Click for more products.
No produts were found.
0
Home
Filter By
Filter By
Color or Finish
Cut
Diameter
Measure
Entrance
Weight

  • 0.06 kg - 8.7 kg

Brand
Brand

Home

Filter By
Brand: CMT Orange Tools Brand: Colcom Group Brand: InSinkErator Brand: Irwin Tools Brand: Prefer Brand: Protool Brand: Reflexx Brand: System Holz Clear all
CMT Tools DAF-001 Digital angle finger CMT Tools DAF-001 Digital angle finger

CMT Tools DAF-001 Digital angle finger

€48.36
48,36 € tax excl.
LCD display, when the arm is extended the angle it makes with the base is indicated clearly on digital read-out to the nearest 0,05°. The measuring range is 0 - 360°. The vials allow variations from the vertical and...
Food waste disposer Model 45 InSinkErator - Garbage disposal Food waste disposer Model 45 InSinkErator - Garbage disposal

Food waste disposer Model 45 InSinkErator - Garbage disposal

€192.62
192,62 € tax excl.
Model 45 disposer with single-stage grinding technology and 0.5 HP motor. Food scraps are ground and discarded in seconds. Clean, hygienic, practical, and easy to use. Easy to install, it can be placed in most sinks....
Guide bearing for 12,7x5x4,76 mm CMT cutter Guide bearing for 12,7x5x4,76 mm CMT cutter

Guide bearing for 12,7x5x4,76 mm CMT cutter

€5.25
5,25 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.003.00 Specifications: D - 12,7 mm diameter P - Thickness 5 mm B - Hole Ø 4,76 mm
Guide bearing for 16x5x5mm CMT cutter Guide bearing for 16x5x5mm CMT cutter

Guide bearing for 16x5x5mm CMT cutter

€4.10
4,10 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.006.00 Specifications: D - 16mm diameter P - Thickness 5 mm B - Hole Ø 5 mm
Guide bearing for 19x7x6,35 mm CMT cutter Guide bearing for 19x7x6,35 mm CMT cutter

Guide bearing for 19x7x6,35 mm CMT cutter

€4.92
4,92 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.004.00 Specifications: D - 19 mm diameter P - Thickness 7 mm B - Hole Ø 6,35 mm
Guide bearing for 22x7x8 mm CMT cutter Guide bearing for 22x7x8 mm CMT cutter

Guide bearing for 22x7x8 mm CMT cutter

€5.33
5,33 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.005.00 Specifications: D - 22 mm diameter P - Thickness 7 mm B - Hole Ø 8 mm
Guide bearing for 9,5x3,2x4,76 mm CMT cutter Guide bearing for 9,5x3,2x4,76 mm CMT cutter

Guide bearing for 9,5x3,2x4,76 mm CMT cutter

€5.90
5,90 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.002.00 Specifications: D - 9,5 mm diameter P - Thickness 3,2 mm B - Hole Ø 4,76 mm
Guide rail GRP 800/2, 638188 length 800 mm Protool Guide rail GRP 800/2, 638188 length 800 mm Protool

Guide rail GRP 800/2, 638188 length 800 mm Protool

€79.26
79,26 € tax excl.
Guide Rail 800 mm for plunge saws, Circular Saws, Jigsaws and Routers. Safe and straight guidance of the machine Protects the workpiece surface from damage Coating for smooth machine movement
Prefer 4451.0510 lock for hinged door Prefer 4451.0510 lock for hinged door

Hinged door lock 4451.0510 Prefer

€28.69
28,69 € tax excl.
Rotation 360° left - 2 extractions.Polished chrome plated brass cylinder with pins. Screw fixing.2 keys.Dimensions as per pictures. (L= 8 mm)
Prefer 4451.0510 lock for hinged door Prefer 4451.0510 lock for hinged door

Hinged door lock 4482.2210 Prefer

€30.30
30,30 € tax excl.
180° rotation - 2 pull-outs. Polished chrome plated brass cylinder with pins. Screw fixing. 2 keys. Dimensions as per pictures. (L= 19 mm)
Prefer 4451.0510 lock for hinged door Prefer 4451.0510 lock for hinged door

