€12.30
12,30 € tax excl.
Adjustable click arm for wasistas window with outward opening
tropicalized steel finish
Filter By
Filter By
Home
Filter By
€4.84
4,84 € tax excl.
Small brass-plated adjustable cremone bolt mechanism from window only central locking lever
article 173 IBFM
€10.66
10,66 € tax excl.
Adjustable click arm for wasistas window with internal opening
tropicalized steel finish
€4.10
4,10 € tax excl.
Spacer / spacer diameter 35 mm for grates adjustable from 30 to 40 mm, in galvanized iron, with hole of 14.5 mm
IBFM article 877
€0.90
0,90 € tax excl.
Adjustable spacer for assembling iron frames article 878, in galvanized steel + Threaded bushing article 878 / A
IBFM article 878 + 878 / A
€12.30
12,30 € tax excl.
Horizontal round small bolt in black painted aluminum with staple and with exposed fixing screws, and digital combination locking system. To be used in order to lock drawers, cabinets, openings or door leaves....
€65.49
65,49 € tax excl.
Amortized wheel with adjustable support for swing gates, easy overlapping type assembly.
IBFM article 489
Capacity: 170 Kg
€327.87
327,87 € tax excl.
Built-in corner sink with 2 basin and drainer.
Features:
Glossy black finish
Dimensions 830x830x500 mm
Weight 14 Kg
Supplied without mixer tap.
Measures looks image.
€6.07
6,07 € tax excl.
Double action bolt or bolt in galvanized steel for metal frames for shutters and protected windows, single lever to close the two ways with M8 pitch
IBMF article 422
€1.48
1,48 € tax excl.
Suitable for closing floor lock rods, with protective lock article 475 IBFM
Measure = A
A - internal hole diameter
B - flange width
C - well outside diameter
A mm
6
8
10
12
14
16
18
20
22...
€114.75
114,75 € tax excl.
Complete kit for opening a window:
- Crank control
- Actuator
- Cable
- Sheath
- Fixing saddle and accessories
- Standard cable and sheath length m.3
For window drives on Wasistas always apply a safety arm.
€48.36
48,36 € tax excl.
LCD display, when the arm is extended the angle it makes with the base is indicated clearly on digital read-out to the nearest 0,05°. The measuring range is 0 - 360°. The vials allow variations from the vertical and...
€21.31
21,31 € tax excl.
Black painted zamak cremone handle with key, internal rod application for iron window.
Key lock for window or frame locking.
Available (R) Right - (L) Left.
Measures looks image.
€12.30
12,30 € tax excl.
Cremonese locking mechanism for windows with full 180 ° turn,
brass finish,
article 169 IBFM
€16.39
16,39 € tax excl.
Brass Cremonese for Ghidini Milena window frames
Available finishes: Polished painted brass - Satin chromed brass - Painted designer brass - Polished chromed brass
€10.66
10,66 € tax excl.
Satin brass window handle with bronze finish, gratz mechanism with holes and 7 mm spindle
€9.84
9,84 € tax excl.
Satin brass window handle with bronze finish, gratz mechanism with holes.
€29.51
29,51 € tax excl.
2 large gusseted front pockets, coin pocket, side pocket for tools, multi-functional side pocket with mobile phone holder and detacheable badge holder, 2 back pockets, one with zip, hammer loop.
Stretch insert at hip...
€19.67
19,67 € tax excl.
Aluminum handle with compass for window and frames. Powder coating.
Available colors:
Silver anodized (F1)
Champagne anodized (F2)
Gold anodized (F3)
Anodized bronze (F4)
Polished Brass (GCTOL)...
€14.75
14,75 € tax excl.
Couple of hinges (the package contains 02 pcs) with automatic double action spring in steel, for Saloon type doors
Available sizes: 75 mm - 100 mm - 150 mm
Finishes available
Black painted steel
Nickel...
€14.80
14,80 € tax excl.
Enzyme and not solvent-based bug remover: safe on PPF, coatings, plastic trims etc. Cleaner with added proteolytic Enzymes which can quickly and safely breakdown dissolve proteins from bugs and other bio contents,...
€21.36
21,36 € tax excl.
All-In-One product that combines foam cleaner and water-repellent Si02 coating together that is appliedwith a foam lance.
€22.58
22,58 € tax excl.
All-In-One product that combines foam cleaner and water-repellent Si02 coating together that is applied by bucket washing.
€16.52
16,52 € tax excl.
New Nappa Coat is a deep nourishing leather conditioner that leaves the leather feeling soft to the touch while providing excellent dirt, dust, water and UV repellency. It also contains SiO2 which provides some added...
