€12.30
12,30 € tax excl.
Adjustable click arm for wasistas window with outward opening
tropicalized steel finish
Filter By
Filter By
Home
Filter By
€4.84
4,84 € tax excl.
Small brass-plated adjustable cremone bolt mechanism from window only central locking lever
article 173 IBFM
€10.66
10,66 € tax excl.
Adjustable click arm for wasistas window with internal opening
tropicalized steel finish
€115.00
115,00 € tax excl.
Frame with groove handle for extraction from anodized aluminum dish drainer cabinet, with LED light bar
Made of anodized aluminum, it has an integrated LED bar inside the front profile to emit light where it is...
€4.10
4,10 € tax excl.
Spacer / spacer diameter 35 mm for grates adjustable from 30 to 40 mm, in galvanized iron, with hole of 14.5 mm
IBFM article 877
€0.90
0,90 € tax excl.
Adjustable spacer for assembling iron frames article 878, in galvanized steel + Threaded bushing article 878 / A
IBFM article 878 + 878 / A
€12.30
12,30 € tax excl.
Horizontal round small bolt in black painted aluminum with staple and with exposed fixing screws, and digital combination locking system. To be used in order to lock drawers, cabinets, openings or door leaves....
€65.49
65,49 € tax excl.
Amortized wheel with adjustable support for swing gates, easy overlapping type assembly.
IBFM article 489
Capacity: 170 Kg
€327.87
327,87 € tax excl.
Built-in corner sink with 2 basin and drainer.
Features:
Glossy black finish
Dimensions 830x830x500 mm
Weight 14 Kg
Supplied without mixer tap.
Measures looks image.
€2.13
2,13 € tax excl.
BIO “MATER-BI” bucket bag 30x50 cm for 8, 10 and 12 Lt buckets – sold in packs of 10 bags.
Biodegradable waste bag – compostable according to UNI EN 13432 standard.
€6.07
6,07 € tax excl.
Double action bolt or bolt in galvanized steel for metal frames for shutters and protected windows, single lever to close the two ways with M8 pitch
IBMF article 422
€1.48
1,48 € tax excl.
Suitable for closing floor lock rods, with protective lock article 475 IBFM
Measure = A
A - internal hole diameter
B - flange width
C - well outside diameter
A mm
6
8
10
12
14
16
18
20
22...
€114.75
114,75 € tax excl.
Complete kit for opening a window:
- Crank control
- Actuator
- Cable
- Sheath
- Fixing saddle and accessories
- Standard cable and sheath length m.3
For window drives on Wasistas always apply a safety arm.
€48.36
48,36 € tax excl.
LCD display, when the arm is extended the angle it makes with the base is indicated clearly on digital read-out to the nearest 0,05°. The measuring range is 0 - 360°. The vials allow variations from the vertical and...
€21.31
21,31 € tax excl.
Black painted zamak cremone handle with key, internal rod application for iron window.
Key lock for window or frame locking.
Available (R) Right - (L) Left.
Measures looks image.
€12.30
12,30 € tax excl.
Cremonese locking mechanism for windows with full 180 ° turn,
brass finish,
article 169 IBFM
€16.39
16,39 € tax excl.
Brass Cremonese for Ghidini Milena window frames
Available finishes: Polished painted brass - Satin chromed brass - Painted designer brass - Polished chromed brass
€10.66
10,66 € tax excl.
Satin brass window handle with bronze finish, gratz mechanism with holes and 7 mm spindle
€9.84
9,84 € tax excl.
Satin brass window handle with bronze finish, gratz mechanism with holes.
€29.51
29,51 € tax excl.
2 large gusseted front pockets, coin pocket, side pocket for tools, multi-functional side pocket with mobile phone holder and detacheable badge holder, 2 back pockets, one with zip, hammer loop.
Stretch insert at hip...
€94.26
94,26 € tax excl.
Two-tier plate and glass drainer complete with drip tray, elegant, sturdy, functional, simple and quick to install
- Maximum resistance to bending at full load
- Exceptional stability of the dishes
- Made of...
€117.21
117,21 € tax excl.
Drawer system plate rack depth 50 cm
Available in the following models:
60 cm
90 cm
120 cm
FEATURES
With Sistema cassetto comes the most brilliant and revolutionary way to organize the space of plates,...
€102.46
102,46 € tax excl.
Cutlery drawer system
Drawer system cutlery holder depth 50 cm
Available in the following width models:
45 cm: cutlery holder
60 cm: cutlery holder
90 cm: cutlery holder + knife holder
120 cm:...
