Home

Filter

180 ° screw-on hinge 1055-U4 EMKA in galvanized steel, pin and washer in nickel-plated brass

€11.64

11,64 € tax excl.

180 ° screw-on hinge in galvanized steel, pin and washer in nickel-plated brass 1055-U4 EMKA Length 53 mm, Height 40.2 mm, Distance between mounting holes 38 mm

60x76 mm 180° screw-on hinge for doors EMKA 1056-U27

€14.75

14,75 € tax excl.

2D screw-on hinge zinc die black powder coated; pin stainless steel. Door position: Hinges for flush doors Installation circumstances: Prominent hinge Hinge adjustable: Hinge adjustable 2D - 2D nut useable...

90 ° aluminum corner for Volpato 20 / 10.400AL plinth

€1.56

1,56 € tax excl.

90 ° angle in aluminum 21 / 19.F2 for Volpato plinth 20 / 10.400AL Available height 100mm / 120mm / 150mm

Accessory kit for Volpato upstand

€2.46

2,46 € tax excl.

Accessory kit for upstand 50 / 65.400AL which includes Internal corner External corner Right Cap Left Cap

Adjustable extendable shoe rack universal mounting, chrome tubes black supports

€9.84

9,84 € tax excl.

Extendable shoe rack with chrome/black finish, adjustable with mounting on both the side and the bottom of the cabinet. Size 1: 40-80cm Size 2: 80-110 cm

Adjustable plastic bed leg-foot from 15 to 26 cm for the central beam of the bed

€4.92

4,92 € tax excl.

Features: Hight 170 mm, adjustable from -22 to + 96mm Finishing: black

Black polyamide lock with lever 1000-U675 EMKA

€8.11

8,11 € tax excl.

Black polyamide lock with lever-tab, 1/4 turn locking, nut fixing with flat gasket and self-tapping screw. 18 mm box lock complete with 3 levers (codes: 1000-5164, 1000-U26, 1000-26).

CMT Tools DAF-001 Digital angle finger

€48.36

48,36 € tax excl.

LCD display, when the arm is extended the angle it makes with the base is indicated clearly on digital read-out to the nearest 0,05°. The measuring range is 0 - 360°. The vials allow variations from the vertical and...

Cremone mechanism with one adjustable closure 02.F10022ABQ2 for window

€9.84

9,84 € tax excl.

Brass Lock for window, square edge and striking plate with only one closure with different backset 02.F10022ABQ2 FEATURES: Measure E: from 10 to 20 mm Edge size: 104x15 mm Measuring striking plate: 80x15 mm

Cutlery tray with compartments for 40-45 cm drawer - 32/72.N

€6.15

6,15 € tax excl.

Cutlery tray gray trimmable for drawer 40-45 cm Volpato 32/72, plastic material obtained by injection molding or thermoforming, eco-friendly, suitable for contact with food and excellent scratch resistance. Width 356...

Divider tray for cutlery drawer 55-60 cm - 32/72

€7.38

7,38 € tax excl.

Cutlery tray gray trimmable for drawer 55-60 cm Volpato 32/72, plastic material obtained by injection molding or thermoforming, eco-friendly, suitable for contact with food and excellent scratch resistance. Width 501...

Double-bit insert key 3, powder-coated black zamak Emka 1004-05

€3.69

3,69 € tax excl.

Double-bit insert key 3, powder-coated black zamak Emka 1004-05

EMKA 1011-05 sealing gasket with front rabbet - per meter

€7.38

7,38 € tax excl.

Black EPDM gasket (EPDM 65 ° ± 5 Shore A) material: foam rubber EPDM; clamping profile EPDM 65° ± 5 Shore A Surface and colour: black Seal balloon / seal body: Yes Position sealing element: top Product type:...

EMKA 1011-06 gasket, self-locking foam rubber EPDM with side stop

€7.38

7,38 € tax excl.

material: EPDM foam; tightening profile EPDM 65 ° ± 5 Shore ASurface and color: blackSeal flask / seal body: YesPosition the sealing element: lateralType of product: sealType of gasket: self-locking clip profileThe...

EMKA 1032-U6 galvanized steel hinge

€9.02

9,02 € tax excl.

