Click for more products.
No produts were found.
0
Home
Filter By
Filter By
Diameter
Entrance
Weight

  • 0 kg - 7 kg

Brand
Brand

Home

Filter By
Brand: CMT Orange Tools Brand: EMKA Brand: Irwin Tools Brand: Minutex Brand: Prefer Brand: Protool Clear all
EMKA 1056-U27 180° screw-on hinge for door EMKA 1056-U27 180° screw-on hinge for door

60x76 mm 180° screw-on hinge for doors EMKA 1056-U27

€14.75
14,75 € tax excl.
2D screw-on hinge zinc die black powder coated; pin stainless steel. Door position: Hinges for flush doors Installation circumstances: Prominent hinge Hinge adjustable: Hinge adjustable 2D - 2D nut useable...
Black polyamide lock with lever 1000-U675 EMKA Black polyamide lock with lever 1000-U675 EMKA

Black polyamide lock with lever 1000-U675 EMKA

€8.11
8,11 € tax excl.
Black polyamide lock with lever-tab, 1/4 turn locking, nut fixing with flat gasket and self-tapping screw. 18 mm box lock complete with 3 levers (codes: 1000-5164, 1000-U26, 1000-26).
CMT Tools DAF-001 Digital angle finger CMT Tools DAF-001 Digital angle finger

CMT Tools DAF-001 Digital angle finger

€48.36
48,36 € tax excl.
LCD display, when the arm is extended the angle it makes with the base is indicated clearly on digital read-out to the nearest 0,05°. The measuring range is 0 - 360°. The vials allow variations from the vertical and...
EMKA 1011-05 sealing gasket with front rabbet - per meter EMKA 1011-05 sealing gasket with front rabbet - per meter

EMKA 1011-05 sealing gasket with front rabbet - per meter

€7.38
7,38 € tax excl.
Black EPDM gasket (EPDM 65 ° ± 5 Shore A) material: foam rubber EPDM; clamping profile EPDM 65° ± 5 Shore A Surface and colour: black Seal balloon / seal body: Yes Position sealing element: top Product type:...
EMKA 1034-U1 Snap lock galvanized steel EMKA 1034-U1 Snap lock galvanized steel

EMKA 1034-U00001 galvanized steel snap lock only latch

€17.21
17,21 € tax excl.
Snap lock in galvanized steel, tongue and square in rough zamak, spring in galvanized steel.Door version: right, leftType of blocking system: block-blockmaterial: steelSurface and color: galvanizedInstallation...
EMKA 1069-U6 Hinge zinc plated EMKA 1069-U6 Hinge zinc plated

EMKA 1069-U6 Hinge zinc plated

€8.03
8,03 € tax excl.
120° hinge for screw-on fastening for 20 mm door return. Door position: Hinges for prominent doors Arrangement of cabinets: Hinge for single cabinets Installation circumstances: Concealed hinge Opening angle:...
Folding wall ash-tray Folding wall ash-tray

Folding wall ash-tray

€16.31
16,31 € tax excl.
Ashtray to be fixed to the outside wall of offices, institutions and businesses to avoid the dirt of cigarette butts on the ground.The special joint allows, with a simple movement, to empty the cup leaving your hands...
Guide bearing for 12,7x5x4,76 mm CMT cutter Guide bearing for 12,7x5x4,76 mm CMT cutter

Guide bearing for 12,7x5x4,76 mm CMT cutter

€5.25
5,25 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.003.00 Specifications: D - 12,7 mm diameter P - Thickness 5 mm B - Hole Ø 4,76 mm
Guide bearing for 16x5x5mm CMT cutter Guide bearing for 16x5x5mm CMT cutter

Guide bearing for 16x5x5mm CMT cutter

€4.10
4,10 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.006.00 Specifications: D - 16mm diameter P - Thickness 5 mm B - Hole Ø 5 mm
Guide bearing for 19x7x6,35 mm CMT cutter Guide bearing for 19x7x6,35 mm CMT cutter

Guide bearing for 19x7x6,35 mm CMT cutter

€4.92
4,92 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.004.00 Specifications: D - 19 mm diameter P - Thickness 7 mm B - Hole Ø 6,35 mm
Guide bearing for 22x7x8 mm CMT cutter Guide bearing for 22x7x8 mm CMT cutter

