Home

Filter

180 ° screw-on hinge 1055-U4 EMKA in galvanized steel, pin and washer in nickel-plated brass

€11.64

11,64 € tax excl.

180 ° screw-on hinge in galvanized steel, pin and washer in nickel-plated brass 1055-U4 EMKA Length 53 mm, Height 40.2 mm, Distance between mounting holes 38 mm

60x76 mm 180° screw-on hinge for doors EMKA 1056-U27

€14.75

14,75 € tax excl.

2D screw-on hinge zinc die black powder coated; pin stainless steel. Door position: Hinges for flush doors Installation circumstances: Prominent hinge Hinge adjustable: Hinge adjustable 2D - 2D nut useable...

Aluminum blow gun short nozzle 50080 PA ASTUROMEC-WALMEC

€5.74

5,74 € tax excl.

Aluminum blow gun for any use with short nozzle Working pressure: 1.0 - 6.0 bar

Aluminum blow gun with long barrel 50081 PA / L ASTUROMEC-WALMEC

€8.20

8,20 € tax excl.

Aluminum blow gun for any use with 150 mm long barrel Working pressure: 1.0 - 6.0 bar

Black Gas spring Stabilus Lift-O-Mat 380 mm - 364 mm

€28.69

28,69 € tax excl.

Black Gas spring Stabilus Lift-O-Mat 380 mm - 364 mm Stem diameter 6 mm Total length open 380 mm Hole center distance 364 mm

Black Gas spring Stabilus Lift-O-Mat 400 mm - 385 mm

€50.00

50,00 € tax excl.

Black Gas spring Stabilus Lift-O-Mat 400 mm - 385 mm Stem diameter 10 mm Stem length 183 mm Body diameter 22 mm Body length 217 mm Total length open 40 cm Hole center distance 385 mm

Black Gas spring Stabilus Lift-O-Mat 159 mm

€25.41

25,41 € tax excl.

Black Gas spring Stabilus Lift-O-Mat 159 mm with perforated connections Stem diameter 6 mm Stem length 6.9 cm Body diameter 15 mm Body length 9 cm Total length open 15.9 cm Hole center distance 145.5 mm

Black Gas spring Stabilus Lift-O-Mat 185,5 mm

€23.77

23,77 € tax excl.

Black Gas spring Stabilus Lift-O-Mat 185,5 mm Stem diameter 6 mm Stem length 8,8 cm Body diameter 15 mm Body length 11 cm Total length open 19,8 cm Hole center distance 185,5 mm

Black Gas spring Stabilus Lift-O-Mat 220 mm

€19.39

19,39 € tax excl.

Black Gas spring Stabilus Lift-O-Mat 220 mm Stem diameter 8 mm Stem length 9.5 cm Body diameter 18 mm Body length 12.5 cm Total length open 22 cm Hole center distance 205 mm

Black Gas spring Stabilus Lift-O-Mat 485 mm wheelbase 1150 Newton

€54.50

54,50 € tax excl.

Black Gas spring Stabilus Lift-O-Mat 485 mm

Black Gas spring Stabilus Lift-O-Mat 785 mm wheelbase 400 Newton

€71.31

71,31 € tax excl.

Whether you want to lift or lower, Lift-O-Mat gas springs will provide the controlled motion you require. Lift-O-Mats are easy to install, maintenance-free, and cost-effective. We offer a wide variety of sizes,...

Black Gas spring Stabilus LIFT-O-MAT for Effegi Brevetti

€20.49

20,49 € tax excl.

Gas spring Stabilus Newton for Effegi Brevetti, 150 (8816NI-0150N) -200 (9278NX-0200N) -250 (9279NS-0250N) -300 (9281NZ-0300N) -350 (6011SE-0350N) -400 (4775SX-0400N) -450 (4774SB-0450N) -500 (0681SW-0500N) -550...

Black Piston 240mm Stabilus Lift-O-Mat Gas Spring 226.5 Int

€33.61

33,61 € tax excl.