135 ° hinge for doors with 22 mm rabbet

EMKA 1034-U00001 galvanized steel snap lock only latch

€17.21

17,21 € tax excl.

Snap lock in galvanized steel, tongue and square in rough zamak, spring in galvanized steel.Door version: right, leftType of blocking system: block-blockmaterial: steelSurface and color: galvanizedInstallation...

EMKA 1036-U4 Profile hinge zinc plated with weld-on stud raw

€8.11

8,11 € tax excl.

Profile hinge zinc plated with weld-on stud raw cover stainless steel. Door position: Hinges for prominent doors Arrangement of cabinets: Hinge for single cabinets Installation circumstances: Prominent hinge...

EMKA 1047-U2 closure button

€8.93

8,93 € tax excl.

Button closure in chrome-plated zamak without seal.

EMKA 1069-U6 Hinge zinc plated

€8.03

8,03 € tax excl.

120° hinge for screw-on fastening for 20 mm door return. Door position: Hinges for prominent doors Arrangement of cabinets: Hinge for single cabinets Installation circumstances: Concealed hinge Opening angle:...

EMKA 1069-U7 galvanized steel hinge

€12.91

12,91 € tax excl.

135 ° hinge with stop for 20/25 mm doors

EMKA 1080-U2 plastic latch

€17.21

17,21 € tax excl.

Latch of gray Makrolon, box and flap Delrin gray, gray POM spring.

Guide bearing for 12,7x5x4,76 mm CMT cutter

€5.25

5,25 € tax excl.

Radial ball bearing with seals, replacement for cutter Cmt Article 791.003.00 Specifications: D - 12,7 mm diameter P - Thickness 5 mm B - Hole Ø 4,76 mm

Guide bearing for 16x5x5mm CMT cutter

€4.10

4,10 € tax excl.

Radial ball bearing with seals, replacement for cutter Cmt Article 791.006.00 Specifications: D - 16mm diameter P - Thickness 5 mm B - Hole Ø 5 mm

Guide bearing for 19x7x6,35 mm CMT cutter

€4.92

4,92 € tax excl.

Radial ball bearing with seals, replacement for cutter Cmt Article 791.004.00 Specifications: D - 19 mm diameter P - Thickness 7 mm B - Hole Ø 6,35 mm

Guide bearing for 22x7x8 mm CMT cutter

€5.33

5,33 € tax excl.

Radial ball bearing with seals, replacement for cutter Cmt Article 791.005.00 Specifications: D - 22 mm diameter P - Thickness 7 mm B - Hole Ø 8 mm

Guide bearing for 9,5x3,2x4,76 mm CMT cutter

€5.90

5,90 € tax excl.

Radial ball bearing with seals, replacement for cutter Cmt Article 791.002.00 Specifications: D - 9,5 mm diameter P - Thickness 3,2 mm B - Hole Ø 4,76 mm

Hinge 40x40 mm 180° with clutch in black alloy EMKA 1056-U6-01

€16.31

16,31 € tax excl.

180° Screw-on torque hinge zinc-die black powder-coated for countersunk screw M5; friction cone polyacetal POM; screw and nut m.s. zinc-plated. Adjustable torque Holds any position continuously at adequate load...

Hinge in stainless steel 180 ° screwable with regulation PROGRAM 1054 EMKA

€121.23

121,23 € tax excl.

Reversible overlapping hinge to screw in 316 stainless steel with 4mm height adjustment, washer and pin in stainless steel EMKA 1054-U39

Hook for kitchen furniture foot plinth

€0.74

0,74 € tax excl.

Plug-in socket hook in black plastic for snap hooking of the furniture foot

Internal corner in aluminum Volpato 80 / G1.1A90B

€23.77

23,77 € tax excl.

Volpato 80 / G1.1A90B aluminum internal corner for Volpato 80 / G1.2AL classic horizontal groove profile

Irwin CORDLESS MULTI Series Joran cylindrical drill bits masonry drilling

€3.34

3,34 € tax excl.

CORDLESS MULTI FOR ROTARY DRILLING ONLY - NO HAMMER/PERCUSSION drill bits are ideal for drilling the most common materials, including: brickwork, breeze block, wood, dry wall, slate, plastics, sheet metal. Unique...

Irwin DIAMOND Series Joran cylindrical drill bits masonry drilling

€31.97

31,97 € tax excl.

