€12.30
12,30 € tax excl.
Adjustable click arm for wasistas window with outward opening
tropicalized steel finish
Filter By
Filter By
Home
Filter By
€4.84
4,84 € tax excl.
Small brass-plated adjustable cremone bolt mechanism from window only central locking lever
article 173 IBFM
€10.66
10,66 € tax excl.
Adjustable click arm for wasistas window with internal opening
tropicalized steel finish
€4.51
4,51 € tax excl.
CHARACTERISTICS:
Maximum recommended load: 300 kg
Lifting load: 150 kg
Adjustment: 0-25mm
Diameter: Ø 14 mm
Available sizes ( A ): 70 - 120 mm
Requires hex key #4 and screwdriver
Article tested by LGA
ABS,...
€1.57
1,57 € tax excl.
Plastic foot for kitchen furniture, with adjustable height minus 5 mm plus 20 mm
with mounting support and integrated base for adjustment.
Heights available from 10 - 12 - 15 cm
€4.10
4,10 € tax excl.
Spacer / spacer diameter 35 mm for grates adjustable from 30 to 40 mm, in galvanized iron, with hole of 14.5 mm
IBFM article 877
€0.90
0,90 € tax excl.
Adjustable spacer for assembling iron frames article 878, in galvanized steel + Threaded bushing article 878 / A
IBFM article 878 + 878 / A
€12.30
12,30 € tax excl.
Horizontal round small bolt in black painted aluminum with staple and with exposed fixing screws, and digital combination locking system. To be used in order to lock drawers, cabinets, openings or door leaves....
€65.49
65,49 € tax excl.
Amortized wheel with adjustable support for swing gates, easy overlapping type assembly.
IBFM article 489
Capacity: 170 Kg
€6.07
6,07 € tax excl.
Double action bolt or bolt in galvanized steel for metal frames for shutters and protected windows, single lever to close the two ways with M8 pitch
IBMF article 422
€1.48
1,48 € tax excl.
Suitable for closing floor lock rods, with protective lock article 475 IBFM
Measure = A
A - internal hole diameter
B - flange width
C - well outside diameter
A mm
6
8
10
12
14
16
18
20
22...
€2.13
2,13 € tax excl.
CHARACTERISTICS:
Maximum recommended load: 400 kg
Adjustment: 0-20mm
Requires hex key no. 6 and special key
Article tested by CTBA
ABS and zama components
Measurements as per pictures.
€1.23
1,23 € tax excl.
10MA screw drilled internally to allow adjustment of the levelling foot from inside the cabinet,
used for assembling the Camar 308 foot in various sizes.
Size: 10MA, length 40mm
Measurements as per pictures.
€1.64
1,64 € tax excl.
CAMAR 809 galvanized iron key for adjusting the 308 series leveling foot for furniture
size: length 200mm, width 80mm, 6mm hexagon
Measurements as per pictures.
€114.75
114,75 € tax excl.
Complete kit for opening a window:
- Crank control
- Actuator
- Cable
- Sheath
- Fixing saddle and accessories
- Standard cable and sheath length m.3
For window drives on Wasistas always apply a safety arm.
€48.36
48,36 € tax excl.
LCD display, when the arm is extended the angle it makes with the base is indicated clearly on digital read-out to the nearest 0,05°. The measuring range is 0 - 360°. The vials allow variations from the vertical and...
€2.05
2,05 € tax excl.
Features:
Recommended maximum load 200 Kg
Adjustment range 0–10 mm
Requires hex adjustment key n°6 or special adjustment key
Item tested by CTBA
Measures looks image.
€21.31
21,31 € tax excl.
Black painted zamak cremone handle with key, internal rod application for iron window.
Key lock for window or frame locking.
Available (R) Right - (L) Left.
Measures looks image.
€12.30
12,30 € tax excl.
Cremonese locking mechanism for windows with full 180 ° turn,
brass finish,
article 169 IBFM
€14.75
14,75 € tax excl.
Couple of hinges (the package contains 02 pcs) with automatic double action spring in steel, for Saloon type doors
Available sizes: 75 mm - 100 mm - 150 mm
Finishes available
Black painted steel
Nickel...
€3.28
3,28 € tax excl.
Duracell Plus alkaline battery for use in electronic devices that require reliable power
- Model 6LR61
- Voltage 9 Volts
- Type 9V (Transistor)
€154.92
154,92 € tax excl.
Tempered glass heating table with stainless steel base.