Guide bearing for 22x7x8 mm CMT cutter

€5.33
5,33 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.005.00 Specifications: D - 22 mm diameter P - Thickness 7 mm B - Hole Ø 8 mm
Guide bearing for 9,5x3,2x4,76 mm CMT cutter Guide bearing for 9,5x3,2x4,76 mm CMT cutter

Guide bearing for 9,5x3,2x4,76 mm CMT cutter

€5.90
5,90 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.002.00 Specifications: D - 9,5 mm diameter P - Thickness 3,2 mm B - Hole Ø 4,76 mm
Guide rail GRP 800/2, 638188 length 800 mm Protool Guide rail GRP 800/2, 638188 length 800 mm Protool

Guide rail GRP 800/2, 638188 length 800 mm Protool

€79.26
79,26 € tax excl.
Guide Rail 800 mm for plunge saws, Circular Saws, Jigsaws and Routers. Safe and straight guidance of the machine Protects the workpiece surface from damage Coating for smooth machine movement
Prefer 4451.0510 lock for hinged door Prefer 4451.0510 lock for hinged door

Hinged door lock 4451.0510 Prefer

€28.69
28,69 € tax excl.
Rotation 360° left - 2 extractions.Polished chrome plated brass cylinder with pins. Screw fixing.2 keys.Dimensions as per pictures. (L= 8 mm)
Prefer 4451.0510 lock for hinged door Prefer 4451.0510 lock for hinged door

Hinged door lock 4482.2210 Prefer

€30.30
30,30 € tax excl.
180° rotation - 2 pull-outs. Polished chrome plated brass cylinder with pins. Screw fixing. 2 keys. Dimensions as per pictures. (L= 19 mm)
Prefer 4451.0510 lock for hinged door Prefer 4451.0510 lock for hinged door

Hinged door lock 4482.4210 Prefer

€31.21
31,21 € tax excl.
180° rotation - 2 pull-outs. Polished chrome plated brass cylinder with pins. Screw fixing. 2 keys. Dimensions as per pictures. (L= 30 mm)
Irwin TCT cylindrical drill bits metal drilling Irwin TCT cylindrical drill bits metal drilling

Irwin TCT cylindrical drill bits metal drilling

€10.88
10,88 € tax excl.
TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure. Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...
Irwin TURBOMAX HSS multifunction drill bits metal drilling Irwin TURBOMAX HSS multifunction drill bits metal drilling

Irwin TURBOMAX HSS multifunction drill bits metal drilling

€3.26
3,26 € tax excl.
TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...
Kit plate and handles 0433.0800 for Overhead door Prefer Kit plate and handles 0433.0800 for Overhead door Prefer

Kit plate and handles 0433.0800 for Overhead door Prefer

€14.75
14,75 € tax excl.
Features: Black plastic material For locks with shaped cylinder Wheelbase(A) 60 mm Handle height(B) 106 mm Distance between fixing holes(C) 44 mm Distance between fixing holes(H) 144 mm Measures looks image.
Prefer 6014.0010 lock for window rolling shutter Prefer 6014.0010 lock for window rolling shutter

Lock for rolling shutter 6014.0010 Prefer

€20.49
20,49 € tax excl.
Application: on roller shutter blade. Operation: rack and pinion, movement with knob from inside. Finish: galvanised box. Accessories: on request, fixing plate code 0450.0000.0000 - 0450.0040.0000 0450.0050.0000...
Mina graphite 6 pcs for PCL-3 CMT Tools Mina graphite 6 pcs for PCL-3 CMT Tools

Mina graphite 6 pcs for PCL-3 CMT Tools

€4.34
4,34 € tax excl.
PCL-3B GRAPHITE MINE IDEAL FOR: Paper, Wood, Laminates, Building Material, Artificial Stones and Stones, Metals and Non-Ferrous Metals.
Mina graphite and pastel 6 pcs for PCL-3 CMT Tools Mina graphite and pastel 6 pcs for PCL-3 CMT Tools