DIAMOND - COOL WATER - NO PERCUSSION for fast, smooth cutting in all grades of hard and soft tiles. Drilling with water increases the lifespan of the tool. Do not press strongly on the tool, let it work. Make a...

Irwin GRANITE Series Joran cylindrical drill bits masonry-granite drilling

€5.39

5,39 € tax excl.

GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite. Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill bits....

Irwin Series Joran CORDLESS MULTI Set cylindrical drill bits masonry drilling

€18.20

18,20 € tax excl.

CORDLESS MULTI is able of drilling wide selection of materials: brick, marble, metal, tile, slate, gypsum, limestone, hard plastic, wood, cast iron and hardened steel.Plastic box of 5 pieces with bits 4 - 5 - 6 - 8 -...

Irwin Series Joran GRANITE Set cylindrical drill bits masonry-granite drilling

€25.33

25,33 € tax excl.

GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite.Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill...

Irwin Series SPEEDBOR BLUE GROOVE 4X Flat drill bits wood drilling 400mm Long

€9.20

9,20 € tax excl.

BLUE GROOVE 4X Four times faster than the basic flat drill bits double Cutting Spurs scribe outside of the hole, reducing breakout. Thicker Cutting Edge for longer drilling life. Bluegroove Point & Cutting Edge...

Irwin TCT cylindrical drill bits metal drilling

€10.88

10,88 € tax excl.

TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure. Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...

Irwin TURBOMAX HSS multifunction drill bits metal drilling

€3.26

3,26 € tax excl.

TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...

Key EK 333, nickel silver with black polamide head 1108-U35 EMKA

€4.10

4,10 € tax excl.

Key EK 333, nickel silver with black polamide head for EMKA locks.

Key for insert railway, Zinc die black 1004-52 EMKA

€9.84

9,84 € tax excl.

Key for insert Square 9, railway version, Zinc die black powder-coated.

Key for insert square 6 in Zinc black 1004-18 EMKA

€2.87

2,87 € tax excl.

Key for insert square 6 mm, Zinc die black powder-coated.

Key for insert square 7 in Zinc black 1004-01 EMKA

€3.28

3,28 € tax excl.

Key for insert square 7 mm, Zinc black powder-coated.

Key for insert triangular 10 in Zinc black 1004-24 EMKA

€4.10

4,10 € tax excl.

Key for insert triangular 10 mm, Zinc black powder-coated.

Key for insert triangular 7 in Zinc black 1004-03 EMKA

€3.28

3,28 € tax excl.

Key for insert triangular 7 mm, Zinc black powder-coated.

Key for insert triangular 8 in Zinc black 1004-04 Emka

€3.69

3,69 € tax excl.

Key for insert triangular 8 mm, Zinc black powder-coated.

Kit Atim with 4 slides with bearing wheel and accessories for sliding table guide

€105.74

105,74 € tax excl.

Accessory set for sliding guides for the construction of tables or movable surfaces, using the Atim profiles 12.7899591500, 12.7899591600 or 12.7899591900. 23 mm wheels with round groove on 70 mm x 20 mm plate.

L-handle quarter turn for padlock, Stainless steel AISI 316 Emka 1000-U860

€79.90

79,90 € tax excl.

L-handle quarter turn for padlock, Stainless steel AISI 316 Emka 1000-U860

Mina graphite 6 pcs for PCL-3 CMT Tools

€4.34

4,34 € tax excl.

PCL-3B GRAPHITE MINE IDEAL FOR: Paper, Wood, Laminates, Building Material, Artificial Stones and Stones, Metals and Non-Ferrous Metals.

Mina graphite and pastel 6 pcs for PCL-3 CMT Tools

€5.33

5,33 € tax excl.

PCL-3C GRAPHITE AND PASTEL MINE 2 pcs Graphite - 2 pcs Yellow - 2 pcs Red IDEAL FOR: Plastic Materials, Ceramic Materials, Glass, Paper, Wood, Laminates, Building Materials, Artificial Stones and Stones, Metals...

Multi-purpose portable fireplace Q pellet heater

€311.48

311,48 € tax excl.

Product Q is an ultra-modern pellet heater for outdoor use. It is the first of its kind in the world to be heated with wood pellets. The Q is assigned to the device category "outdoor fireplace" and therefore is not...

