€12.30
12,30 € tax excl.
Adjustable click arm for wasistas window with outward opening
tropicalized steel finish
Filter By
Filter By
Home
Filter By
€4.84
4,84 € tax excl.
Small brass-plated adjustable cremone bolt mechanism from window only central locking lever
article 173 IBFM
€10.66
10,66 € tax excl.
Adjustable click arm for wasistas window with internal opening
tropicalized steel finish
€4.10
4,10 € tax excl.
Spacer / spacer diameter 35 mm for grates adjustable from 30 to 40 mm, in galvanized iron, with hole of 14.5 mm
IBFM article 877
€0.90
0,90 € tax excl.
Adjustable spacer for assembling iron frames article 878, in galvanized steel + Threaded bushing article 878 / A
IBFM article 878 + 878 / A
€12.30
12,30 € tax excl.
Horizontal round small bolt in black painted aluminum with staple and with exposed fixing screws, and digital combination locking system. To be used in order to lock drawers, cabinets, openings or door leaves....
€65.49
65,49 € tax excl.
Amortized wheel with adjustable support for swing gates, easy overlapping type assembly.
IBFM article 489
Capacity: 170 Kg
€12.30
12,30 € tax excl.
Shutter holder with black painted arm (L) 284 mm with point Ø 8 mm. Plate for resting position and rubber cable guide.
Available (R) Right - (L) Left.
Supplied accessories:
Plate-Striker
Nylon socket
Measures...
€6.07
6,07 € tax excl.
Double action bolt or bolt in galvanized steel for metal frames for shutters and protected windows, single lever to close the two ways with M8 pitch
IBMF article 422
€1.48
1,48 € tax excl.
Suitable for closing floor lock rods, with protective lock article 475 IBFM
Measure = A
A - internal hole diameter
B - flange width
C - well outside diameter
A mm
6
8
10
12
14
16
18
20
22...
€8.18
8,18 € tax excl.
Used as a powerful paint remover.
Ready-to-use extra-strong semi-fluid liquid for the removal of grease, sludge and encrustations of carbonized dirt from metal surfaces.
Composed of selected and stabilized solvents...
€114.75
114,75 € tax excl.
Complete kit for opening a window:
- Crank control
- Actuator
- Cable
- Sheath
- Fixing saddle and accessories
- Standard cable and sheath length m.3
For window drives on Wasistas always apply a safety arm.
€48.36
48,36 € tax excl.
LCD display, when the arm is extended the angle it makes with the base is indicated clearly on digital read-out to the nearest 0,05°. The measuring range is 0 - 360°. The vials allow variations from the vertical and...
€21.31
21,31 € tax excl.
Black painted zamak cremone handle with key, internal rod application for iron window.
Key lock for window or frame locking.
Available (R) Right - (L) Left.
Measures looks image.
€12.30
12,30 € tax excl.
Cremonese locking mechanism for windows with full 180 ° turn,
brass finish,
article 169 IBFM
€2.46
2,46 € tax excl.
Cushioned black nylon stop for shutter holder.
Suitable for Komodo shutter opener.
Measures looks image.
€14.75
14,75 € tax excl.
Couple of hinges (the package contains 02 pcs) with automatic double action spring in steel, for Saloon type doors
Available sizes: 75 mm - 100 mm - 150 mm
Finishes available
Black painted steel
Nickel...
€5.16
5,16 € tax excl.
TWO-COMPONENT POLYESTER STUCCO with high viscosity, specially formulated to glue, repair and plaster marble, granite, stone or travertine.Easy to apply the hardened product is very bright and perfectly polishable....
€5.25
5,25 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.003.00
Specifications:
D - 12,7 mm diameter
P - Thickness 5 mm
B - Hole Ø 4,76 mm
€4.10
4,10 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.006.00
Specifications:
D - 16mm diameter
P - Thickness 5 mm
B - Hole Ø 5 mm
€4.92
4,92 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.004.00
Specifications:
D - 19 mm diameter
P - Thickness 7 mm
B - Hole Ø 6,35 mm
€5.33
5,33 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.005.00
Specifications:
D - 22 mm diameter
P - Thickness 7 mm
B - Hole Ø 8 mm
€5.90
5,90 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.002.00
Specifications:
D - 9,5 mm diameter
P - Thickness 3,2 mm
B - Hole Ø 4,76 mm
€39.93
39,93 € tax excl.
