
€4.10
4,10 € tax excl.
Color/surface: Nickel plated Opening angle: 125° Hinge for thick doors and for doors with profiles Three-dimensional adjustment of the front Assembly and disassembly of the door on/from the cabinet without tools
€27.05
27,05 € tax excl.
Color/surface: Nickel plated Opening angle: 125° Hinge for thick doors and for doors with profiles Three-dimensional adjustment of the front Assembly and disassembly of the door on/from the cabinet without tools
€4.10
4,10 € tax excl.
Color/surface: Nickel plated Opening angle: 170° Elbow bending: Stop with overlap Bottom fixing: pressure Case back material: Steel Closing mechanism: with spring Lateral adjustment: +/- 2 mm Depth...
€20.49
20,49 € tax excl.
Color/surface: Nickel plated Opening angle: 170° Elbow bending: Stop with overlap Bottom fixing: pressure Case back material: Steel Closing mechanism: with spring Lateral adjustment: +/- 2 mm Depth...
€3.69
3,69 € tax excl.
Color/surface: Nickel plated Opening angle: 95° Clip top without self-timer (spring) Cabinet hinge with flush column Three-dimensional adjustment of the front Assembly and disassembly of the door on/from the...
€22.13
22,13 € tax excl.
Color/surface: Nickel plated Opening angle: 95° Clip top without self-timer (spring) Cabinet hinge with flush column Three-dimensional adjustment of the front Assembly and disassembly of the door on/from the...
€11.31
11,31 € tax excl.
Hinge for 8–14 mm doors The EXPANDO T fastening system for a wide variety of materials CLIP top BLUMOTION with integrated BLUMOTION (with deactivation) CLIP top with automatic closing (spring) Protrusion 0...
€0.12
0,12 € tax excl.
Joint screw with cylindrical head with slot.Features:Head diameter 8 mmMaterial zincColor/finish glossyCylindrical head with slotTotal length (incl. head) 26 mmThread length 20.5 mmThread for chipboard screw, thread...
Showing 1-90 of 195 item(s)

Settings

Menu

Create a free account to use wishlists.

Sign in