Lightweight and easy to assemble
1 power regulation
Protection against overheating
IP55 water resistant
Weight 12 kg
Power 1500 W
Dimensions: 40x40x75 cm
€5.25
5,25 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.003.00
Specifications:
D - 12,7 mm diameter
P - Thickness 5 mm
B - Hole Ø 4,76 mm
€4.10
4,10 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.006.00
Specifications:
D - 16mm diameter
P - Thickness 5 mm
B - Hole Ø 5 mm
€4.92
4,92 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.004.00
Specifications:
D - 19 mm diameter
P - Thickness 7 mm
B - Hole Ø 6,35 mm
€5.33
5,33 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.005.00
Specifications:
D - 22 mm diameter
P - Thickness 7 mm
B - Hole Ø 8 mm
€5.90
5,90 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.002.00
Specifications:
D - 9,5 mm diameter
P - Thickness 3,2 mm
B - Hole Ø 4,76 mm
€79.26
79,26 € tax excl.
Guide Rail 800 mm for plunge saws, Circular Saws, Jigsaws and Routers.
Safe and straight guidance of the machine
Protects the workpiece surface from damage
Coating for smooth machine movement
€39.93
39,93 € tax excl.
3-wing hinges for heavy and fire rated doors with screwed lid and closing spring. To obtain a greater load capacity it is possible to use more than one pair of hinges, just paying attention to their vertical spacing....
€53.28
53,28 € tax excl.
Hinges for heavy fire rated doors with 3 wings with screwed lid and closing spring
Max load: 2 hinges 150 Kg
€13.03
13,03 € tax excl.
IBFM Free-Occupied Deadbolt art. 37 for bathroom emergency opening, nickel-plated steel
Used in the lever closure of bathroom doors of rooms or trains
€2.38
2,38 € tax excl.
FEATURES:
Adjustment: less 5 mm -20 mm
Diameter: Ø 28 mm
Available heights (H): 10 - 12 - 15 cm
Adjustment can both internally and externally
Components ABS and steel
Measures looks image.
€3.34
3,34 € tax excl.
CORDLESS MULTI FOR ROTARY DRILLING ONLY - NO HAMMER/PERCUSSION drill bits are ideal for drilling the most common materials, including: brickwork, breeze block, wood, dry wall, slate, plastics, sheet metal. Unique...
€31.97
31,97 € tax excl.
DIAMOND - COOL WATER - NO PERCUSSION for fast, smooth cutting in all grades of hard and soft tiles.
Drilling with water increases the lifespan of the tool. Do not press strongly on the tool, let it work. Make a...
€5.39
5,39 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite. Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill bits....
€18.20
18,20 € tax excl.
CORDLESS MULTI is able of drilling wide selection of materials: brick, marble, metal, tile, slate, gypsum, limestone, hard plastic, wood, cast iron and hardened steel.Plastic box of 5 pieces with bits 4 - 5 - 6 - 8 -...
€25.33
25,33 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite.Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill...
€9.20
9,20 € tax excl.
BLUE GROOVE 4X Four times faster than the basic flat drill bits double Cutting Spurs scribe outside of the hole, reducing breakout.
Thicker Cutting Edge for longer drilling life. Bluegroove Point & Cutting Edge...
€10.88
10,88 € tax excl.
TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure.
Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...
€3.26
3,26 € tax excl.
TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...
€299.18
299,18 € tax excl.
Deluxe conversion kit from barbecue to pizza oven.
For charcoal grills 47 cm, 56 cm and 57 cm
KettlePizza stainless steel insert
It's assembled and installed in a few minutes and without tools
Aluminum pizza...
€31.97
31,97 € tax excl.
Easy to assemble
Composed of 8 panels
They can be mounted linearly or surmounted
The planter is multi-shaped
The size is ideal for creating a small vegetable garden
Perimeter: 4.60 mt
Panel Dimensions: 58x2xh14...
€8.20
8,20 € tax excl.
Pedal doorstop with large rubber type art.244, 245, 246 suitable for locking doors and windows, max load 40 Kg
IBFM article 244-245-246
€1.97
1,97 € tax excl.
FEATURES:
Nominal loading capacity: 400 kg
Adjustment: 0-20 mm
Available heights (H): 4 - 5 - 6 - 8 - 10 cm
Necessary special key for adjustment
One-piece steel tube and socket
Article tested by CTBA...
€2.70
2,70 € tax excl.
Recessed bolt to screw for railings, lever bolt for metal frames in galvanized steel
IBMF article 420
Front A
from 16mm - 20mm - 24mm
€5.74
5,74 € tax excl.
Small lock for mailboxes with 5 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes.
Opening...
€4.34
4,34 € tax excl.
PCL-3B GRAPHITE MINE
IDEAL FOR: Paper, Wood, Laminates, Building Material, Artificial Stones and Stones, Metals and Non-Ferrous Metals.