Stabilus Lift-O-Mat gas spring piston lever arm gray for mechanism replacement NEWTONS: 50-100-150-200-250-300-350-400 - Stem diameter 6 mm - Stem length 11cm - Body diameter 15-15.6 mm - Body length 13cm -...

Black polyamide lock with lever 1000-U675 EMKA

€8.11

8,11 € tax excl.

Black polyamide lock with lever-tab, 1/4 turn locking, nut fixing with flat gasket and self-tapping screw. 18 mm box lock complete with 3 levers (codes: 1000-5164, 1000-U26, 1000-26).

Blow gun 1 m folding barrel PROFI 50004 ASTUROMEC-WALMEC

€27.79

27,79 € tax excl.

Professional blow gun. Progressive dispensing valve with stainless steel spring Air inlet: M 1/4 ”with FF swivel connection Body: hostaform C® Barrel: 1 m foldable in shapeable copper Working pressure: 1.0 - 6.0 bar

CMT Tools DAF-001 Digital angle finger

€48.36

48,36 € tax excl.

LCD display, when the arm is extended the angle it makes with the base is indicated clearly on digital read-out to the nearest 0,05°. The measuring range is 0 - 360°. The vials allow variations from the vertical and...

Disposable latex gloves without powder with aloe vera Reflexx L600 – gr.6,2

€8.50

8,10 € tax excl.

Reflexx L600 - latex glove with aloe vera - pack of 100 pieces Aloe vera is only one of the many species of aloe, but undoubtedly the most used in both cosmetics and health. It is a plant known since ancient times...

Double-bit insert key 3, powder-coated black zamak Emka 1004-05

€3.69

3,69 € tax excl.

Double-bit insert key 3, powder-coated black zamak Emka 1004-05

EMKA 1011-05 sealing gasket with front rabbet - per meter

€7.38

7,38 € tax excl.

Black EPDM gasket (EPDM 65 ° ± 5 Shore A) material: foam rubber EPDM; clamping profile EPDM 65° ± 5 Shore A Surface and colour: black Seal balloon / seal body: Yes Position sealing element: top Product type:...

EMKA 1011-06 gasket, self-locking foam rubber EPDM with side stop

€7.38

7,38 € tax excl.

material: EPDM foam; tightening profile EPDM 65 ° ± 5 Shore ASurface and color: blackSeal flask / seal body: YesPosition the sealing element: lateralType of product: sealType of gasket: self-locking clip profileThe...

EMKA 1032-U6 galvanized steel hinge

€9.02

9,02 € tax excl.

135 ° hinge for doors with 22 mm rabbet

EMKA 1034-U00001 galvanized steel snap lock only latch

€17.21

17,21 € tax excl.

Snap lock in galvanized steel, tongue and square in rough zamak, spring in galvanized steel.Door version: right, leftType of blocking system: block-blockmaterial: steelSurface and color: galvanizedInstallation...

EMKA 1036-U4 Profile hinge zinc plated with weld-on stud raw

€8.11

8,11 € tax excl.

Profile hinge zinc plated with weld-on stud raw cover stainless steel. Door position: Hinges for prominent doors Arrangement of cabinets: Hinge for single cabinets Installation circumstances: Prominent hinge...

EMKA 1047-U2 closure button

€8.93

8,93 € tax excl.

Button closure in chrome-plated zamak without seal.

EMKA 1069-U6 Hinge zinc plated

€8.03

8,03 € tax excl.

120° hinge for screw-on fastening for 20 mm door return. Door position: Hinges for prominent doors Arrangement of cabinets: Hinge for single cabinets Installation circumstances: Concealed hinge Opening angle:...

EMKA 1069-U7 galvanized steel hinge

€12.91

12,91 € tax excl.

135 ° hinge with stop for 20/25 mm doors

EMKA 1080-U2 plastic latch

€17.21

17,21 € tax excl.

Latch of gray Makrolon, box and flap Delrin gray, gray POM spring.

Food waste disposer Model 45 InSinkErator - Garbage disposal

€192.62

192,62 € tax excl.