€20.14
20,14 € tax excl.
When detailing a car, the overall look is not truly finished until each surface has been washed and protected. Fireball Ultimate Trim & Tire provides a gloss finish that repels dirt and water for a long-lasting clean...
€16.44
16,44 € tax excl.
Milena 45x9 mm free/busy latch for bathroom WC doors 6x6 square
Available finishes: Polished painted brass - Satin chromed brass - Scratched painted brass - Polished chromed brass
Measurements as per pictures.
Ghidini Handle Garage doors cylinder hole Ø 25 mm, centre distance 67 mm moved, Kit CIL D25 INT67 SP
€24.51
24,51 € tax excl.
Tilting kit with cylinder hole Ø 25mm wheelbase 67mm offset for Garage.
Available colors:
Silver anodized (F1)
Anodized bronze (F4)
Polished Brass (GCTOL)
Satin Brass (GCTOS)
Polished Chrome (GCTCL)...
€22.95
22,95 € tax excl.
Door handle with plate
Available finishes: Polished painted brass - Satin chromed brass - Scratched bronze painted brass - Polished chromed brass
Available wheelbases: 7 cm - 8.5 cm (Yale hole) - 9 cm
€9.84
9,84 € tax excl.
Brass hammer for window and door frames with 7 mm square mechanism
Available finishes: Polished painted brass - Satin chromed brass - Painted designer brass - Polished chromed brass
€42.95
42,95 € tax excl.
Mignon bulky handle in zama with square rosette and patent square escutcheon for Q8 doors
Available finishes: satin chrome - polished chrome
€28.69
28,69 € tax excl.
Zama handle with square rosette and patent square escutcheon for Q8 doors
Available finishes: satin chrome - polished chrome
€5.25
5,25 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.003.00
Specifications:
D - 12,7 mm diameter
P - Thickness 5 mm
B - Hole Ø 4,76 mm
€4.10
4,10 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.006.00
Specifications:
D - 16mm diameter
P - Thickness 5 mm
B - Hole Ø 5 mm
€4.92
4,92 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.004.00
Specifications:
D - 19 mm diameter
P - Thickness 7 mm
B - Hole Ø 6,35 mm
€5.33
5,33 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.005.00
Specifications:
D - 22 mm diameter
P - Thickness 7 mm
B - Hole Ø 8 mm
€5.90
5,90 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.002.00
Specifications:
D - 9,5 mm diameter
P - Thickness 3,2 mm
B - Hole Ø 4,76 mm
€23.77
23,77 € tax excl.
Tilting kit with cylinder hole Ø 25 mm wheelbase 67 mm for Garage.
Available colors:
Silver anodized (F1)
Anodized bronze (F4)
Polished Brass (GCTOL)
Satin Brass (GCTOS)
Polished Chrome (GCTCL)
Satin...
€23.77
23,77 € tax excl.
Handle kit for YALE 60 overhead door.
Available colors:
Silver anodized (F1)
Anodized bronze (F4)
Polished Brass (GCTOL)
Satin Brass (GCTOS)
Polished Chrome (GCTCL)
Satin Chrome (GCTCS)...
€39.93
39,93 € tax excl.
3-wing hinges for heavy and fire rated doors with screwed lid and closing spring. To obtain a greater load capacity it is possible to use more than one pair of hinges, just paying attention to their vertical spacing....
€53.28
53,28 € tax excl.
Hinges for heavy fire rated doors with 3 wings with screwed lid and closing spring
Max load: 2 hinges 150 Kg
€13.03
13,03 € tax excl.
IBFM Free-Occupied Deadbolt art. 37 for bathroom emergency opening, nickel-plated steel
Used in the lever closure of bathroom doors of rooms or trains
€3.34
3,34 € tax excl.
CORDLESS MULTI FOR ROTARY DRILLING ONLY - NO HAMMER/PERCUSSION drill bits are ideal for drilling the most common materials, including: brickwork, breeze block, wood, dry wall, slate, plastics, sheet metal. Unique...
€31.97
31,97 € tax excl.
DIAMOND - COOL WATER - NO PERCUSSION for fast, smooth cutting in all grades of hard and soft tiles.
Drilling with water increases the lifespan of the tool. Do not press strongly on the tool, let it work. Make a...
€5.39
5,39 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite. Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill bits....
€18.20
18,20 € tax excl.