Mina graphite and pastel 6 pcs for PCL-3 CMT Tools

€5.33
5,33 € tax excl.
PCL-3C GRAPHITE AND PASTEL MINE 2 pcs Graphite - 2 pcs Yellow - 2 pcs Red   IDEAL FOR: Plastic Materials, Ceramic Materials, Glass, Paper, Wood, Laminates, Building Materials, Artificial Stones and Stones, Metals...
Prefer 4451.0510 lock for hinged door Prefer 4451.0510 lock for hinged door

Overhead door lock B551.0810 Prefer

€26.38
26,38 € tax excl.
Application: 1 lock top side Function: For B551-W551 from inside and outside opening with handle, unlocking from outside with key, from inside with lever Finish: normal cylinder brass, lock zinc plated Cylinder Ø...
Prefer B551.0810 locks for overhead garage doors with round cylinder Prefer B551.0810 locks for overhead garage doors with round cylinder

Overhead door lock set B551 + 5520 transit door Prefer

€71.31
71,31 € tax excl.
Application: on up-and-over doors, with transit doors Operation: from inside and outside opening with handle, unlocking from outside with key, from inside with lever Finish: normal brass cylinder, galvanised lock...
Prefer W551.0822 locks for overhead garage doors Prefer W551.0822 locks for overhead garage doors

Overhead door lock W551.0822 Prefer

€29.51
29,51 € tax excl.
Application: 1 lock top side Function: For B551-W551 from inside and outside opening with handle, unlocking from outside with key, from inside with lever Finish: security cylinder sandblasted and nickel-plated,...
Prefer 6751.0802 mortise lock for metal door Prefer 6751.0802 mortise lock for metal door

Prefer 6751.0802 mortise lock for metal door

€30.86
30,86 € tax excl.
Application: for metal transit doors. Operation: handle -operated spring latch, locks from inside and outside with key. Finish: brass cylinder, galvanized case. Square spring latch (2 keys supplied), B= 7 mm...
Prefer 6752.0802 mortise lock for metal door Prefer 6752.0802 mortise lock for metal door

Prefer 6752.0802 mortise lock for metal door

€30.86
30,86 € tax excl.
Application: for metal transit doors. Operation: handle -operated spring latch, locks from inside and outside with key. Finish: brass cylinder, galvanized case. Square spring latch (2 keys supplied), B= 7 mm...
Prefer 6753.0804 mortise lock for metal door Prefer 6753.0804 mortise lock for metal door

Prefer 6753.0804 mortise lock for metal door

€36.68
36,68 € tax excl.
Application: for metal transit doors. Operation: handle -operated spring latch, locks from inside and outside with key. Finish: brass cylinder, galvanized case. Round spring latch (2 keys supplied), B= 11 mm...
Prefer 6754.0804 mortise lock for metal door Prefer 6754.0804 mortise lock for metal door

Prefer 6754.0804 mortise lock for metal door

€33.40
33,40 € tax excl.
Application: for metal transit doors. Operation: handle -operated spring latch, locks from inside and outside with key. Finish: brass cylinder, galvanized case. Round spring latch (2 keys supplied), B= 11 mm...
Protection profile for sheet metal and edges EMKA 1010-01 Protection profile for sheet metal and edges EMKA 1010-01

Protection profile for sheet metal and edges EMKA 1010-01

€6.96
6,96 € tax excl.
Profile for sheet metal and edges PVC 70 ° ± 5 Shore A blackmaterial: PVC 70 ° ± 5 Shore ASurface and color: blackProduct type: edge protectionSeal type: edge protectionThe clamping edge is or up to: 4Clamping edge...
Prefer 6012.0010 lock for window rolling shutter Prefer 6012.0010 lock for window rolling shutter

Roller shutter lock 6012.0010 Prefer

€30.15
30,15 € tax excl.
Application: on roller shutter blade. Operation: by rack, movement both from outside and inside with key. Finish: brass cylinder, galvanised box. Accessories: on request, fixing plate code 0430.0000.0000 -...
Set 5 cylindrical drill bits for metal TURBO MAX Irwin Set 5 cylindrical drill bits for metal TURBO MAX Irwin

Set 5 cylindrical drill bits for metal TURBO MAX Irwin

€36.07
36,07 € tax excl.
TURBOMAX HSS is mainly designed for high performance drilling of metal sheets; guarantees excellent results even on any type of wood and plastic. Suitable for drilling stainless steel. Plastic box of 5 pieces with...
Set rabbet with 15 bearings 935.503.11 shank 12 mm CMT Set rabbet with 15 bearings 935.503.11 shank 12 mm CMT