€5.33
5,33 € tax excl.
PCL-3C GRAPHITE AND PASTEL MINE
2 pcs Graphite - 2 pcs Yellow - 2 pcs Red
IDEAL FOR: Plastic Materials, Ceramic Materials, Glass, Paper, Wood, Laminates, Building Materials, Artificial Stones and Stones, Metals...
€3.28
3,28 € tax excl.
Duracell Plus alkaline batteries for use in electronic devices that require reliable power
- Model LR14
- Voltage 1.5 Volt
- Type C (Half Torch)
€3.28
3,28 € tax excl.
Duracell Plus alkaline batteries for use in electronic devices that require reliable power
- Model LR20
- Voltage 1.5 Volt
- Type D (Torch)
€100.00
100,00 € tax excl.
Pack of 4 pieces Articuled legs for table, comprising screws, plates and hex wrench.Color stem embossed gray - color terminal stem frosted dark gray.
DIMENSIONS:
Leg height: 700 mm
Leg diameter: Ø 50 mm...
€81.15
81,15 € tax excl.
Pack of 4 Folding table leg, painted aluminium.
Efficiency in 3 steps thanks to the safety lock that gives maximum stability in the support phase and with a simple click and a fluid movement without effort, the leg...
€3.28
3,28 € tax excl.
Duracell Plus alkaline batteries for use in electronic devices that require reliable power
- Model LR6
- Voltage 1.5 Volt
- Type AA
€3.28
3,28 € tax excl.
Duracell Plus alkaline batteries for use in electronic devices that require reliable power
- Model LR03
- Voltage 1.5 Volt
- Type AAA(Micro)
€2.46
2,46 € tax excl.
Pair of adjustable hanging supports (1 right / 1 left) for furniture, available colors White and Brown.
FEATURES:
Nominal loading capacity: 70 kg
Horizontal adjustment: 25 mm
Maximum vertical adjustment: 25 mm...
€19.67
19,67 € tax excl.
Pair of Hinge (the package contains 02 pcs.) with automatic simple action spring in steel, hinge used for door closers
IBFM article 102
Available sizes:
75mm
Door weight for max. 2 hinges 15 Kg
100mm...
€16.39
16,39 € tax excl.
Pedal doorstop heavy type with double spring, silver painted finish, max load 60 Kg
IBFM article 235
SUITABLE FOR HEAVY DOORS
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 16 mm diameter
L - Length 45mm
d - Hole Ø 13 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 12mm diameter
L - Length 25mm
d - Hole Ø 6 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 8mm diameter
L - Length 25mm
d - Hole Ø 6 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 12mm diameter
L - Length 25mm
d - Hole Ø 8 mm
€5.66
5,66 € tax excl.
IBFM roller stop for to and fro door in tropicalized steel article 208.
It can be used to stop any leaf.
Dimensions AxB:
16x100
25x120
€65.57
65,57 € tax excl.
The Set contains:
552-705 Ø 5mm (3/16 ")
552-706 Ø 6mm (1/4 ")
552-708 Ø 8mm (5/16 ")
552-712 Ø 12mm (1/2 ")
552-GUIDE
552-EX14 - HEXAGONAL ADAPTER FOR DRILL BIT
€36.07
36,07 € tax excl.
TURBOMAX HSS is mainly designed for high performance drilling of metal sheets; guarantees excellent results even on any type of wood and plastic. Suitable for drilling stainless steel.
Plastic box of 5 pieces with...
€531.97
531,97 € tax excl.
Set AC52F Manual edge bander 1500W Virutex AG98F with edge trimmer and head cutter.
For the application of pre-glued edges in PVC, melamine, wood. It works both on the top and on the shaped or curved. The special...
€286.89
286,89 € tax excl.
This set of 3 multifunctional cutters for making entrance and passage doors. Working in conjunction with the tongue and groove cutters, the set allows you to produce reinforced tenons up to 27mm in length with minimal...
€139.34
139,34 € tax excl.
The complete kit (item code 835-935.503.11), will enable you to produce 17 different rabbet sizes including rabbets for under-sized plywood applications.
For rabbet sizes over 12,7mm (1/2”), make the cuts in several...
€2.05
2,05 € tax excl.
FEATURES:
Nominal loading capacity: 150 kg
Adjustment: 0-20 mm
Necessary allen key n.6 and special key for adjustment
Article tested by CTBA
Components ABS, steel and zamak
Measures looks image.
€188.52
188,52 € tax excl.
This versatile disc cutter set allows you to create decorative effects or functional joints. By varying the combination of disc cutters you can produce channels, steps, tongues and grooves, wood biscuit joints and...