Model 45 disposer with single-stage grinding technology and 0.5 HP motor. Food scraps are ground and discarded in seconds. Clean, hygienic, practical, and easy to use. Easy to install, it can be placed in most sinks....

Food waste disposer Premium 550SR InSinkErator - Garbage disposal

€450.82

450,82 € tax excl.

Premium 550SR disposer with single-stage grinding technology and 0.55 HP motor. Food scraps are ground and discarded in seconds. Clean, hygienic, practical, and easy to use. Easy to install, it can be placed in most...

Food waste disposer Standard 460SR InSinkErator - Garbage disposal

€377.05

377,05 € tax excl.

Standard 460SR disposer with single-stage grinding technology and 0.55 HP motor. Food scraps are ground and discarded in seconds. Clean, hygienic, practical, and easy to use. Easy to install, it can be placed in most...

Gas spring damper Stabilus Lift-O-Mat 216 mm Kessebohmer

€49.18

49,18 € tax excl.

Gas spring damper, 380 Newton, Stabilus Lift-O-Mat Koblenz 216 mm with snap connections for Kessembohmer Stem diameter 8 mm Stem length 8.6 cm Body diameter 18 mm Body length 13 cm Total length open 21.6 cm Hole...

Grey Gas spring damper Stabilus Lift-O-Mat 212 mm Kessebohmer

€22.95

22,95 € tax excl.

Grey Gas spring damper, 250-320-400 Newton, Stabilus Lift-O-Mat Koblenz 212 mm with snap connections for Kessembohmer Stem diameter 8 mm Stem length 8.4 cm Body diameter 18 mm Body length 12.8 cm Total length...

Grey Gas spring Stabilus Hydro-Lift for mechanism Salice

€27.05

27,05 € tax excl.

Grey Gas spring Stabilus Hydro-Lift for mechanism Salice for arm mechanisms for kitchen cabinet doors. NEWTON : 150 (9104XZ-0150N) -250 (9085WK-0250N) -350 (3073XQ-0350N) -450 (7422WW-0450N) -500 (9089WR-0500N) -550...

Grey Gas spring Stabilus Lift-O-Mat 198 mm

€25.57

25,57 € tax excl.

Grey Gas spring Stabilus Lift-O-Mat 198 mm NEWTON: 200-280-300-350-375-400-420-450-480-510 Stem diameter 6 mm Stem length 8.8 cm Body diameter 15,6 mm Body length 11 cm Total length open 19.8 cm Hole center...

Grey Gas spring Stabilus Lift-O-Mat 240 mm 226,5 mm Int.

€35.25

35,25 € tax excl.

Grey Gas spring Stabilus Lift-O-Mat 240 mm NEWTON: 200-250-300-320-350-380-400-420-450-480-500-530 Stem diameter 6 mm Stem length 11 cm Body diameter 15-15,6 mm Body length 13 cm Total length open 24 cm Hole...

Grey Gas spring Stabilus Lift-O-Mat 290 mm 275,5 mm Int.

€36.07

36,07 € tax excl.

Arm Piston gas spring Stabilus Lift-O-Mat gray for spare parts for mechanisms NEWTON: 060-080-100-125-150 Stem diameter 6 mm Stem length 11 cm Body diameter 15 mm Body length 13,5 cm Total length open 29 cm...

Guide bearing for 12,7x5x4,76 mm CMT cutter

€5.25

5,25 € tax excl.

Radial ball bearing with seals, replacement for cutter Cmt Article 791.003.00 Specifications: D - 12,7 mm diameter P - Thickness 5 mm B - Hole Ø 4,76 mm

Guide bearing for 16x5x5mm CMT cutter

€4.10

4,10 € tax excl.

Radial ball bearing with seals, replacement for cutter Cmt Article 791.006.00 Specifications: D - 16mm diameter P - Thickness 5 mm B - Hole Ø 5 mm

Guide bearing for 19x7x6,35 mm CMT cutter

€4.92

4,92 € tax excl.

Radial ball bearing with seals, replacement for cutter Cmt Article 791.004.00 Specifications: D - 19 mm diameter P - Thickness 7 mm B - Hole Ø 6,35 mm

Guide bearing for 22x7x8 mm CMT cutter

€5.33

5,33 € tax excl.