CORDLESS MULTI is able of drilling wide selection of materials: brick, marble, metal, tile, slate, gypsum, limestone, hard plastic, wood, cast iron and hardened steel.Plastic box of 5 pieces with bits 4 - 5 - 6 - 8 -...
€25.33
25,33 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite.Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill...
€9.20
9,20 € tax excl.
BLUE GROOVE 4X Four times faster than the basic flat drill bits double Cutting Spurs scribe outside of the hole, reducing breakout.
Thicker Cutting Edge for longer drilling life. Bluegroove Point & Cutting Edge...
€10.88
10,88 € tax excl.
TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure.
Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...
€3.26
3,26 € tax excl.
TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...
€8.20
8,20 € tax excl.
Pedal doorstop with large rubber type art.244, 245, 246 suitable for locking doors and windows, max load 40 Kg
IBFM article 244-245-246
€2.70
2,70 € tax excl.
Recessed bolt to screw for railings, lever bolt for metal frames in galvanized steel
IBMF article 420
Front A
from 16mm - 20mm - 24mm
€21.65
21,65 € tax excl.
Door handle with rosette and escutcheon
Available finishes: Polished painted brass - Satin chromed brass - Scratched painted brass - Polished chromed brass
€5.74
5,74 € tax excl.
Small lock for mailboxes with 5 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes.
Opening...
€4.34
4,34 € tax excl.
PCL-3B GRAPHITE MINE
IDEAL FOR: Paper, Wood, Laminates, Building Material, Artificial Stones and Stones, Metals and Non-Ferrous Metals.
€5.33
5,33 € tax excl.
PCL-3C GRAPHITE AND PASTEL MINE
2 pcs Graphite - 2 pcs Yellow - 2 pcs Red
IDEAL FOR: Plastic Materials, Ceramic Materials, Glass, Paper, Wood, Laminates, Building Materials, Artificial Stones and Stones, Metals...
€19.67
19,67 € tax excl.
Pair of Hinge (the package contains 02 pcs.) with automatic simple action spring in steel, hinge used for door closers
IBFM article 102
Available sizes:
75mm
Door weight for max. 2 hinges 15 Kg
100mm...
€16.39
16,39 € tax excl.
Pedal doorstop heavy type with double spring, silver painted finish, max load 60 Kg
IBFM article 235
SUITABLE FOR HEAVY DOORS
€10.70
10,70 € tax excl.
Product specifically designed for exterior and interior vehicle glass surfaces (LCD, sunroof, headlights ..) to help stay clean longer. It removes dirt, bugs and contaminants effortlessly resulting in sparkling,...
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 16 mm diameter
L - Length 45mm
d - Hole Ø 13 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 12mm diameter
L - Length 25mm
d - Hole Ø 6 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 8mm diameter
L - Length 25mm
d - Hole Ø 6 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 12mm diameter
L - Length 25mm
d - Hole Ø 8 mm
€5.66
5,66 € tax excl.
IBFM roller stop for to and fro door in tropicalized steel article 208.
It can be used to stop any leaf.
Dimensions AxB:
16x100
25x120
€15.57
15,57 € tax excl.
ECO round kit for sliding door with Ghidini lock
Suitable for panel thickness 44mm, ±1mm
Available finishes: Polished chrome - Satin chrome - Polished brass
Measurements as per pictures.
€28.32
28,32 € tax excl.
SCROSS 1B round kit for sliding door with Ghidini lock
Suitable for panel thickness 44mm, ±1mm
Available finishes: Polished chrome - Satin chrome - Polished brass - Burnished brass - Matt black
Measurements as...
€3.84
3,84 € tax excl.
Ghidini round sliding door drag handle
Available finishes: Burnished brass - Polished chrome brass - Satin chrome brass - Polished painted brass
Measurements as per pictures.
€65.57
65,57 € tax excl.
The Set contains:
552-705 Ø 5mm (3/16 ")
552-706 Ø 6mm (1/4 ")
552-708 Ø 8mm (5/16 ")
552-712 Ø 12mm (1/2 ")
552-GUIDE
552-EX14 - HEXAGONAL ADAPTER FOR DRILL BIT
€36.07
36,07 € tax excl.
TURBOMAX HSS is mainly designed for high performance drilling of metal sheets; guarantees excellent results even on any type of wood and plastic. Suitable for drilling stainless steel.
Plastic box of 5 pieces with...
€286.89
286,89 € tax excl.
This set of 3 multifunctional cutters for making entrance and passage doors. Working in conjunction with the tongue and groove cutters, the set allows you to produce reinforced tenons up to 27mm in length with minimal...
€8.52
8,52 € tax excl.
