Click for more products.
No produts were found.
0
Home
Filter By
Filter By
Color or Finish
Metric step
Diameter
Measure
Length
Weight

  • 0.03 kg - 11 kg

Brand
Brand

Home

Filter By
Brand: CMT Orange Tools Brand: EMKA Brand: Festool Brand: IBFM Brand: Intense Brand: Irwin Tools Brand: Rivit s.r.l Clear all
EMKA 1056-U27 180° screw-on hinge for door EMKA 1056-U27 180° screw-on hinge for door

60x76 mm 180° screw-on hinge for doors EMKA 1056-U27

€14.75
14,75 € tax excl.
2D screw-on hinge zinc die black powder coated; pin stainless steel. Door position: Hinges for flush doors Installation circumstances: Prominent hinge Hinge adjustable: Hinge adjustable 2D - 2D nut useable...
Aluminum combination deadbolts IBFM 56 Aluminum combination deadbolts IBFM 56

Aluminum combination deadbolts IBFM 56

€12.30
12,30 € tax excl.
Horizontal round small bolt in black painted aluminum with staple and with exposed fixing screws, and digital combination locking system. To be used in order to lock drawers, cabinets, openings or door leaves....
Black polyamide lock with lever 1000-U675 EMKA Black polyamide lock with lever 1000-U675 EMKA

Black polyamide lock with lever 1000-U675 EMKA

€8.11
8,11 € tax excl.
Black polyamide lock with lever-tab, 1/4 turn locking, nut fixing with flat gasket and self-tapping screw. 18 mm box lock complete with 3 levers (codes: 1000-5164, 1000-U26, 1000-26).
IBFM 475 spring staples against dust for locks IBFM 475 spring staples against dust for locks

Built-in floor well with dust cap and spring

€2.02
2,02 € tax excl.
Suitable for closing floor lock rods, with protective lock article 475 IBFM Measure = A A - internal hole diameter B - flange width C - well outside diameter A mm 6 8 10 12 14 16 18 20 22...
CMT Tools DAF-001 Digital angle finger CMT Tools DAF-001 Digital angle finger

CMT Tools DAF-001 Digital angle finger

€48.36
48,36 € tax excl.
LCD display, when the arm is extended the angle it makes with the base is indicated clearly on digital read-out to the nearest 0,05°. The measuring range is 0 - 360°. The vials allow variations from the vertical and...
Collet Ø 6 mm SZ-D 6/OF 1010, 488760 for router Festool Collet Ø 6 mm SZ-D 6/OF 1010, 488760 for router Festool

Collet Ø 6 mm SZ-D 6/OF 1010, 488760 for router Festool

€58.48
58,48 € tax excl.
Collet for all cutters with a shank diameter of Ø 6 mm. The union nut is conical and fits perfectly into the router holder With locking nut Suitable for Festool MFK/OFK 700 - MFKC 700 - OF 900 - OF 1000 - OF...
Collet Ø 8 mm SZ-D 8/OF 1010, 488755 for router Festool Collet Ø 8 mm SZ-D 8/OF 1010, 488755 for router Festool

Collet Ø 8 mm SZ-D 8/OF 1010, 488755 for router Festool

€58.48
58,48 € tax excl.
Collet for all cutters with a shank diameter of Ø 8 mm. The union nut is conical and fits perfectly into the router holder With locking nut Suitable for Festool MFK/OFK 700 - MFKC 700 - OF 900 - OF 1000 - OF...
Cremone handle with key for window IBFM 565/ZA Cremone handle with key for window IBFM 565/ZA

Cremone handle with key for window IBFM 565/ZA

€21.31
21,31 € tax excl.
Black painted zamak cremone handle with key, internal rod application for iron window. Key lock for window or frame locking. Available (R) Right - (L) Left. Measures looks image.
IBMF double acting spring hinges "Bommer" type IBMF double acting spring hinges "Bommer" type

Double action Bommer type spring hinge

€14.75
14,75 € tax excl.
Couple of hinges (the package contains 02 pcs) with automatic double action spring in steel, for Saloon type doors Available sizes: 75 mm - 100 mm - 150 mm Finishes available Black painted steel Nickel...
EMKA 1011-05 sealing gasket with front rabbet - per meter EMKA 1011-05 sealing gasket with front rabbet - per meter

EMKA 1011-05 sealing gasket with front rabbet - per meter

€7.38
7,38 € tax excl.
Black EPDM gasket (EPDM 65 ° ± 5 Shore A) material: foam rubber EPDM; clamping profile EPDM 65° ± 5 Shore A Surface and colour: black Seal balloon / seal body: Yes Position sealing element: top Product type:...
EMKA 1034-U1 Snap lock galvanized steel EMKA 1034-U1 Snap lock galvanized steel