3-wing hinges for heavy and fire rated doors with screwed lid and closing spring. To obtain a greater load capacity it is possible to use more than one pair of hinges, just paying attention to their vertical spacing....
€53.28
53,28 € tax excl.
Hinges for heavy fire rated doors with 3 wings with screwed lid and closing spring
Max load: 2 hinges 150 Kg
€13.03
13,03 € tax excl.
IBFM Free-Occupied Deadbolt art. 37 for bathroom emergency opening, nickel-plated steel
Used in the lever closure of bathroom doors of rooms or trains
€3.34
3,34 € tax excl.
CORDLESS MULTI FOR ROTARY DRILLING ONLY - NO HAMMER/PERCUSSION drill bits are ideal for drilling the most common materials, including: brickwork, breeze block, wood, dry wall, slate, plastics, sheet metal. Unique...
€31.97
31,97 € tax excl.
DIAMOND - COOL WATER - NO PERCUSSION for fast, smooth cutting in all grades of hard and soft tiles.
Drilling with water increases the lifespan of the tool. Do not press strongly on the tool, let it work. Make a...
€5.39
5,39 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite. Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill bits....
€18.20
18,20 € tax excl.
CORDLESS MULTI is able of drilling wide selection of materials: brick, marble, metal, tile, slate, gypsum, limestone, hard plastic, wood, cast iron and hardened steel.Plastic box of 5 pieces with bits 4 - 5 - 6 - 8 -...
€25.33
25,33 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite.Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill...
€9.20
9,20 € tax excl.
BLUE GROOVE 4X Four times faster than the basic flat drill bits double Cutting Spurs scribe outside of the hole, reducing breakout.
Thicker Cutting Edge for longer drilling life. Bluegroove Point & Cutting Edge...
€10.88
10,88 € tax excl.
TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure.
Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...
€3.26
3,26 € tax excl.
TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...
€150.00
150,00 € tax excl.
MECHANISM to OPEN and CLOSE the SHUTTERS from INSIDE Komodo®
Modern system with integrated clutch that allows you to open, close, and lock shutters from inside without opening the window. Ideal when sinks, furniture,...
€8.20
8,20 € tax excl.
Pedal doorstop with large rubber type art.244, 245, 246 suitable for locking doors and windows, max load 40 Kg
IBFM article 244-245-246
€2.70
2,70 € tax excl.
Recessed bolt to screw for railings, lever bolt for metal frames in galvanized steel
IBMF article 420
Front A
from 16mm - 20mm - 24mm
€5.74
5,74 € tax excl.
Small lock for mailboxes with 5 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes.
Opening...
€5.74
5,74 € tax excl.
Small lock for mailboxes with 12 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes.
Opening...
€4.67
4,67 € tax excl.
BISTUK METAL is a two-component, spatulable polyester putty, to be used on sheet metal, galvanized sheet metal, steel, aluminum, light alloys and fiberglass. Easy to apply and sand, excellent verticability.Product...
€4.34
4,34 € tax excl.
PCL-3B GRAPHITE MINE
IDEAL FOR: Paper, Wood, Laminates, Building Material, Artificial Stones and Stones, Metals and Non-Ferrous Metals.
€5.33
5,33 € tax excl.
PCL-3C GRAPHITE AND PASTEL MINE
2 pcs Graphite - 2 pcs Yellow - 2 pcs Red
IDEAL FOR: Plastic Materials, Ceramic Materials, Glass, Paper, Wood, Laminates, Building Materials, Artificial Stones and Stones, Metals...
€19.67
19,67 € tax excl.
Pair of Hinge (the package contains 02 pcs.) with automatic simple action spring in steel, hinge used for door closers
IBFM article 102
Available sizes:
75mm
Door weight for max. 2 hinges 15 Kg
100mm...
€16.39
16,39 € tax excl.
Pedal doorstop heavy type with double spring, silver painted finish, max load 60 Kg
IBFM article 235
SUITABLE FOR HEAVY DOORS
€4.92
4,92 € tax excl.
Medical and Surgical Unit Reg. N ° 18563 and n ° 19765 of the Ministry of Health in conversion to Biocide, according to EU regulation n.528 / 2012
Special formulation for the protection of antique furniture, wooden...
€12.30
12,30 € tax excl.
Medical and Surgical Unit Reg. N ° 18563 and n ° 19765 of the Ministry of Health in conversion to Biocide, according to EU regulation n.528 / 2012
Special formulation for the protection of antique furniture, wooden...
