Home

Filter

77 QL Lock one throw and hook bolt with cylinder for sliding doors and gates

€29.00

29,00 € tax excl.

FEATURES: Lock (ambivalent to the right and left) with shaped cylinder 22.00.60 Steel front tropicalized 25 mm wide and 211 mm long panel board Inlet size: 60 mm Lock box Base 100 mm x high 130 mm Tropicalized...

Adjustable arm for outward projecting IBFM 340 wasistas window

€12.30

12,30 € tax excl.

Adjustable click arm for wasistas window with outward opening tropicalized steel finish

Adjustable brass-plated cremone bolt mechanism for central locking window with lever

€4.84

4,84 € tax excl.

Small brass-plated adjustable cremone bolt mechanism from window only central locking lever article 173 IBFM

Adjustable click arm for wasistas window IBFM 341 internal opening

€10.66

10,66 € tax excl.

Adjustable click arm for wasistas window with internal opening tropicalized steel finish

Adjustable spacer for mounting 877 iron gratings

€4.10

4,10 € tax excl.

Spacer / spacer diameter 35 mm for grates adjustable from 30 to 40 mm, in galvanized iron, with hole of 14.5 mm IBFM article 877

Adjustable spacer for mounting 878 iron frames with threaded bushing

€0.90

0,90 € tax excl.

Adjustable spacer for assembling iron frames article 878, in galvanized steel + Threaded bushing article 878 / A IBFM article 878 + 878 / A

Aluminum combination deadbolts IBFM 56

€12.30

12,30 € tax excl.

Horizontal round small bolt in black painted aluminum with staple and with exposed fixing screws, and digital combination locking system. To be used in order to lock drawers, cabinets, openings or door leaves....

Amortized wheel with adjustable support for 489 gates

€65.49

65,49 € tax excl.

Amortized wheel with adjustable support for swing gates, easy overlapping type assembly. IBFM article 489 Capacity: 170 Kg

Bolt or bolt with double action lever for metal frames 422

€6.07

6,07 € tax excl.

Double action bolt or bolt in galvanized steel for metal frames for shutters and protected windows, single lever to close the two ways with M8 pitch IBMF article 422

Built-in floor well with dust cap and spring

€1.48

1,48 € tax excl.

Suitable for closing floor lock rods, with protective lock article 475 IBFM Measure = A A - internal hole diameter B - flange width C - well outside diameter A mm 6 8 10 12 14 16 18 20 22...

Cleaner for removing grease from metal Metal Cleaner

€8.18

8,18 € tax excl.

Used as a powerful paint remover. Ready-to-use extra-strong semi-fluid liquid for the removal of grease, sludge and encrustations of carbonized dirt from metal surfaces. Composed of selected and stabilized solvents...

Closing kit for Wasistas windows with 3 m flexible cable code 320

€114.75

114,75 € tax excl.

Complete kit for opening a window: - Crank control - Actuator - Cable - Sheath - Fixing saddle and accessories - Standard cable and sheath length m.3 For window drives on Wasistas always apply a safety arm.

CMT Tools DAF-001 Digital angle finger

€48.36

48,36 € tax excl.

LCD display, when the arm is extended the angle it makes with the base is indicated clearly on digital read-out to the nearest 0,05°. The measuring range is 0 - 360°. The vials allow variations from the vertical and...

Cremone handle with key for window IBFM 565/ZA

€21.31

21,31 € tax excl.

Black painted zamak cremone handle with key, internal rod application for iron window. Key lock for window or frame locking. Available (R) Right - (L) Left. Measures looks image.

Cremonese brass-plated mechanism with windows for rods and central locking

€12.30

12,30 € tax excl.

Cremonese locking mechanism for windows with full 180 ° turn, brass finish, article 169 IBFM

Double action Bommer type spring hinge

€14.75

14,75 € tax excl.

Couple of hinges (the package contains 02 pcs) with automatic double action spring in steel, for Saloon type doors Available sizes: 75 mm - 100 mm - 150 mm Finishes available Black painted steel Nickel...

Filler for marble with Bistuk two-component polyester catalyst

€5.16

5,16 € tax excl.

TWO-COMPONENT POLYESTER STUCCO with high viscosity, specially formulated to glue, repair and plaster marble, granite, stone or travertine.Easy to apply the hardened product is very bright and perfectly polishable....

Guide bearing for 12,7x5x4,76 mm CMT cutter

€5.25

5,25 € tax excl.