EMKA 1034-U00001 galvanized steel snap lock only latch

€17.21
17,21 € tax excl.
Snap lock in galvanized steel, tongue and square in rough zamak, spring in galvanized steel.Door version: right, leftType of blocking system: block-blockmaterial: steelSurface and color: galvanizedInstallation...
EMKA 1069-U6 Hinge zinc plated EMKA 1069-U6 Hinge zinc plated

EMKA 1069-U6 Hinge zinc plated

€8.03
8,03 € tax excl.
120° hinge for screw-on fastening for 20 mm door return. Door position: Hinges for prominent doors Arrangement of cabinets: Hinge for single cabinets Installation circumstances: Concealed hinge Opening angle:...
Extension table VB, 492090 for table saw Festool Extension table VB, 492090 for table saw Festool

Extension table VB, 492090 for table saw Festool

€357.55
357,55 € tax excl.
For precise sawing work with a stop up to a cutting width of 610 mm. Easy attachment to the base table of the CS 50 VB with subsequent fine adjustment. The width extension table is usually fitted on the right. The...
Extension table VL, 492092 for table saw Festool Extension table VL, 492092 for table saw Festool

Extension table VL, 492092 for table saw Festool

€278.28
278,28 € tax excl.
The CS 70 VL length extension table can be attached to the rear table side of the CS 70 EB. The saw table is thus extended by 580 mm, and is ideally suited to being a steady support for long workpieces. The length...
IBFM Window opening stop wasistas IBFM Window opening stop wasistas

Guide arm with stop for bottom hinged windows 347

€4.10
4,10 € tax excl.
Guide for latch for wasistas windows with bent strike, total arm size 19 cm (arm 18 only) sliding slot 14 cm base attacks 2.5x2.5 and 3.3x2.5 cm IBMF article 347 FINISHES: Tropicalized steel Bronzed Steel
Guide bearing for 12,7x5x4,76 mm CMT cutter Guide bearing for 12,7x5x4,76 mm CMT cutter

Guide bearing for 12,7x5x4,76 mm CMT cutter

€5.25
5,25 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.003.00 Specifications: D - 12,7 mm diameter P - Thickness 5 mm B - Hole Ø 4,76 mm
Guide bearing for 16x5x5mm CMT cutter Guide bearing for 16x5x5mm CMT cutter

Guide bearing for 16x5x5mm CMT cutter

€4.10
4,10 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.006.00 Specifications: D - 16mm diameter P - Thickness 5 mm B - Hole Ø 5 mm
Guide bearing for 19x7x6,35 mm CMT cutter Guide bearing for 19x7x6,35 mm CMT cutter

Guide bearing for 19x7x6,35 mm CMT cutter

€4.92
4,92 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.004.00 Specifications: D - 19 mm diameter P - Thickness 7 mm B - Hole Ø 6,35 mm
Guide bearing for 22x7x8 mm CMT cutter Guide bearing for 22x7x8 mm CMT cutter

Guide bearing for 22x7x8 mm CMT cutter

€5.33
5,33 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.005.00 Specifications: D - 22 mm diameter P - Thickness 7 mm B - Hole Ø 8 mm
Guide bearing for 9,5x3,2x4,76 mm CMT cutter Guide bearing for 9,5x3,2x4,76 mm CMT cutter

Guide bearing for 9,5x3,2x4,76 mm CMT cutter

€5.90
5,90 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.002.00 Specifications: D - 9,5 mm diameter P - Thickness 3,2 mm B - Hole Ø 4,76 mm
Irwin TCT cylindrical drill bits metal drilling Irwin TCT cylindrical drill bits metal drilling

Irwin TCT cylindrical drill bits metal drilling

€10.88
10,88 € tax excl.
TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure. Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...
Irwin TURBOMAX HSS multifunction drill bits metal drilling Irwin TURBOMAX HSS multifunction drill bits metal drilling

Irwin TURBOMAX HSS multifunction drill bits metal drilling

€3.26
3,26 € tax excl.
TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...
Metal lock for mailboxes IBFM filing cabinet 142 Metal lock for mailboxes IBFM filing cabinet 142

Metal lock for mailboxes IBFM filing cabinet 142

€5.74
5,74 € tax excl.
Small lock for mailboxes with 5 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes. Opening...
Mina graphite 6 pcs for PCL-3 CMT Tools Mina graphite 6 pcs for PCL-3 CMT Tools

Mina graphite 6 pcs for PCL-3 CMT Tools

€4.34
4,34 € tax excl.
PCL-3B GRAPHITE MINE IDEAL FOR: Paper, Wood, Laminates, Building Material, Artificial Stones and Stones, Metals and Non-Ferrous Metals.
Mina graphite and pastel 6 pcs for PCL-3 CMT Tools Mina graphite and pastel 6 pcs for PCL-3 CMT Tools