Hinged door lock 4482.4210 Prefer

€31.21
31,21 € tax excl.
180° rotation - 2 pull-outs. Polished chrome plated brass cylinder with pins. Screw fixing. 2 keys. Dimensions as per pictures. (L= 30 mm)
Inline door hinge SH System Holz Series 370 Inline door hinge SH System Holz Series 370

Inline door hinge SH System Holz Series 370

€4.10
4,10 € tax excl.
SH System Holz Series 370 brand hinge, for inline doors of furniture and kitchens.Hole on door mm. 35. Depth of the metal box 11 mm. Opening 90°. Adaptable to all traditional 370 Series bases and to all Domi...
Irwin TCT cylindrical drill bits metal drilling Irwin TCT cylindrical drill bits metal drilling

Irwin TCT cylindrical drill bits metal drilling

€10.88
10,88 € tax excl.
TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure. Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...
Irwin TURBOMAX HSS multifunction drill bits metal drilling Irwin TURBOMAX HSS multifunction drill bits metal drilling

Irwin TURBOMAX HSS multifunction drill bits metal drilling

€3.26
3,26 € tax excl.
TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...
Kit handle for glass sliding door Colcom B93 Kit handle for glass sliding door Colcom B93

Kit handle for glass sliding door Colcom B93

€75.00
75,00 € tax excl.
Kit rectangular handle for glass sliding door, made of aluminium. With its linear and squared shapes, it perfectly fits various types of interior doors. Finish: Matt chrome Features: Glass thickness 8 - 10 mm...
Kit plate and handles 0433.0800 for Overhead door Prefer Kit plate and handles 0433.0800 for Overhead door Prefer

Kit plate and handles 0433.0800 for Overhead door Prefer

€14.75
14,75 € tax excl.
Features: Black plastic material For locks with shaped cylinder Wheelbase(A) 60 mm Handle height(B) 106 mm Distance between fixing holes(C) 44 mm Distance between fixing holes(H) 144 mm Measures looks image.
Prefer 6014.0010 lock for window rolling shutter Prefer 6014.0010 lock for window rolling shutter

Lock for rolling shutter 6014.0010 Prefer

€20.49
20,49 € tax excl.
Application: on roller shutter blade. Operation: rack and pinion, movement with knob from inside. Finish: galvanised box. Accessories: on request, fixing plate code 0450.0000.0000 - 0450.0040.0000 0450.0050.0000...
Mina graphite 6 pcs for PCL-3 CMT Tools Mina graphite 6 pcs for PCL-3 CMT Tools

Mina graphite 6 pcs for PCL-3 CMT Tools

€4.34
4,34 € tax excl.
PCL-3B GRAPHITE MINE IDEAL FOR: Paper, Wood, Laminates, Building Material, Artificial Stones and Stones, Metals and Non-Ferrous Metals.
Mina graphite and pastel 6 pcs for PCL-3 CMT Tools Mina graphite and pastel 6 pcs for PCL-3 CMT Tools

Mina graphite and pastel 6 pcs for PCL-3 CMT Tools

€5.33
5,33 € tax excl.
PCL-3C GRAPHITE AND PASTEL MINE 2 pcs Graphite - 2 pcs Yellow - 2 pcs Red   IDEAL FOR: Plastic Materials, Ceramic Materials, Glass, Paper, Wood, Laminates, Building Materials, Artificial Stones and Stones, Metals...
Prefer 4451.0510 lock for hinged door Prefer 4451.0510 lock for hinged door

Overhead door lock B551.0810 Prefer

€26.38
26,38 € tax excl.
Application: 1 lock top side Function: For B551-W551 from inside and outside opening with handle, unlocking from outside with key, from inside with lever Finish: normal cylinder brass, lock zinc plated Cylinder Ø...
Prefer B551.0810 locks for overhead garage doors with round cylinder Prefer B551.0810 locks for overhead garage doors with round cylinder