Multiangle in aluminum coated plastic for Volpato 20 / 20.400 plinth

€1.23

1,23 € tax excl.

Multi-angle 90 ° corner in plastic coated aluminum 21/0950 for Volpato plinth 20 / 20.400 Available height 100mm / 120mm / 150mm

Non-slip mat height 60 cm - Series R1 for kitchen and pantry - at mt

€11.48

11,48 € tax excl.

FEATURES Made of polymer compound Suitable for contact with food Excellent resistance to aging Available colors: White - Gray Measurements as shown in the images: ROLL HEIGHT 60CM - ORDER BY THE METER

Ondulatore per montante metallo Rivit

€150.82

150,82 € tax excl.

Plastic kitchen base under Wind refrigerator for 60 cm cabinet with adjustable feet

€27.05

27,05 € tax excl.

Column base under Fridge Wind 60 cm with side support flap and removable support peg. Complete with adjustable feet kit. The kit includes: 1 underfridge base, 4 adjustable feet from 100 mm to 150 mm, 2 hooks for...

Plastic kitchen base under Wind XL refrigerator for 75 cm cabinet

€36.89

36,89 € tax excl.

Base under Fridge Wind XL for 75 cm base column with side support flap and removable support peg. Complete with adjustable feet. The kit includes: - 1 underfridge base - 6 adjustable feet from 100 mm to 150 mm -...

Plastic plinth covered with Volpato aluminum foil

€24.51

24,51 € tax excl.

Plastic kitchen plinth with aluminum foil coating with coextruded gasket. Total plinth length 4 meters Cut in sections of 2.70 m + 1.29 m Plinth height available 100 mm / 120 mm / 150 mm Please note that...

Plinth in smooth anodized aluminum Volpato. glossy 20 / 10-12-15.400.AL

€72.60

72,60 € tax excl.

Smooth aluminum plinth with semi-concealed gasket Total plinth length 4 meters Cut in sections of 2.70 m + 1.29 m Plinth height available 100 mm / 120 mm / 150 mm Please note that the cuts made are only to...

Protection profile for sheet metal and edges EMKA 1010-01

€6.96

6,96 € tax excl.

Profile for sheet metal and edges PVC 70 ° ± 5 Shore A blackmaterial: PVC 70 ° ± 5 Shore ASurface and color: blackProduct type: edge protectionSeal type: edge protectionThe clamping edge is or up to: 4Clamping edge...

Protection profile for sheet metal and edges EMKA 1010-02 per meter

€4.44

4,44 € tax excl.

Profile for sheet metal and edges PVC 70 ° ± 5 Shore A blackin black PVC 1010-000002 reinforced with metal core

Reduction-increase bushing for 13 / 16 mm stem Cmt

€6.15

6,15 € tax excl.

Adapter bushing ring on cutter shank or tip Specifications: D - 16 mm diameter L - Length 45mm d - Hole Ø 13 mm

Reduction-increase bushing for 6 / 12 mm stem Cmt

€6.15

6,15 € tax excl.

Adapter bushing ring on cutter shank or tip Specifications: D - 12mm diameter L - Length 25mm d - Hole Ø 6 mm

Reduction-increase bushing for 6 / 8 mm stem Cmt

€6.15

6,15 € tax excl.

Adapter bushing ring on cutter shank or tip Specifications: D - 8mm diameter L - Length 25mm d - Hole Ø 6 mm

Reduction-increase bushing for 8 / 12 mm stem Cmt

€6.15

6,15 € tax excl.

Adapter bushing ring on cutter shank or tip Specifications: D - 12mm diameter L - Length 25mm d - Hole Ø 8 mm

Screw-on 180 ° hinge 1039-U15 EMKA in galvanized steel, pin and washer in nickel-plated brass

€20.30

20,30 € tax excl.

Long screwable three-piece 180 ° hinge with 2 holes 8.4 mm in galvanized steel, pin and washer in nickel-plated brass 1039-U15 EMKA Length 91 mm, Height 55 mm

Sealing profile gasket to Z EMKA 1074-04 for glass and sheet metal

€10.66

10,66 € tax excl.