Radial ball bearing with seals, replacement for cutter Cmt Article 791.005.00 Specifications: D - 22 mm diameter P - Thickness 7 mm B - Hole Ø 8 mm

Guide bearing for 9,5x3,2x4,76 mm CMT cutter

€5.90

5,90 € tax excl.

Radial ball bearing with seals, replacement for cutter Cmt Article 791.002.00 Specifications: D - 9,5 mm diameter P - Thickness 3,2 mm B - Hole Ø 4,76 mm

Guide rail GRP 800/2, 638188 length 800 mm Protool

€79.26

79,26 € tax excl.

Guide Rail 800 mm for plunge saws, Circular Saws, Jigsaws and Routers. Safe and straight guidance of the machine Protects the workpiece surface from damage Coating for smooth machine movement

Hahn Gasfedern gas spring 400 N black for DUOLETTO folding bed 460mm

€147.54

147,54 € tax excl.

FEATURES: - Total length 475 mm -Length 460 mm from eyelet center to eyelet center. - 180 mm stroke. -Diameter 8/19 mm. -400 N thrust. - Eyelet attachments. -To be moved only on the bed base and with the...

Hinge 40x40 mm 180° with clutch in black alloy EMKA 1056-U6-01

€16.31

16,31 € tax excl.

180° Screw-on torque hinge zinc-die black powder-coated for countersunk screw M5; friction cone polyacetal POM; screw and nut m.s. zinc-plated. Adjustable torque Holds any position continuously at adequate load...

Hinge in stainless steel 180 ° screwable with regulation PROGRAM 1054 EMKA

€121.23

121,23 € tax excl.

Reversible overlapping hinge to screw in 316 stainless steel with 4mm height adjustment, washer and pin in stainless steel EMKA 1054-U39

Inflating gun with nylon pressure gauge 50106 PG / S ASTUROMEC-WALMEC

€21.23

21,23 € tax excl.

Pneumatic inflating gun body in shockproof nylon - Manometer diameter mm. 63 - Tube length mm. 400 - Brass head

Irwin CORDLESS MULTI Series Joran cylindrical drill bits masonry drilling

€3.34

3,34 € tax excl.

CORDLESS MULTI FOR ROTARY DRILLING ONLY - NO HAMMER/PERCUSSION drill bits are ideal for drilling the most common materials, including: brickwork, breeze block, wood, dry wall, slate, plastics, sheet metal. Unique...

Irwin DIAMOND Series Joran cylindrical drill bits masonry drilling

€31.97

31,97 € tax excl.

DIAMOND - COOL WATER - NO PERCUSSION for fast, smooth cutting in all grades of hard and soft tiles. Drilling with water increases the lifespan of the tool. Do not press strongly on the tool, let it work. Make a...

Irwin GRANITE Series Joran cylindrical drill bits masonry-granite drilling

€5.39

5,39 € tax excl.

GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite. Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill bits....

Irwin Series Joran CORDLESS MULTI Set cylindrical drill bits masonry drilling

€18.20

18,20 € tax excl.

CORDLESS MULTI is able of drilling wide selection of materials: brick, marble, metal, tile, slate, gypsum, limestone, hard plastic, wood, cast iron and hardened steel.Plastic box of 5 pieces with bits 4 - 5 - 6 - 8 -...

Irwin Series Joran GRANITE Set cylindrical drill bits masonry-granite drilling

€25.33

25,33 € tax excl.

GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite.Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill...

Irwin Series SPEEDBOR BLUE GROOVE 4X Flat drill bits wood drilling 400mm Long

€9.20

9,20 € tax excl.

BLUE GROOVE 4X Four times faster than the basic flat drill bits double Cutting Spurs scribe outside of the hole, reducing breakout. Thicker Cutting Edge for longer drilling life. Bluegroove Point & Cutting Edge...

Irwin TCT cylindrical drill bits metal drilling

€10.88

10,88 € tax excl.

TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure. Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...