Overhead door lock set B551 + 5520 transit door Prefer

€71.31
71,31 € tax excl.
Application: on up-and-over doors, with transit doors Operation: from inside and outside opening with handle, unlocking from outside with key, from inside with lever Finish: normal brass cylinder, galvanised lock...
Prefer W551.0822 locks for overhead garage doors Prefer W551.0822 locks for overhead garage doors

Overhead door lock W551.0822 Prefer

€29.51
29,51 € tax excl.
Application: 1 lock top side Function: For B551-W551 from inside and outside opening with handle, unlocking from outside with key, from inside with lever Finish: security cylinder sandblasted and nickel-plated,...
Prefer 6751.0802 mortise lock for metal door Prefer 6751.0802 mortise lock for metal door

Prefer 6751.0802 mortise lock for metal door

€30.86
30,86 € tax excl.
Application: for metal transit doors. Operation: handle -operated spring latch, locks from inside and outside with key. Finish: brass cylinder, galvanized case. Square spring latch (2 keys supplied), B= 7 mm...
Prefer 6752.0802 mortise lock for metal door Prefer 6752.0802 mortise lock for metal door

Prefer 6752.0802 mortise lock for metal door

€30.86
30,86 € tax excl.
Application: for metal transit doors. Operation: handle -operated spring latch, locks from inside and outside with key. Finish: brass cylinder, galvanized case. Square spring latch (2 keys supplied), B= 7 mm...
Prefer 6753.0804 mortise lock for metal door Prefer 6753.0804 mortise lock for metal door

Prefer 6753.0804 mortise lock for metal door

€36.68
36,68 € tax excl.
Application: for metal transit doors. Operation: handle -operated spring latch, locks from inside and outside with key. Finish: brass cylinder, galvanized case. Round spring latch (2 keys supplied), B= 11 mm...
Prefer 6754.0804 mortise lock for metal door Prefer 6754.0804 mortise lock for metal door

Prefer 6754.0804 mortise lock for metal door

€33.40
33,40 € tax excl.
Application: for metal transit doors. Operation: handle -operated spring latch, locks from inside and outside with key. Finish: brass cylinder, galvanized case. Round spring latch (2 keys supplied), B= 11 mm...
Serratura per ante a battente Prefer Serratura per ante a battente Prefer

Prefer lock for drawers

€18.00
18,00 € tax excl.
Prefer lock for drawers, rotation 360 ° right - 2 extractionsExternal body white nylon, fixing screw
Serratura per ante a battente Prefer Serratura per ante a battente Prefer

Prefer lock for drawers

€18.00
18,00 € tax excl.
Prefer lock for drawers, rotation 360 ° right - 2 extraction - compass 180 ° rotation Cylinder brass pins, body white nylon
Serratura per ante a battente Prefer Serratura per ante a battente Prefer

Prefer lock for drawers

€18.00
18,00 € tax excl.
Prefer lock for drawers, rotation 360 ° right - 2 extraction - compass 180 ° rotation Cylinder brass pins, body white nylon
Premium Plus 700 SR Food Waste Disposer – InSinkErator Premium Plus 700 SR Food Waste Disposer – InSinkErator

Premium Plus 700 SR Food Waste Disposer – InSinkErator

€647.54
647,54 € tax excl.
Compact, quiet, and powerful: the Premium Plus 700 SR food waste disposer reduces your household waste to particles, disposing of it conveniently and hygienically. Easy installation thanks to Lift & Latch...
Prefer 6012.0010 lock for window rolling shutter Prefer 6012.0010 lock for window rolling shutter

Roller shutter lock 6012.0010 Prefer

€30.15
30,15 € tax excl.
Application: on roller shutter blade. Operation: by rack, movement both from outside and inside with key. Finish: brass cylinder, galvanised box. Accessories: on request, fixing plate code 0430.0000.0000 -...
Set 5 cylindrical drill bits for metal TURBO MAX Irwin Set 5 cylindrical drill bits for metal TURBO MAX Irwin