Sealing profile in NBR 80 ° Shore A for 6 mm glass and 2 mm sheet metal, with Z shape for sealing profiles

Set 4 pcs diamond hole saws for drilling with guide and hexagonal adapter 552-501-06 Cmt

€65.57

65,57 € tax excl.

The Set contains: 552-705 Ø 5mm (3/16 ") 552-706 Ø 6mm (1/4 ") 552-708 Ø 8mm (5/16 ") 552-712 Ø 12mm (1/2 ") 552-GUIDE 552-EX14 - HEXAGONAL ADAPTER FOR DRILL BIT

Set 5 cylindrical drill bits for metal TURBO MAX Irwin

€36.07

36,07 € tax excl.

TURBOMAX HSS is mainly designed for high performance drilling of metal sheets; guarantees excellent results even on any type of wood and plastic. Suitable for drilling stainless steel. Plastic box of 5 pieces with...

Set of 3 cutters for making wooden doors 800.527.11 shank 12.7 Cmt

€286.89

286,89 € tax excl.

This set of 3 multifunctional cutters for making entrance and passage doors. Working in conjunction with the tongue and groove cutters, the set allows you to produce reinforced tenons up to 27mm in length with minimal...

Set rabbet with 15 bearings 935.503.11 shank 12 mm CMT

€139.34

139,34 € tax excl.

The complete kit (item code 835-935.503.11), will enable you to produce 17 different rabbet sizes including rabbets for under-sized plywood applications. For rabbet sizes over 12,7mm (1/2”), make the cuts in several...

Slot cutter set 923.001.11 8 mm shank CMT

€188.52

188,52 € tax excl.

This versatile disc cutter set allows you to create decorative effects or functional joints. By varying the combination of disc cutters you can produce channels, steps, tongues and grooves, wood biscuit joints and...

Stainless steel repair plate for hinge hole 35 mm

€1.64

1,64 € tax excl.

Stainless steel plate that allows you to reposition the diameter 35 kitchen hinge if the hole is damaged.

Universal key, Polyamide GF blue 1004-48 EMKA

€2.23

2,23 € tax excl.

Universal key, Polyamide GF blue for insert Double bit 5, Square female 6, Slot, Square 8.

Volpato 50 / 62.420AL rectangular aluminum upstand

€27.87

27,87 € tax excl.

Small rectangular upstand 25x12 mm in aluminum for kitchen tops. Rod length 4.20 meters Cut in sections of 2.00 m + 2.19 m Please note that the cuts made are only to facilitate the transport of the goods, we do...

Volpato 50/61.500AL wave aluminium upstands

€34.34

34,34 € tax excl.

Aluminum upstand for wave profile kitchen top Rod length of 5.00 meters Cut in sections of 2.50 m + 2.49 m Please note that the cuts made are only to facilitate the transport of the goods, we do not make...

Volpato 80 / G11.A90A external corner in aluminum 90 ° for horizontal groove profile 80 / G12.AL

€18.44

18,44 € tax excl.

Volpato 81 / G1.3AT2 external end caps set

€2.57

2,57 € tax excl.

Volpato 81 / G1.3AT2 external end caps set for 80 / G1.3AL drawer horizontal groove profile

Volpato 81 / G1.3AT3 internal end caps set

€2.38

2,38 € tax excl.

Volpato 81 / G1.3AT3 internal end caps set for 80 / G1.3AL drawer horizontal groove profile

Volpato 81 / G1.AT2 external end caps set

€2.57

2,57 € tax excl.

Volpato 81 / G1.AT2 external end caps set for classic horizontal groove profile 80 / G1.2AL

Volpato 81 / G11.AT3 internal end caps set

€2.38

2,38 € tax excl.

Volpato 81 / G1.AT3 internal end caps set for classic horizontal groove profile 80 / G1.2AL

Volpato accessories kit for rectangular upstand

€2.46

2,46 € tax excl.

Accessory kit for upstand 50 / 62.420AL which includes Internal corner External corner Right Cap Left Cap

Volpato Cutlery tray for drawer 30 cm 32/72.N30GR

€5.74

5,74 € tax excl.

Volpato cutlery trays gray for drawer 30 cm 32/72.N30GR, plastic material, produced by injection molding or vacuum forming, eco-friendly, certified for food contact, resistant to scratches. Length 240 mm, depth 490...