Radial ball bearing with seals, replacement for cutter Cmt Article 791.003.00 Specifications: D - 12,7 mm diameter P - Thickness 5 mm B - Hole Ø 4,76 mm

Guide bearing for 16x5x5mm CMT cutter

€4.10

4,10 € tax excl.

Radial ball bearing with seals, replacement for cutter Cmt Article 791.006.00 Specifications: D - 16mm diameter P - Thickness 5 mm B - Hole Ø 5 mm

Guide bearing for 19x7x6,35 mm CMT cutter

€4.92

4,92 € tax excl.

Radial ball bearing with seals, replacement for cutter Cmt Article 791.004.00 Specifications: D - 19 mm diameter P - Thickness 7 mm B - Hole Ø 6,35 mm

Guide bearing for 22x7x8 mm CMT cutter

€5.33

5,33 € tax excl.

Radial ball bearing with seals, replacement for cutter Cmt Article 791.005.00 Specifications: D - 22 mm diameter P - Thickness 7 mm B - Hole Ø 8 mm

Guide bearing for 9,5x3,2x4,76 mm CMT cutter

€5.90

5,90 € tax excl.

Radial ball bearing with seals, replacement for cutter Cmt Article 791.002.00 Specifications: D - 9,5 mm diameter P - Thickness 3,2 mm B - Hole Ø 4,76 mm

Hinge 3 wings with screw covers for heavy fire rated doors with closing spring IBFM 743

€39.93

39,93 € tax excl.

3-wing hinges for heavy and fire rated doors with screwed lid and closing spring. To obtain a greater load capacity it is possible to use more than one pair of hinges, just paying attention to their vertical spacing....

Hinge with screw covers for heavy fire rated doors with closing spring IBFM 743 / M

€53.28

53,28 € tax excl.

Hinges for heavy fire rated doors with 3 wings with screwed lid and closing spring Max load: 2 hinges 150 Kg

IBFM 37 Free-Occupied Deadbolt for bathroom emergency opening

€13.03

13,03 € tax excl.

IBFM Free-Occupied Deadbolt art. 37 for bathroom emergency opening, nickel-plated steel Used in the lever closure of bathroom doors of rooms or trains

Irwin CORDLESS MULTI Series Joran cylindrical drill bits masonry drilling

€3.34

3,34 € tax excl.

CORDLESS MULTI FOR ROTARY DRILLING ONLY - NO HAMMER/PERCUSSION drill bits are ideal for drilling the most common materials, including: brickwork, breeze block, wood, dry wall, slate, plastics, sheet metal. Unique...

Irwin DIAMOND Series Joran cylindrical drill bits masonry drilling

€31.97

31,97 € tax excl.

DIAMOND - COOL WATER - NO PERCUSSION for fast, smooth cutting in all grades of hard and soft tiles. Drilling with water increases the lifespan of the tool. Do not press strongly on the tool, let it work. Make a...

Irwin GRANITE Series Joran cylindrical drill bits masonry-granite drilling

€5.39

5,39 € tax excl.

GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite. Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill bits....

Irwin Series Joran CORDLESS MULTI Set cylindrical drill bits masonry drilling

€18.20

18,20 € tax excl.

CORDLESS MULTI is able of drilling wide selection of materials: brick, marble, metal, tile, slate, gypsum, limestone, hard plastic, wood, cast iron and hardened steel.Plastic box of 5 pieces with bits 4 - 5 - 6 - 8 -...

Irwin Series Joran GRANITE Set cylindrical drill bits masonry-granite drilling

€25.33

25,33 € tax excl.

GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite.Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill...

Irwin Series SPEEDBOR BLUE GROOVE 4X Flat drill bits wood drilling 400mm Long

€9.20

9,20 € tax excl.

BLUE GROOVE 4X Four times faster than the basic flat drill bits double Cutting Spurs scribe outside of the hole, reducing breakout. Thicker Cutting Edge for longer drilling life. Bluegroove Point & Cutting Edge...

Irwin TCT cylindrical drill bits metal drilling

€10.88

10,88 € tax excl.

TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure. Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...

Irwin TURBOMAX HSS multifunction drill bits metal drilling

€3.26

3,26 € tax excl.

TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...

Large type pedal doorstop with rubber 244-245-246

€8.20

8,20 € tax excl.

Pedal doorstop with large rubber type art.244, 245, 246 suitable for locking doors and windows, max load 40 Kg IBFM article 244-245-246

Lever bolt with built-in deadbolt for 420 metal frames

€2.70

2,70 € tax excl.