Set 5 cylindrical drill bits for metal TURBO MAX Irwin

€36.07
36,07 € tax excl.
TURBOMAX HSS is mainly designed for high performance drilling of metal sheets; guarantees excellent results even on any type of wood and plastic. Suitable for drilling stainless steel. Plastic box of 5 pieces with...
Set rabbet with 15 bearings 935.503.11 shank 12 mm CMT Set rabbet with 15 bearings 935.503.11 shank 12 mm CMT

Set rabbet with 15 bearings 935.503.11 shank 12 mm CMT

€139.34
139,34 € tax excl.
The complete kit (item code 835-935.503.11), will enable you to produce 17 different rabbet sizes including rabbets for under-sized plywood applications. For rabbet sizes over 12,7mm (1/2”), make the cuts in several...
Prefer 2300.3230 lock for sliding door Prefer 2300.3230 lock for sliding door

Sliding door lock 2300.3230 Prefer

€16.39
16,39 € tax excl.
Rotation 90° - push-button operated. Pin cylinder. Black ABS cylinder body. Fork fixing. 2 keys. Dimensions as per pictures. 
Sliding door lock 4281.0010 Prefer Sliding door lock 4281.0010 Prefer

Sliding door lock 4281.0010 Prefer

€25.00
25,00 € tax excl.
360° rotation - 2 pull-outs, open box. Polished chrome plated brass cylinder, with pins. Screw or solder plate fixing. 2 keys. Finish: galvanised box. Dimensions as per pictures. (L= 8 mm)
Prefer 4282.0010 lock for sliding door Prefer 4282.0010 lock for sliding door

Sliding door lock 4282.0010 Prefer

€25.00
25,00 € tax excl.
360° rotation - 2 pull-outs, open box. Polished chrome plated brass cylinder, with pins. Screw or solder plate fixing. 2 keys. Finish: galvanised box. Dimensions as per pictures. (L= 8 mm)
Slot cutter set 923.001.11 8 mm shank CMT Slot cutter set 923.001.11 8 mm shank CMT

Slot cutter set 923.001.11 8 mm shank CMT

€188.52
188,52 € tax excl.
This versatile disc cutter set allows you to create decorative effects or functional joints. By varying the combination of disc cutters you can produce channels, steps, tongues and grooves, wood biscuit joints and...
Special Corner Hinge SH System Holz Series 370 Special Corner Hinge SH System Holz Series 370

Special Corner Hinge SH System Holz Series 370

€8.20
8,20 € tax excl.
Special Corner Hinge SH System Holz Series 370 for cabinet and kitchen doors. The System Holz hinge item 379910/2C is a special hinge for corner cabinets with two doors, designed for synchronized movement and wide...
System Holz Series 600 Office single hinge Ø 35 mm System Holz Series 600 Office single hinge Ø 35 mm

System Holz Series 600 Office single hinge Ø 35 mm

€20.49
20,49 € tax excl.
Office Single hinge series line, slide on fixing, 2D adjustment. Wooden or glass door application, for single , opening angle from 180 to 240°. Also for medical furniture items: 63001D/R5 (double hinge), 63101S/R5...
Guide bearing for 19x6x6 mm CMT cutter Guide bearing for 19x6x6 mm CMT cutter

Guide bearing for 19x6x6 mm CMT cutter

€5.33
5,33 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.007.00 Specifications: D - 19 mm diameter P - Thickness 6 mm B - Hole Ø 6 mm
MARKER FOR ARTISANS & PROFESSIONALS PCL-3 CMT Tools MARKER FOR ARTISANS & PROFESSIONALS PCL-3 CMT Tools

MARKER FOR ARTISANS & PROFESSIONALS PCL-3 CMT Tools

€9.75
9,75 € tax excl.
PCL-3 MECHANICAL MARKER FOR DEEP HOLES - Tip length 45mm (Ø5.7mm), to be able to mark hard to reach places. - Button for automatic lead advance with integrated lead sharpener. - Rechargeable front or rear with...
Load More Products
Showing 1-90 of 102 item(s)

Settings

Click for more products.
No produts were found.

Menu

Please sign in first.

Sign in

Create a free account to use wishlists.

Sign in