Irwin TURBOMAX HSS multifunction drill bits metal drilling

€3.26

3,26 € tax excl.

TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...

Key EK 333, nickel silver with black polamide head 1108-U35 EMKA

€4.10

4,10 € tax excl.

Key EK 333, nickel silver with black polamide head for EMKA locks.

Key for insert railway, Zinc die black 1004-52 EMKA

€9.84

9,84 € tax excl.

Key for insert Square 9, railway version, Zinc die black powder-coated.

Key for insert square 6 in Zinc black 1004-18 EMKA

€2.87

2,87 € tax excl.

Key for insert square 6 mm, Zinc die black powder-coated.

Key for insert square 7 in Zinc black 1004-01 EMKA

€3.28

3,28 € tax excl.

Key for insert square 7 mm, Zinc black powder-coated.

Key for insert triangular 10 in Zinc black 1004-24 EMKA

€4.10

4,10 € tax excl.

Key for insert triangular 10 mm, Zinc black powder-coated.

Key for insert triangular 7 in Zinc black 1004-03 EMKA

€3.28

3,28 € tax excl.

Key for insert triangular 7 mm, Zinc black powder-coated.

Key for insert triangular 8 in Zinc black 1004-04 Emka

€3.69

3,69 € tax excl.

Key for insert triangular 8 mm, Zinc black powder-coated.

L-handle quarter turn for padlock, Stainless steel AISI 316 Emka 1000-U860

€79.90

79,90 € tax excl.

L-handle quarter turn for padlock, Stainless steel AISI 316 Emka 1000-U860

Lift-O-Mat black gas piston Stabilus for folding bed 430mm

€40.98

40,98 € tax excl.

FEATURES: Length 415 mm from eyelet center to eyelet center. Motion 160 mm. Supplied without safety clips. Shock absorption when mounted with rod facing downwards. 600/800 N thrust. Eyelet Attacks. Weight:...

MicroSandy cut protection nitrile supported industrial gloves Reflexx N22 MS

€4.92

4,92 € tax excl.

CUT PROTECTIVE glove – Level C The HPPE knit provides cut-resistance, while the elastane and polyamide render the glove elastic and comfortable. The palm is coated with a DOUBLE application of MICROSANDY NITRILE,...

MicroSandy nitrile supported industrial gloves Reflexx N16 MS

€2.87

2,87 € tax excl.

Seamless, in continuous-thread knit, coated externally in Nitrile. POLYAMIDE/SPANDEX glove. The presence of Spandex increases the elasticity of the glove, also limiting the penetration of liquids. The palm is...

Mina graphite 6 pcs for PCL-3 CMT Tools

€4.34

4,34 € tax excl.

PCL-3B GRAPHITE MINE IDEAL FOR: Paper, Wood, Laminates, Building Material, Artificial Stones and Stones, Metals and Non-Ferrous Metals.

Mina graphite and pastel 6 pcs for PCL-3 CMT Tools

€5.33

5,33 € tax excl.

PCL-3C GRAPHITE AND PASTEL MINE 2 pcs Graphite - 2 pcs Yellow - 2 pcs Red IDEAL FOR: Plastic Materials, Ceramic Materials, Glass, Paper, Wood, Laminates, Building Materials, Artificial Stones and Stones, Metals...

OM ASTUROMEC-WALMEC series airbrush tank above 680 cc

€98.36

98,36 € tax excl.

Tank - Nylon 680 cc Body - Nickel-plated sandblasted brass Cap - Nickel-plated brass Needle / Springs / Nozzle - Stainless Steel Adjustments - Product / range Weight 780 g Operating pressure 3.0 - 3.5 bar Air...

Polyurethane supported industrial gloves Reflexx PU18G Grey

€1.23

1,23 € tax excl.

Polyamide glove, extremely elastic and offering high sensitivity Palm coated in POLYURETHANE for utmost breathability Particularly suitable for the general manufacturing, logistics, construction, carpentry,...

Powder Free Nitrile Gloves Reflexx 76 gr. 3,5 - pack of 100 pieces

€3.70

3,52 € tax excl.