Mina graphite and pastel 6 pcs for PCL-3 CMT Tools

€5.33
5,33 € tax excl.
PCL-3C GRAPHITE AND PASTEL MINE 2 pcs Graphite - 2 pcs Yellow - 2 pcs Red   IDEAL FOR: Plastic Materials, Ceramic Materials, Glass, Paper, Wood, Laminates, Building Materials, Artificial Stones and Stones, Metals...
IBMF 102 single actin spring hinge "Bommer" type IBMF 102 single actin spring hinge "Bommer" type

Pair of single action Bommer type spring hinges

€19.67
19,67 € tax excl.
Pair of Hinge (the package contains 02 pcs.) with automatic simple action spring in steel, hinge used for door closers IBFM article 102 Available sizes: 75mm Door weight for max. 2 hinges 15 Kg 100mm...
Protection profile for sheet metal and edges EMKA 1010-01 Protection profile for sheet metal and edges EMKA 1010-01

Protection profile for sheet metal and edges EMKA 1010-01

€6.96
6,96 € tax excl.
Profile for sheet metal and edges PVC 70 ° ± 5 Shore A blackmaterial: PVC 70 ° ± 5 Shore ASurface and color: blackProduct type: edge protectionSeal type: edge protectionThe clamping edge is or up to: 4Clamping edge...
Set 25 abrasive discs Mix 496124, Ø 225 mm Festool Set 25 abrasive discs Mix 496124, Ø 225 mm Festool

Set 25 abrasive discs Mix 496124, Ø 225 mm Festool

€33.00
33,00 € tax excl.
Mix of 25 abrasive discs Ø 225 mm. Brilliant2 for roughing, intermediate sanding, and finishing of furniture: 5 pieces P150 BR2 5 pieces P180 BR2 5 pieces P240 BR2 Cristal for coarse and rapid pre-sanding of...
Set 5 cylindrical drill bits for metal TURBO MAX Irwin Set 5 cylindrical drill bits for metal TURBO MAX Irwin

Set 5 cylindrical drill bits for metal TURBO MAX Irwin

€36.07
36,07 € tax excl.
TURBOMAX HSS is mainly designed for high performance drilling of metal sheets; guarantees excellent results even on any type of wood and plastic. Suitable for drilling stainless steel. Plastic box of 5 pieces with...
Set rabbet with 15 bearings 935.503.11 shank 12 mm CMT Set rabbet with 15 bearings 935.503.11 shank 12 mm CMT

Set rabbet with 15 bearings 935.503.11 shank 12 mm CMT

€139.34
139,34 € tax excl.
The complete kit (item code 835-935.503.11), will enable you to produce 17 different rabbet sizes including rabbets for under-sized plywood applications. For rabbet sizes over 12,7mm (1/2”), make the cuts in several...
Sliding table ST, 492100 Festool Sliding table ST, 492100 Festool

Sliding table ST, 492100 Festool

€397.54
397,54 € tax excl.
The sliding table offers the opportunity to achieve exactly right-angled cuts of workpieces with the associated preset profile setting rail of the CS 50. But other desired angles can also be set. Simply push the...
Slot cutter set 923.001.11 8 mm shank CMT Slot cutter set 923.001.11 8 mm shank CMT

Slot cutter set 923.001.11 8 mm shank CMT

€188.52
188,52 € tax excl.
This versatile disc cutter set allows you to create decorative effects or functional joints. By varying the combination of disc cutters you can produce channels, steps, tongues and grooves, wood biscuit joints and...
Spiral blade HS 82 RF, 484518 for planer Festool Spiral blade HS 82 RF, 484518 for planer Festool

Spiral blade HS 82 RF, 484518 for planer Festool

€24.00
24,00 € tax excl.
Replacement planer blade for the HK 82 RF rustic planing head in the fine version. This creates a wavy planing result. It resembles very weathered wood, especially if the surface is brushed after planing. The result...
Splinter guard FS-SP 5000/T, 495209 for guide rail Festool Splinter guard FS-SP 5000/T, 495209 for guide rail Festool

Splinter guard FS-SP 5000/T, 495209 for guide rail Festool

€34.00
34,00 € tax excl.
The splinter guard prevents the edges from splintering, even with angled cuts. With its help, you can apply the guide rail exactly at the scribe mark. To be able to guarantee this permanently, it must be regularly...
Load More Products
Showing 1-90 of 123 item(s)

Settings

Click for more products.
No produts were found.

Menu

Please sign in first.

Sign in

Create a free account to use wishlists.

Sign in