€4.92
4,92 € tax excl.
Small brass or bronzed Cremonese mechanism closure for window only central closure type Mignon 9 mm entry
Article 172 IBFM
€34.43
34,43 € tax excl.
Max load: 2 hinges 150 Kg
Heavy Duty 3D Adjustment Hinge with Ball Bearings Fits Many Profiles. This hinge is suitable for heavy duty doors, security doors, entrance doors, fire and smoke doors.
The installation...
€7.79
7,79 € tax excl.
IBFM door closer spring in nickel-plated steel of 200 mm for doors and leaves in general, simple assembly, max load 40 Kg
€49.10
49,10 € tax excl.
Article 489/E
Spring support wheel for swing gate
IBFM article 489/E
Capacity: 150 Kg
€0.82
0,82 € tax excl.
Douille ou douille encastrée pour planchers à rebord
laiton ou nickelé
Article 474 de l'IBFM
Available measures:
A mm
6
8
10
12
14
16
18
20
22
B mm
14
18
20
22
25
28
30
32
32
C mm...
€900.82
900,82 € tax excl.
Tilting saw 1500W with Virutex TM33W laser
With top table of great precision and power. Equipped with a 300 mm diameter professional blade in 48-tooth carbide, it offers the professional an exceptional cutting...
€2.87
2,87 € tax excl.
Universal key in zamak for control unit, panel, street cabinet and water/gas boxes.
Key for insert double bit 5 mm, square insert 6 - 8 mm and triangular insert 8,5 mm.
Measures looks image.
€232.79
232,79 € tax excl.
Virutex SPR770T Clamping support with wheels
Allowing just one person to hold and carry all kind of panels, heavy doors, carpentry parts in wood, aluminum, PVC, etc. Clamp opening from 6 to 110 mm, both are protected...
€18.03
18,03 € tax excl.
Adjustable visible square foot item 555R104 for furniture with metal mounting plate
DESCRIPTION:
Diameter: 50 x 50 mm
Feet heights: 10-12-15 cm
Finishes: Chrome - Satin Nickel
Material: metal
€10.57
10,57 € tax excl.
50mm padlock with adjustable long arch.
Complete with 2 keys.
Measurements as shown in the images.
€310.66
310,66 € tax excl.
Features:
Static bioethanol stove, built in painted 10/10 structural steel
1.5 liter shutter burner, in double bottom steel with rock wool, UNI EN16647 certified
Removable trolley for easier filling
Internal...
€24.59
24,59 € tax excl.
Closing coordinator for double leaf doors in black painted iron.
Measurements as shown in the images.
€4.10
4,10 € tax excl.
Guide for latch for wasistas windows with bent strike, total arm size 19 cm (arm 18 only)
sliding slot 14 cm
base attacks 2.5x2.5 and 3.3x2.5 cm
IBMF article 347
FINISHES:
Tropicalized steel
Bronzed Steel
€5.33
5,33 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.007.00
Specifications:
D - 19 mm diameter
P - Thickness 6 mm
B - Hole Ø 6 mm
€22.55
22,55 € tax excl.
Hinges for heavy and fire doors with 2-wing bearing
to screw on doors
Max load: 2 hinges 80 Kg
€31.97
31,97 € tax excl.
Hinges for heavy and fire rated doors with 3-wing bearing
to screw on doors
Max load: 2 hinges 150 Kg
€35.98
35,98 € tax excl.
3-wing hinges for heavy and fire rated doors, round type with closing spring
Max load: 2 hinges 160 Kg
€13.11
13,11 € tax excl.
FEATURES:
Nominal loading capacity: 70 kg
Horizontal adjustment: 14 mm
Maximum vertical adjustment: 16 mm
An electric screwdriver should not be used for fixing as this could damage the bracket.
Components...
€4.92
4,92 € tax excl.
Lockable lever lock closure for cabinets or furniture doors, IBFM art. 153
Usable with 19 mm drilling
€9.75
9,75 € tax excl.
PCL-3 MECHANICAL MARKER FOR DEEP HOLES
- Tip length 45mm (Ø5.7mm), to be able to mark hard to reach places.
- Button for automatic lead advance with integrated lead sharpener.
- Rechargeable front or rear with...
€18.03
18,03 € tax excl.
PACKAGE WITH:
PCL-3 MECHANICAL MARKER FOR DEEP HOLES WITH PCL-3B GRAPHITE MINE KIT AND PCL-3C PASTEL GRAPHITE MINE KIT
Showing 1-90 of 103 item(s)
Italiano
Français
Deutsch
Español