Disposable, ambidextrous. Beaded cuff. 100% Latex Free. Special “Soft” formulation for increased elasticity and sensitiveness. The absence of powder also reduces the risk of dermatitis and contamination. Micro...

Powder free nitrile gloves Reflexx N80B gr. 3.0-pack of 100 pieces

€5.00

4,76 € tax excl.

POWDER FREE NITRILE GLOVES - gr. 3.0 MULTI-USE glove suitable for multiple sectors of use thanks to its versatility PPE Cat. I risk (Reg 2016/425 UE) MEDICAL DEVICE in the hospital and dental field (AQL 1,5), for...

Premium Plus 700 SR Food Waste Disposer – InSinkErator

€647.54

647,54 € tax excl.

Compact, quiet, and powerful: the Premium Plus 700 SR food waste disposer reduces your household waste to particles, disposing of it conveniently and hygienically. Easy installation thanks to Lift & Latch...

Professional blow gun PROFI 50000 ASTUROMEC-WALMEC

€17.46

17,46 € tax excl.

Professional blow gun. Progressive dispensing valve with stainless steel spring Air inlet: M 1/4 ”with FF swivel connection Body: hostaform C® Barrel: 150 mm curved Working pressure: 1.0 - 6.0 bar

Protection profile for sheet metal and edges EMKA 1010-01

€6.96

6,96 € tax excl.

Profile for sheet metal and edges PVC 70 ° ± 5 Shore A blackmaterial: PVC 70 ° ± 5 Shore ASurface and color: blackProduct type: edge protectionSeal type: edge protectionThe clamping edge is or up to: 4Clamping edge...

Protection profile for sheet metal and edges EMKA 1010-02 per meter

€4.44

4,44 € tax excl.

Profile for sheet metal and edges PVC 70 ° ± 5 Shore A blackin black PVC 1010-000002 reinforced with metal core

Reduction-increase bushing for 13 / 16 mm stem Cmt

€6.15

6,15 € tax excl.

Adapter bushing ring on cutter shank or tip Specifications: D - 16 mm diameter L - Length 45mm d - Hole Ø 13 mm

Reduction-increase bushing for 6 / 12 mm stem Cmt

€6.15

6,15 € tax excl.

Adapter bushing ring on cutter shank or tip Specifications: D - 12mm diameter L - Length 25mm d - Hole Ø 6 mm

Reduction-increase bushing for 6 / 8 mm stem Cmt

€6.15

6,15 € tax excl.

Adapter bushing ring on cutter shank or tip Specifications: D - 8mm diameter L - Length 25mm d - Hole Ø 6 mm

Reduction-increase bushing for 8 / 12 mm stem Cmt

€6.15

6,15 € tax excl.

Adapter bushing ring on cutter shank or tip Specifications: D - 12mm diameter L - Length 25mm d - Hole Ø 8 mm

Screw-on 180 ° hinge 1039-U15 EMKA in galvanized steel, pin and washer in nickel-plated brass

€20.30

20,30 € tax excl.

Long screwable three-piece 180 ° hinge with 2 holes 8.4 mm in galvanized steel, pin and washer in nickel-plated brass 1039-U15 EMKA Length 91 mm, Height 55 mm

Sealing profile gasket to Z EMKA 1074-04 for glass and sheet metal

€10.66

10,66 € tax excl.

Sealing profile in NBR 80 ° Shore A for 6 mm glass and 2 mm sheet metal, with Z shape for sealing profiles

Set 4 pcs diamond hole saws for drilling with guide and hexagonal adapter 552-501-06 Cmt

€65.57

65,57 € tax excl.

The Set contains: 552-705 Ø 5mm (3/16 ") 552-706 Ø 6mm (1/4 ") 552-708 Ø 8mm (5/16 ") 552-712 Ø 12mm (1/2 ") 552-GUIDE 552-EX14 - HEXAGONAL ADAPTER FOR DRILL BIT

Set 5 cylindrical drill bits for metal TURBO MAX Irwin

€36.07

36,07 € tax excl.