Recessed bolt to screw for railings, lever bolt for metal frames in galvanized steel IBMF article 420 Front A from 16mm - 20mm - 24mm

Metal lock for mailboxes IBFM filing cabinet 142

€5.74

5,74 € tax excl.

Small lock for mailboxes with 5 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes. Opening...

Metal lock for mailboxes IBFM filing cabinet 143

€5.74

5,74 € tax excl.

Small lock for mailboxes with 12 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes. Opening...

Metallic polyester filler with two-component metal Bistuk catalyst

€4.67

4,67 € tax excl.

BISTUK METAL is a two-component, spatulable polyester putty, to be used on sheet metal, galvanized sheet metal, steel, aluminum, light alloys and fiberglass. Easy to apply and sand, excellent verticability.Product...

Mina graphite 6 pcs for PCL-3 CMT Tools

€4.34

4,34 € tax excl.

PCL-3B GRAPHITE MINE IDEAL FOR: Paper, Wood, Laminates, Building Material, Artificial Stones and Stones, Metals and Non-Ferrous Metals.

Mina graphite and pastel 6 pcs for PCL-3 CMT Tools

€5.33

5,33 € tax excl.

PCL-3C GRAPHITE AND PASTEL MINE 2 pcs Graphite - 2 pcs Yellow - 2 pcs Red IDEAL FOR: Plastic Materials, Ceramic Materials, Glass, Paper, Wood, Laminates, Building Materials, Artificial Stones and Stones, Metals...

Mortice lock 1 throw for aluminum doors and windows 903 K

€35.25

35,25 € tax excl.

FEATURES: Mortice lock for aluminum doors and windows Nickel steel front 16-20 mm wide and 156 mm long panel board Inlet sizes available: 16-21 mm Lock box Base *L mm x height 100 mm Backplate painted nickel...

Mortice lock backing hook bolt and cylinder for aluminum doors and windows 304 K

€17.36

17,36 € tax excl.

FEATURES: Lock (ambivalent to the right and left) with cylinder and 2 keys art. 91.01.75 Nickel steel front 20 mm wide and 160 mm long panel board Inlet size: 20 mm Lock box Base 36,2 mm x high 104 mm Nickel...

Mortice lock tipping bolt and cylinder for aluminum doors and windows 303 K

€42.62

42,62 € tax excl.

FEATURES: Lock (ambivalent to the right and left) with cylinder Nickel steel front 20 mm wide and 160 mm long panel board Inlet size: 20 mm Lock box Base 36,2 mm x high 104 mm Nickel backplate and steel...

Mortice lock with double bitted keys two throws and latch 220

€60.74

60,74 € tax excl.

FEATURES: Lock (ambivalent to the right and left) with reversible latch Brushed lacquered brass front 25 mm wide and 310 mm long panel board Inlet size: 70 mm Lock box Base 113 mm x high 208 mm Bolt 1C

Mortise lock with pin cylinder 1 throw for door 1500 K - Fiam - Iseo

€53.28

53,28 € tax excl.

CHARACTERISTICS: Lock (ambivalent) with cylinder Chromed steel front 21 mm wide and 120 mm long square edge Available entry sizes: 40-50-60-70 mm Box: Base *L mm x Height 57 mm Chromed steel counterplate...

Mortise lock with pin cylinder 4 throws for doors 1300 K - Fiam - Iseo

€40.98

40,98 € tax excl.

CHARACTERISTICS: (Ambivalent) mortise lock with cylinder Satin brass front 22 mm wide and 194 mm long square edge Available entry sizes: 40-50-60-70 mm Box: Base *L mm x Height 110 mm Counterplate in painted...

Pair of single action Bommer type spring hinges

€19.67

19,67 € tax excl.

Pair of Hinge (the package contains 02 pcs.) with automatic simple action spring in steel, hinge used for door closers IBFM article 102 Available sizes: 75mm Door weight for max. 2 hinges 15 Kg 100mm...

Pedal doorstop heavy type with double spring 235

€16.39

16,39 € tax excl.

Pedal doorstop heavy type with double spring, silver painted finish, max load 60 Kg IBFM article 235 SUITABLE FOR HEAVY DOORS

Protective anti-woodworm impregnating fungicide, odorless, colorless Complet Spray

€4.92

4,92 € tax excl.

Medical and Surgical Unit Reg. N ° 18563 and n ° 19765 of the Ministry of Health in conversion to Biocide, according to EU regulation n.528 / 2012 Special formulation for the protection of antique furniture, wooden...