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 16 mm diameter
L - Length 45mm
d - Hole Ø 13 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 12mm diameter
L - Length 25mm
d - Hole Ø 6 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 8mm diameter
L - Length 25mm
d - Hole Ø 6 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 12mm diameter
L - Length 25mm
d - Hole Ø 8 mm
€5.66
5,66 € tax excl.
IBFM roller stop for to and fro door in tropicalized steel article 208.
It can be used to stop any leaf.
Dimensions AxB:
16x100
25x120
€65.57
65,57 € tax excl.
The Set contains:
552-705 Ø 5mm (3/16 ")
552-706 Ø 6mm (1/4 ")
552-708 Ø 8mm (5/16 ")
552-712 Ø 12mm (1/2 ")
552-GUIDE
552-EX14 - HEXAGONAL ADAPTER FOR DRILL BIT
€36.07
36,07 € tax excl.
TURBOMAX HSS is mainly designed for high performance drilling of metal sheets; guarantees excellent results even on any type of wood and plastic. Suitable for drilling stainless steel.
Plastic box of 5 pieces with...
€286.89
286,89 € tax excl.
This set of 3 multifunctional cutters for making entrance and passage doors. Working in conjunction with the tongue and groove cutters, the set allows you to produce reinforced tenons up to 27mm in length with minimal...
€139.34
139,34 € tax excl.
The complete kit (item code 835-935.503.11), will enable you to produce 17 different rabbet sizes including rabbets for under-sized plywood applications.
For rabbet sizes over 12,7mm (1/2”), make the cuts in several...
€188.52
188,52 € tax excl.
This versatile disc cutter set allows you to create decorative effects or functional joints. By varying the combination of disc cutters you can produce channels, steps, tongues and grooves, wood biscuit joints and...
€4.92
4,92 € tax excl.
Small brass or bronzed Cremonese mechanism closure for window only central closure type Mignon 9 mm entry
Article 172 IBFM
€34.43
34,43 € tax excl.
Max load: 2 hinges 150 Kg
Heavy Duty 3D Adjustment Hinge with Ball Bearings Fits Many Profiles. This hinge is suitable for heavy duty doors, security doors, entrance doors, fire and smoke doors.
The installation...
€7.79
7,79 € tax excl.
IBFM door closer spring in nickel-plated steel of 200 mm for doors and leaves in general, simple assembly, max load 40 Kg
€49.10
49,10 € tax excl.
Article 489/E
Spring support wheel for swing gate
IBFM article 489/E
Capacity: 150 Kg
€0.82
0,82 € tax excl.
Douille ou douille encastrée pour planchers à rebord
laiton ou nickelé
Article 474 de l'IBFM
Available measures:
A mm
6
8
10
12
14
16
18
20
22
B mm
14
18
20
22
25
28
30
32
32
C mm...
€4.92
4,92 € tax excl.
Automatic shutter holder nylon 40/52 3094T89
Made of technical plastic this SHUTTER HOLDER (ACA) is : strong, adjustable, can be cut when needed, equiped with a stainless steel spring to absord shocks and vibration...
€4.10
4,10 € tax excl.
Closing handle for folding shutters 9204016
Durable and practical Closing handle Torbel for folding shutters, easy to assemble.
Closing handle universal, since locks on all thresholds. UV-resistant and frost.
Black...
€23.90
23,90 € tax excl.
Handle for shutters and sliding sunblind B025541J
Color BLACK.
€5.90
5,90 € tax excl.
Leaf shutter holder S4000 plastic 12/76 94PA446
Scracth-resistant leaf, higt resistance, easy to adjust, shock absorber with rubber covering.
Color BLACK.
€32.79
32,79 € tax excl.
Lock for sliding window H0PDM3J
Functions as bolt and as half-opener
Locking by pressing the pin
Unlocking by turning the key
Rubeer protection cover
Reversible, fixing possible right or left
Color black....
€71.31
71,31 € tax excl.
Locking bolt for door with wheel 9565016
Avoid lowering the shutter
Load capacity 65 kg
Stroke 12 min, 54 max
Color black.
Measures looks image.
€21.31
21,31 € tax excl.
Maxi magnetic shutter stop for gate, color Gray 161330
Magnet force 20 kg
Concealed screws
For outdoor installations
Fixing to the ground or to the wall
Ideal for pedestrian and driveway gates
Measures looks...