Kit SCORRI 3 round blind for Ghidini sliding door
Available finishes: Polished chrome - Satin chrome - Polished brass - Burnished brass - Matt black
Measurements as per pictures.
€139.34
139,34 € tax excl.
The complete kit (item code 835-935.503.11), will enable you to produce 17 different rabbet sizes including rabbets for under-sized plywood applications.
For rabbet sizes over 12,7mm (1/2”), make the cuts in several...
€6.48
6,48 € tax excl.
Short socks with an innovative design. the coolmax® fabric combined with a special fabric process providing extra ventilation, allowing the feet to remain dry and cool even during the warmer seasons.
Stretch support...
€188.52
188,52 € tax excl.
This versatile disc cutter set allows you to create decorative effects or functional joints. By varying the combination of disc cutters you can produce channels, steps, tongues and grooves, wood biscuit joints and...
€4.92
4,92 € tax excl.
Small brass or bronzed Cremonese mechanism closure for window only central closure type Mignon 9 mm entry
Article 172 IBFM
€34.43
34,43 € tax excl.
Max load: 2 hinges 150 Kg
Heavy Duty 3D Adjustment Hinge with Ball Bearings Fits Many Profiles. This hinge is suitable for heavy duty doors, security doors, entrance doors, fire and smoke doors.
The installation...
€7.79
7,79 € tax excl.
IBFM door closer spring in nickel-plated steel of 200 mm for doors and leaves in general, simple assembly, max load 40 Kg
€49.10
49,10 € tax excl.
Article 489/E
Spring support wheel for swing gate
IBFM article 489/E
Capacity: 150 Kg
€0.82
0,82 € tax excl.
Douille ou douille encastrée pour planchers à rebord
laiton ou nickelé
Article 474 de l'IBFM
Available measures:
A mm
6
8
10
12
14
16
18
20
22
B mm
14
18
20
22
25
28
30
32
32
C mm...
€49.18
49,18 € tax excl.
The Crisp HY130DB work coverall is made of a durable polyester and cotton blend, which ensures resistance and durability over time. The fit is comfortable and allows freedom of movement during work. The coverall is...
€27.05
27,05 € tax excl.
SUMMER WORK SHORTS Art. EY132GI SLIM FIT
Material Cotton canvas 97% / Spandex 3%, 220 gr
Bermuda with triple stitching, front zip closure.
Double reinforcement fabric on the back.
Red ribbon/re ex on back tubular...
€64.75
64,75 € tax excl.
Low, light and comfortable U-Power safety shoes from the Red Lion line, with ultra-breathable nylon upper and soft suede, aluminum toe cap, anti-puncture, anti-slip and PU/PU Infinergy sole, S1P SRC ESD
-...
€18.96
18,96 € tax excl.
Fireball Ultimate Interior Cleaner works effortlessly on plastics, leather and vinyl surfaces. The special formula not only leaves surfaces clean and free from grime; but also protects in one step.
Packaging: 0,50 l...
€21.41
21,41 € tax excl.
Great finish and coating for tyres that repels dirt and water for a long-lasting shine. Being an SiO2 based tyre-protectant. Available in 2 options; blue (gloss) and red (satin). Both have the same durability and...
€2.87
2,87 € tax excl.
Universal key in zamak for control unit, panel, street cabinet and water/gas boxes.
Key for insert double bit 5 mm, square insert 6 - 8 mm and triangular insert 8,5 mm.
Measures looks image.
€10.57
10,57 € tax excl.
50mm padlock with adjustable long arch.
Complete with 2 keys.
Measurements as shown in the images.
€24.59
24,59 € tax excl.
Closing coordinator for double leaf doors in black painted iron.
Measurements as shown in the images.
€4.10
4,10 € tax excl.
Guide for latch for wasistas windows with bent strike, total arm size 19 cm (arm 18 only)
sliding slot 14 cm
base attacks 2.5x2.5 and 3.3x2.5 cm
IBMF article 347
FINISHES:
Tropicalized steel
Bronzed Steel
€5.33
5,33 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.007.00
Specifications:
D - 19 mm diameter
P - Thickness 6 mm
B - Hole Ø 6 mm
€22.55
22,55 € tax excl.
Hinges for heavy and fire doors with 2-wing bearing
to screw on doors
Max load: 2 hinges 80 Kg
€31.97
31,97 € tax excl.
Hinges for heavy and fire rated doors with 3-wing bearing
to screw on doors
Max load: 2 hinges 150 Kg
Showing 1-90 of 108 item(s)
Italiano
Français
Deutsch
Español