Protective, odorless, colorless anti-woodworm impregnating fungicide Complet

€12.30

12,30 € tax excl.

Reduction-increase bushing for 13 / 16 mm stem Cmt

€6.15

6,15 € tax excl.

Adapter bushing ring on cutter shank or tip Specifications: D - 16 mm diameter L - Length 45mm d - Hole Ø 13 mm

Reduction-increase bushing for 6 / 12 mm stem Cmt

€6.15

6,15 € tax excl.

Adapter bushing ring on cutter shank or tip Specifications: D - 12mm diameter L - Length 25mm d - Hole Ø 6 mm

Reduction-increase bushing for 6 / 8 mm stem Cmt

€6.15

6,15 € tax excl.

Adapter bushing ring on cutter shank or tip Specifications: D - 8mm diameter L - Length 25mm d - Hole Ø 6 mm

Reduction-increase bushing for 8 / 12 mm stem Cmt

€6.15

6,15 € tax excl.

Adapter bushing ring on cutter shank or tip Specifications: D - 12mm diameter L - Length 25mm d - Hole Ø 8 mm

Roller stop for back and forth door in tropicalized steel article 208

€5.66

5,66 € tax excl.

IBFM roller stop for to and fro door in tropicalized steel article 208. It can be used to stop any leaf. Dimensions AxB: 16x100 25x120

Set 4 pcs diamond hole saws for drilling with guide and hexagonal adapter 552-501-06 Cmt

€65.57

65,57 € tax excl.

The Set contains: 552-705 Ø 5mm (3/16 ") 552-706 Ø 6mm (1/4 ") 552-708 Ø 8mm (5/16 ") 552-712 Ø 12mm (1/2 ") 552-GUIDE 552-EX14 - HEXAGONAL ADAPTER FOR DRILL BIT

Set 5 cylindrical drill bits for metal TURBO MAX Irwin

€36.07

36,07 € tax excl.

TURBOMAX HSS is mainly designed for high performance drilling of metal sheets; guarantees excellent results even on any type of wood and plastic. Suitable for drilling stainless steel. Plastic box of 5 pieces with...

Set of 3 cutters for making wooden doors 800.527.11 shank 12.7 Cmt

€286.89

286,89 € tax excl.

This set of 3 multifunctional cutters for making entrance and passage doors. Working in conjunction with the tongue and groove cutters, the set allows you to produce reinforced tenons up to 27mm in length with minimal...

Set rabbet with 15 bearings 935.503.11 shank 12 mm CMT

€139.34

139,34 € tax excl.

The complete kit (item code 835-935.503.11), will enable you to produce 17 different rabbet sizes including rabbets for under-sized plywood applications. For rabbet sizes over 12,7mm (1/2”), make the cuts in several...

Single throw mortise lock with reversible latch for 901 K window frames - Fiam - Iseo

€40.98

40,98 € tax excl.

CHARACTERISTICS: Lock with reversible latch Nickel-plated steel front 16-20 mm wide and 210 mm long square edge Available entry sizes: 16-21 mm Box: Base *L mm x Height 154 mm Nickel-plated steel...

Slot cutter set 923.001.11 8 mm shank CMT

€188.52

188,52 € tax excl.

This versatile disc cutter set allows you to create decorative effects or functional joints. By varying the combination of disc cutters you can produce channels, steps, tongues and grooves, wood biscuit joints and...

Small Cremonese mechanism for window, central locking, mignon 9 mm entry

€4.92

4,92 € tax excl.

Small brass or bronzed Cremonese mechanism closure for window only central closure type Mignon 9 mm entry Article 172 IBFM

Spring hinge for heavy and fire doors with bearing IBFM 443/M

€34.43

34,43 € tax excl.

Max load: 2 hinges 150 Kg Heavy Duty 3D Adjustment Hinge with Ball Bearings Fits Many Profiles. This hinge is suitable for heavy duty doors, security doors, entrance doors, fire and smoke doors. The installation...

Spring of 200 nickel-plated steel door closer article 89

€7.79

7,79 € tax excl.

IBFM door closer spring in nickel-plated steel of 200 mm for doors and leaves in general, simple assembly, max load 40 Kg

Spring wheel with support for gates 489/E

€49.10

49,10 € tax excl.

Article 489/E Spring support wheel for swing gate IBFM article 489/E Capacity: 150 Kg

Thermowell or bushing for flanged floor

€0.82

0,82 € tax excl.