€39.34
39,34 € tax excl.
Maxi magnetic shutter stop for gate, color Gray 161340
Magnet force 35 kg
Concealed screws
For outdoor installations
Fixing to the ground or to the wall
Ideal for pedestrian and driveway gates
Measures looks...
€13.11
13,11 € tax excl.
Self-leveling oval magnet shutter stop 2 pieces 94PAF7
Magnet force 5 kg
Concealed screws
Fixing with 4.2 mm standard screws or with 7.5 mm concrete wall screws
Available black and white color.
Measures looks...
€4.10
4,10 € tax excl.
Self-locking for garden door 9206691
Galvanized white.
€34.40
34,40 € tax excl.
Shutter holder on hook 7703103
It suits an Any type of shutter or scurone, wood, aluminum or PVC.Weatherproof: plastic polymers fact undergo a special treatment anti-UV.
LENGTH (L) 463 mm, BLACK color .
€10.66
10,66 € tax excl.
Universal shutter spring holder 9470I7
It suits an Any type of shutter or scurone, wood, aluminum or PVC.Weatherproof: plastic polymers fact undergo a special treatment anti-UV and extendable arm D.12 is...
€10.66
10,66 € tax excl.
Universal shutter spring holder 9470I757
It suits an Any type of shutter or scurone, wood, aluminum or PVC.Weatherproof: plastic polymers fact undergo a special treatment anti-UV and extendable arm D.12 is...
€6.56
6,56 € tax excl.
BISTUK WOOD is a two-component, spatulable polyester putty, formulated for grouting and finishing on wood, restoring missing parts, knots and edges. Easy to apply and sand, excellent verticability. Can be painted over...
€2.87
2,87 € tax excl.
Universal key in zamak for control unit, panel, street cabinet and water/gas boxes.
Key for insert double bit 5 mm, square insert 6 - 8 mm and triangular insert 8,5 mm.
Measures looks image.
€10.57
10,57 € tax excl.
50mm padlock with adjustable long arch.
Complete with 2 keys.
Measurements as shown in the images.
€24.59
24,59 € tax excl.
Closing coordinator for double leaf doors in black painted iron.
Measurements as shown in the images.
€4.10
4,10 € tax excl.
Guide for latch for wasistas windows with bent strike, total arm size 19 cm (arm 18 only)
sliding slot 14 cm
base attacks 2.5x2.5 and 3.3x2.5 cm
IBMF article 347
FINISHES:
Tropicalized steel
Bronzed Steel
€5.33
5,33 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.007.00
Specifications:
D - 19 mm diameter
P - Thickness 6 mm
B - Hole Ø 6 mm
€22.55
22,55 € tax excl.
Hinges for heavy and fire doors with 2-wing bearing
to screw on doors
Max load: 2 hinges 80 Kg
€31.97
31,97 € tax excl.
Hinges for heavy and fire rated doors with 3-wing bearing
to screw on doors
Max load: 2 hinges 150 Kg
€35.98
35,98 € tax excl.
3-wing hinges for heavy and fire rated doors, round type with closing spring
Max load: 2 hinges 160 Kg
€4.92
4,92 € tax excl.
Lockable lever lock closure for cabinets or furniture doors, IBFM art. 153
Usable with 19 mm drilling
€9.75
9,75 € tax excl.
PCL-3 MECHANICAL MARKER FOR DEEP HOLES
- Tip length 45mm (Ø5.7mm), to be able to mark hard to reach places.
- Button for automatic lead advance with integrated lead sharpener.
- Rechargeable front or rear with...
€18.03
18,03 € tax excl.
PACKAGE WITH:
PCL-3 MECHANICAL MARKER FOR DEEP HOLES WITH PCL-3B GRAPHITE MINE KIT AND PCL-3C PASTEL GRAPHITE MINE KIT
€28.69
28,69 € tax excl.
Size 100x100x32
With these clamps you can easily make perfect 90 ° or T joints (for shelves, cabinets, frames, etc.), using boards of variable thickness from 6 to 25.4 mm (1/4 "- 1").
Using these clamps you will...
€4.84
4,84 € tax excl.
Pedal doorstop with small rubber type art.242 or 243, suitable for locking doors and windows, max load 40 Kg
IBFM article 242-243
Out-of-StockSold out
€4.10
4,10 € tax excl.
Showing 1-89 of 89 item(s)
Italiano
Français
Deutsch
Español