Volpato Cutlery tray for drawer 90 cm 32/72.N90GR

€29.55

29,55 € tax excl.

Volpato cutlery trays gray for drawer 90 cm 32/72.N90GR, plastic material, produced by injection molding or vacuum forming, eco-friendly, certified for food contact, resistant to scratches. Length 840 mm, depth 490...

Volpato fixing accessories set for horizontal groove profile

€3.02

3,02 € tax excl.

The set includes: n. 2 fixing brackets cod. 85 / 05G01; n. 4 zinc-plated screws (M4x4) cod. 85/07084; n. 4 screws for chipboard ø3.5x12 cod. 39/07109; n. 4 washers ø12x1 code 85/07502.

Accessory kit for Volpato upstand

€2.46

2,46 € tax excl.

Accessory kit for upstand that includes Internal corner External corner Right Cap Left Cap

EMKA 1001-U30 1001-U31 hook lock

€24.59

24,59 € tax excl.

Hook lock in galvanized steel, hook with return spring (snap movement, also with firm handle).Door version: left or rightHeavy Duty Block: YesSize A: A 20, A 26material: steelSurface and color: galvanizedInstallation...

EMKA 1085-U1 ratchet snap lock

€12.30

12,30 € tax excl.

Snap lock ratchet in galvanized steel.Overlapping spring pinDoor version: right, leftType of blocking system: block-blockType of fixing case: nut fixingmaterial: steelSurface and color: galvanizedInstallation...

EMKA 1091-U97 recessed handle

€6.14

6,14 € tax excl.

Recessed handle in black polyamide, 1091-U97Material: polyamideSurface and color: blackProduct type: handleType of fixing handle: to be fixed with expansion pinsType of handle: pull

Guide bearing for 19x6x6 mm CMT cutter

€5.33

5,33 € tax excl.

Radial ball bearing with seals, replacement for cutter Cmt Article 791.007.00 Specifications: D - 19 mm diameter P - Thickness 6 mm B - Hole Ø 6 mm

K-RUN Pellet outdoor heater

€2,200.00

2.200,00 € tax excl.

K-RUN is an outdoor heater with a very attractive aesthetic, suitable for heating partially closed areas in restaurants, cafes, gardens.

Key for insert square 8 in Zinc black 1004-02 EMKA

€3.28

3,28 € tax excl.

Key for insert square 8 mm, Zinc die black powder-coated.

Load More Products

Showing 1-90 of 110 item(s)

The prices shown are reserved exclusively for online sales

Customer care

Information

STORE INFORMATION

Mancini & Mancini S.r.l
Via Cavour, 18

66020 - Sambuceto, Chieti, Italy
Open: Mon-Fri 8.30am - 12.30am/3.00pm - 6.00pm -

Sat 8.30am - 12.30am

Phone: +39 085.4408697

Email: info@shopmancini.com

Name	Provider	What it does	Expiry	Allow (Check all)
Shopping cart	Prestashop	This provides, and keeps the products inside your shopping cart. Deactivating this cookie would stop permitting the orders. This cookie doesn't save any personal Data about any shop client. This provides, and keeps the products inside your shopping cart. Deactivating this cookie would stop permitting the orders. This cookie doesn't save any personal Data about any shop client.	30 days	Allow
Language Selection.	Prestashop	Cookie we use to offer you the possibility to switch the language of our contents. If cookie is disabled you'll see the site in the original language. Cookie we use to offer you the possibility to switch the language of our contents. If cookie is disabled you'll see the site in the original language.	30 days	Allow

Name	Provider	What it does	Expiry	Allow (Check all)
Stats Data	Prestashop	A Shop Cookie, which saves data about orders, carts, IP of the clients. The data's are kept save inside the back-office, and serve solely as statistical data for improving our services and products. A Shop Cookie, which saves data about orders, carts, IP of the clients. The data's are kept save inside the back-office, and serve solely as statistical data for improving our services and products.	30 days	Allow
Google Analytics	Google	Standard tracking, which make our shop understand the necessity and places to improve our shop. Cookie last for 30 days. Standard tracking, which make our shop understand the necessity and places to improve our shop. Cookie last for 30 days.	30 days	Allow

Home

Necessary

Statistics

Settings

Search

Menu