Douille ou douille encastrée pour planchers à rebord laiton ou nickelé Article 474 de l'IBFM Available measures: A mm 6 8 10 12 14 16 18 20 22 B mm 14 18 20 22 25 28 30 32 32 C mm...

Two-component polyester filler for wood + catalyst - Bistuk Wood

€6.56

6,56 € tax excl.

BISTUK WOOD is a two-component, spatulable polyester putty, formulated for grouting and finishing on wood, restoring missing parts, knots and edges. Easy to apply and sand, excellent verticability. Can be painted over...

Universal key for control panel and road cabinet IBFM 028

€2.87

2,87 € tax excl.

Universal key in zamak for control unit, panel, street cabinet and water/gas boxes. Key for insert double bit 5 mm, square insert 6 - 8 mm and triangular insert 8,5 mm. Measures looks image.

50mm padlock with 184mm long adjustable arch 2250 / RLS

€10.57

10,57 € tax excl.

50mm padlock with adjustable long arch. Complete with 2 keys. Measurements as shown in the images.

Closing coordinator for double leaf doors IBFM 136

€24.59

24,59 € tax excl.

Closing coordinator for double leaf doors in black painted iron. Measurements as shown in the images.

Guide arm with stop for bottom hinged windows 347

€4.10

4,10 € tax excl.

Guide for latch for wasistas windows with bent strike, total arm size 19 cm (arm 18 only) sliding slot 14 cm base attacks 2.5x2.5 and 3.3x2.5 cm IBMF article 347 FINISHES: Tropicalized steel Bronzed Steel

Guide bearing for 19x6x6 mm CMT cutter

€5.33

5,33 € tax excl.

Radial ball bearing with seals, replacement for cutter Cmt Article 791.007.00 Specifications: D - 19 mm diameter P - Thickness 6 mm B - Hole Ø 6 mm

Hinge for heavy and fire doors with IBFM 442 bearing

€22.55

22,55 € tax excl.

Hinges for heavy and fire doors with 2-wing bearing to screw on doors Max load: 2 hinges 80 Kg

Hinge for heavy and fire doors with IBFM 443 bearing

€31.97

31,97 € tax excl.

Hinges for heavy and fire rated doors with 3-wing bearing to screw on doors Max load: 2 hinges 150 Kg

Hinge for heavy fire rated doors with closing spring IBFM 543 / M

€35.98

35,98 € tax excl.

3-wing hinges for heavy and fire rated doors, round type with closing spring Max load: 2 hinges 160 Kg

ISEO universal electric lock to apply for Gates 52N515

€45.90

45,90 € tax excl.

Strengths: New and modern design Adjustable entry: 50, 60, 70 and 80 mm Right and left reversible, excluding the version with deadbolt: the lock can be turned over with a few quick settings Multifunction: with...

Lockable lever lock closure for cabinets or furniture doors

€4.92

4,92 € tax excl.

Lockable lever lock closure for cabinets or furniture doors, IBFM art. 153 Usable with 19 mm drilling

MARKER FOR ARTISANS & PROFESSIONALS PCL-3 CMT Tools

€9.75

9,75 € tax excl.

PCL-3 MECHANICAL MARKER FOR DEEP HOLES - Tip length 45mm (Ø5.7mm), to be able to mark hard to reach places. - Button for automatic lead advance with integrated lead sharpener. - Rechargeable front or rear with...

Marker Kit for artisans and professionals PCL-3 CMT Tools with 12 mines

€18.03

18,03 € tax excl.

PACKAGE WITH: PCL-3 MECHANICAL MARKER FOR DEEP HOLES WITH PCL-3B GRAPHITE MINE KIT AND PCL-3C PASTEL GRAPHITE MINE KIT

Pair of adjustable clamps for CFC-002 CMT Tools joints

€28.69

28,69 € tax excl.

Size 100x100x32 With these clamps you can easily make perfect 90 ° or T joints (for shelves, cabinets, frames, etc.), using boards of variable thickness from 6 to 25.4 mm (1/4 "- 1"). Using these clamps you will...

Pedal doorstop small type with rubber 242-243

€4.84

4,84 € tax excl.

Pedal doorstop with small rubber type art.242 or 243, suitable for locking doors and windows, max load 40 Kg IBFM article 242-243

1320 K Mortice locks with cylinder and latch four throws for doors

€61.23

61,23 € tax excl.

FEATURES: Lock (ambivalent) mortise cylinder and latch Satin brass front 25 mm wide and 245 mm long panel board Inlet sizes available: 40-50-60-70 mm Lock box Base (changes with the variation of the Inlet) mm x...