Set rabbet with 15 bearings 935.503.11 shank 12 mm CMT

€139.34
139,34 € tax excl.
The complete kit (item code 835-935.503.11), will enable you to produce 17 different rabbet sizes including rabbets for under-sized plywood applications. For rabbet sizes over 12,7mm (1/2”), make the cuts in several...
Prefer 2300.3230 lock for sliding door Prefer 2300.3230 lock for sliding door

Sliding door lock 2300.3230 Prefer

€16.39
16,39 € tax excl.
Rotation 90° - push-button operated. Pin cylinder. Black ABS cylinder body. Fork fixing. 2 keys. Dimensions as per pictures. 
Sliding door lock 4281.0010 Prefer Sliding door lock 4281.0010 Prefer

Sliding door lock 4281.0010 Prefer

€25.00
25,00 € tax excl.
360° rotation - 2 pull-outs, open box. Polished chrome plated brass cylinder, with pins. Screw or solder plate fixing. 2 keys. Finish: galvanised box. Dimensions as per pictures. (L= 8 mm)
Slot cutter set 923.001.11 8 mm shank CMT Slot cutter set 923.001.11 8 mm shank CMT

Slot cutter set 923.001.11 8 mm shank CMT

€188.52
188,52 € tax excl.
This versatile disc cutter set allows you to create decorative effects or functional joints. By varying the combination of disc cutters you can produce channels, steps, tongues and grooves, wood biscuit joints and...
EMKA 1001-U30 1001-U31 hook lock EMKA 1001-U30 1001-U31 hook lock

EMKA 1001-U30 1001-U31 hook lock

€24.59
24,59 € tax excl.
Hook lock in galvanized steel, hook with return spring (snap movement, also with firm handle).Door version: left or rightHeavy Duty Block: YesSize A: A 20, A 26material: steelSurface and color: galvanizedInstallation...
EMKA 1085-U1 ratchet snap lock EMKA 1085-U1 ratchet snap lock

EMKA 1085-U1 ratchet snap lock

€12.30
12,30 € tax excl.
Snap lock ratchet in galvanized steel.Overlapping spring pinDoor version: right, leftType of blocking system: block-blockType of fixing case: nut fixingmaterial: steelSurface and color: galvanizedInstallation...
EMKA 1091-U97 recessed handle EMKA 1091-U97 recessed handle

EMKA 1091-U97 recessed handle

€6.14
6,14 € tax excl.
Recessed handle in black polyamide, 1091-U97Material: polyamideSurface and color: blackProduct type: handleType of fixing handle: to be fixed with expansion pinsType of handle: pull
Guide bearing for 19x6x6 mm CMT cutter Guide bearing for 19x6x6 mm CMT cutter

Guide bearing for 19x6x6 mm CMT cutter

€5.33
5,33 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.007.00 Specifications: D - 19 mm diameter P - Thickness 6 mm B - Hole Ø 6 mm
MARKER FOR ARTISANS & PROFESSIONALS PCL-3 CMT Tools MARKER FOR ARTISANS & PROFESSIONALS PCL-3 CMT Tools

MARKER FOR ARTISANS & PROFESSIONALS PCL-3 CMT Tools

€9.75
9,75 € tax excl.
PCL-3 MECHANICAL MARKER FOR DEEP HOLES - Tip length 45mm (Ø5.7mm), to be able to mark hard to reach places. - Button for automatic lead advance with integrated lead sharpener. - Rechargeable front or rear with...
Prefer 5520.0802 mortise lock for metal doors Prefer 5520.0802 mortise lock for metal doors

Mortise lock for metal door 5520.0802 Prefer

€50.57
50,57 € tax excl.
Application: mortise lock for transit doors. Functioning: reversible latch operated by handle, 1-way locking with key. Finishing: brass cylinder, galvanized box. Accessories: handle cod. 0443 A=63 mm B=28 mm...
Load More Products
Showing 1-90 of 101 item(s)

Settings

Click for more products.
No produts were found.

Menu

Please sign in first.

Sign in

Create a free account to use wishlists.

Sign in