TURBOMAX HSS is mainly designed for high performance drilling of metal sheets; guarantees excellent results even on any type of wood and plastic. Suitable for drilling stainless steel. Plastic box of 5 pieces with...

Set of 3 cutters for making wooden doors 800.527.11 shank 12.7 Cmt

€286.89

286,89 € tax excl.

This set of 3 multifunctional cutters for making entrance and passage doors. Working in conjunction with the tongue and groove cutters, the set allows you to produce reinforced tenons up to 27mm in length with minimal...

Set rabbet with 15 bearings 935.503.11 shank 12 mm CMT

€139.34

139,34 € tax excl.

The complete kit (item code 835-935.503.11), will enable you to produce 17 different rabbet sizes including rabbets for under-sized plywood applications. For rabbet sizes over 12,7mm (1/2”), make the cuts in several...

Slot cutter set 923.001.11 8 mm shank CMT

€188.52

188,52 € tax excl.

This versatile disc cutter set allows you to create decorative effects or functional joints. By varying the combination of disc cutters you can produce channels, steps, tongues and grooves, wood biscuit joints and...

Universal key, Polyamide GF blue 1004-48 EMKA

€2.23

2,23 € tax excl.

Universal key, Polyamide GF blue for insert Double bit 5, Square female 6, Slot, Square 8.

Aluminum washing gun with tank 50086 NE / S ASTUROMEC-WALMEC

€19.02

19,02 € tax excl.

Aluminum washing gun with bayonet tank with 1000 cc screw closure Adjustable nebulizer nozzle in nickel-plated brass Extra wide opening - Bayonet lock Working pressure: 2.0 - 8.0 bar

EMKA 1001-U30 1001-U31 hook lock

€24.59

24,59 € tax excl.

Hook lock in galvanized steel, hook with return spring (snap movement, also with firm handle).Door version: left or rightHeavy Duty Block: YesSize A: A 20, A 26material: steelSurface and color: galvanizedInstallation...

EMKA 1085-U1 ratchet snap lock

€12.30

12,30 € tax excl.

Snap lock ratchet in galvanized steel.Overlapping spring pinDoor version: right, leftType of blocking system: block-blockType of fixing case: nut fixingmaterial: steelSurface and color: galvanizedInstallation...

Load More Products

Showing 1-90 of 118 item(s)

The prices shown are reserved exclusively for online sales

Customer care

Information

STORE INFORMATION

Mancini & Mancini S.r.l
Via Cavour, 18

66020 - Sambuceto, Chieti, Italy
Open: Mon-Fri 8.30am - 12.30am/3.00pm - 6.00pm -

Sat 8.30am - 12.30am

Phone: +39 085.4408697

Email: info@shopmancini.com

Name	Provider	What it does	Expiry	Allow (Check all)
Shopping cart	Prestashop	This provides, and keeps the products inside your shopping cart. Deactivating this cookie would stop permitting the orders. This cookie doesn't save any personal Data about any shop client. This provides, and keeps the products inside your shopping cart. Deactivating this cookie would stop permitting the orders. This cookie doesn't save any personal Data about any shop client.	30 days	Allow
Language Selection.	Prestashop	Cookie we use to offer you the possibility to switch the language of our contents. If cookie is disabled you'll see the site in the original language. Cookie we use to offer you the possibility to switch the language of our contents. If cookie is disabled you'll see the site in the original language.	30 days	Allow

Name	Provider	What it does	Expiry	Allow (Check all)
Stats Data	Prestashop	A Shop Cookie, which saves data about orders, carts, IP of the clients. The data's are kept save inside the back-office, and serve solely as statistical data for improving our services and products. A Shop Cookie, which saves data about orders, carts, IP of the clients. The data's are kept save inside the back-office, and serve solely as statistical data for improving our services and products.	30 days	Allow
Google Analytics	Google	Standard tracking, which make our shop understand the necessity and places to improve our shop. Cookie last for 30 days. Standard tracking, which make our shop understand the necessity and places to improve our shop. Cookie last for 30 days.	30 days	Allow

Home

Necessary

Statistics

Settings

Search

Menu