76 Mortice locks with roller and one throws

€27.93

27,93 € tax excl.

FEATURES: Lock (ambivalent) mortise cylinder and roller Painted brass front 21 mm wide and 157 mm long panel board Inlet sizes available: 50-60 mm Lock box Base (changes with the variation of the Inlet) mm x...

77 QL-INOX Lock one throw and hook bolt with cylinder for sliding doors and gates

€41.56

41,56 € tax excl.

FEATURES: Lock (ambivalent to the right and left) with shaped cylinder 22.00.60 Stainless steel front 25 mm wide and 211 mm long panel board Inlet size: 60 mm Lock box Base 100 mm x high 130 mm Stainless...

Cremonesi mechanism with threaded holes at half turn 90 ° brass-plated art.165

€4.10

4,10 € tax excl.

EGI 381 Electric mortice lock with hook and cylinder for sliding doors and gates

€163.93

163,93 € tax excl.

FEATURES: Mortice lock(Ambivalent to the right and left)with cylinder art. 22.00.60 Square front galvanized steel 30 mm wide and 192 mm long Inlet size: 90 mm Lock box Base 140 mm high x 109 mm Backplate and 3...

EGR 380 Electric rim lock with hook for sliding doors and gates

€163.11

163,11 € tax excl.

FEATURES: Lock Right 380.90.01 and Left 380.90.02 Double external fixed cylinder length 50 mm Inlet size: 90 mm Lock box Base 144 mm high x 112 mm Backplate and 3 keys included Hook nickel steel Function...

Mortice lock 1 throw and adjustable roller for aluminum doors and windows 902 K

€40.16

40,16 € tax excl.

FEATURES: Mortice lock with adjustable roller Nickel steel front 16-20 mm wide and 210 mm long panel board Inlet sizes available: 16-21 mm Lock box Base *L mm x height 154 mm Backplate painted nickel steel 1...

Mortice lock cylinder 3 throws and latch 463N

€87.70

87,70 € tax excl.

FEATURES: Lock zinc-plated 3 locking points(ambivalent to the right and left) with cylinder Chrome steel front 25 mm wide and 350 mm long panel board Inlet size: 60 mm Lock box Base 123 mm x high 208 mm...

Mortice lock with double bitted keys two throws and latch three locking points 223

€67.62

67,62 € tax excl.

FEATURES: Lock (ambivalent to the right and left) with reversible latch and threelocking points Brushed lacquered brass front 25 mm wide and 310 mm long panel board Inlet size: 70 mm Lock box Base 113 mm x high...

Load More Products

Showing 1-90 of 92 item(s)

The prices shown are reserved exclusively for online sales

Customer care

Information

STORE INFORMATION

Mancini & Mancini S.r.l
Via Cavour, 18

66020 - Sambuceto, Chieti, Italy
Open: Mon-Fri 8.30am - 12.30am/3.00pm - 6.00pm -

Sat 8.30am - 12.30am

Phone: +39 085.4408697

Email: info@shopmancini.com

Name	Provider	What it does	Expiry	Allow (Check all)
Shopping cart	Prestashop	This provides, and keeps the products inside your shopping cart. Deactivating this cookie would stop permitting the orders. This cookie doesn't save any personal Data about any shop client. This provides, and keeps the products inside your shopping cart. Deactivating this cookie would stop permitting the orders. This cookie doesn't save any personal Data about any shop client.	30 days	Allow
Language Selection.	Prestashop	Cookie we use to offer you the possibility to switch the language of our contents. If cookie is disabled you'll see the site in the original language. Cookie we use to offer you the possibility to switch the language of our contents. If cookie is disabled you'll see the site in the original language.	30 days	Allow

Name	Provider	What it does	Expiry	Allow (Check all)
Stats Data	Prestashop	A Shop Cookie, which saves data about orders, carts, IP of the clients. The data's are kept save inside the back-office, and serve solely as statistical data for improving our services and products. A Shop Cookie, which saves data about orders, carts, IP of the clients. The data's are kept save inside the back-office, and serve solely as statistical data for improving our services and products.	30 days	Allow
Google Analytics	Google	Standard tracking, which make our shop understand the necessity and places to improve our shop. Cookie last for 30 days. Standard tracking, which make our shop understand the necessity and places to improve our shop. Cookie last for 30 days.	30 days	Allow

Home

Necessary

Statistics

Settings

Search

Menu