€19.67
19,67 € tax excl.
Aluminum handle with compass for window and frames. Powder coating.
Available colors:
Silver anodized (F1)
Champagne anodized (F2)
Gold anodized (F3)
Anodized bronze (F4)
Polished Brass (GCTOL)...
€14.75
14,75 € tax excl.
Couple of hinges (the package contains 02 pcs) with automatic double action spring in steel, for Saloon type doors
Available sizes: 75 mm - 100 mm - 150 mm
Finishes available
Black painted steel
Nickel...
€16.44
16,44 € tax excl.
Milena 45x9 mm free/busy latch for bathroom WC doors 6x6 square
Available finishes: Polished painted brass - Satin chromed brass - Scratched painted brass - Polished chromed brass
Measurements as per pictures.
Ghidini Handle Garage doors cylinder hole Ø 25 mm, centre distance 67 mm moved, Kit CIL D25 INT67 SP
€24.51
24,51 € tax excl.
Tilting kit with cylinder hole Ø 25mm wheelbase 67mm offset for Garage.
Available colors:
Silver anodized (F1)
Anodized bronze (F4)
Polished Brass (GCTOL)
Satin Brass (GCTOS)
Polished Chrome (GCTCL)...
€22.95
22,95 € tax excl.
Door handle with plate
Available finishes: Polished painted brass - Satin chromed brass - Scratched bronze painted brass - Polished chromed brass
Available wheelbases: 7 cm - 8.5 cm (Yale hole) - 9 cm
€9.84
9,84 € tax excl.
Brass hammer for window and door frames with 7 mm square mechanism
Available finishes: Polished painted brass - Satin chromed brass - Painted designer brass - Polished chromed brass
€42.95
42,95 € tax excl.
Mignon bulky handle in zama with square rosette and patent square escutcheon for Q8 doors
Available finishes: satin chrome - polished chrome
€28.69
28,69 € tax excl.
Zama handle with square rosette and patent square escutcheon for Q8 doors
Available finishes: satin chrome - polished chrome
€16.71
16,71 € tax excl.
Optional containers for Front 15, can be used to increase the load capacity and maximize the use of space around the sink basins. Made of aluminum, they are solid and capacious, equipped with an anti-slip hooking...
€5.25
5,25 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.003.00
Specifications:
D - 12,7 mm diameter
P - Thickness 5 mm
B - Hole Ø 4,76 mm
€4.10
4,10 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.006.00
Specifications:
D - 16mm diameter
P - Thickness 5 mm
B - Hole Ø 5 mm
€4.92
4,92 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.004.00
Specifications:
D - 19 mm diameter
P - Thickness 7 mm
B - Hole Ø 6,35 mm
€5.33
5,33 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.005.00
Specifications:
D - 22 mm diameter
P - Thickness 7 mm
B - Hole Ø 8 mm
€5.90
5,90 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt
Article 791.002.00
Specifications:
D - 9,5 mm diameter
P - Thickness 3,2 mm
B - Hole Ø 4,76 mm
€23.77
23,77 € tax excl.
Tilting kit with cylinder hole Ø 25 mm wheelbase 67 mm for Garage.
Available colors:
Silver anodized (F1)
Anodized bronze (F4)
Polished Brass (GCTOL)
Satin Brass (GCTOS)
Polished Chrome (GCTCL)
Satin...
€23.77
23,77 € tax excl.
Handle kit for YALE 60 overhead door.
Available colors:
Silver anodized (F1)
Anodized bronze (F4)
Polished Brass (GCTOL)
Satin Brass (GCTOS)
Polished Chrome (GCTCL)
Satin Chrome (GCTCS)...
€39.93
39,93 € tax excl.
3-wing hinges for heavy and fire rated doors with screwed lid and closing spring. To obtain a greater load capacity it is possible to use more than one pair of hinges, just paying attention to their vertical spacing....
€53.28
53,28 € tax excl.
Hinges for heavy fire rated doors with 3 wings with screwed lid and closing spring
Max load: 2 hinges 150 Kg
€13.03
13,03 € tax excl.
IBFM Free-Occupied Deadbolt art. 37 for bathroom emergency opening, nickel-plated steel
Used in the lever closure of bathroom doors of rooms or trains
€3.34
3,34 € tax excl.
CORDLESS MULTI FOR ROTARY DRILLING ONLY - NO HAMMER/PERCUSSION drill bits are ideal for drilling the most common materials, including: brickwork, breeze block, wood, dry wall, slate, plastics, sheet metal. Unique...
€31.97
31,97 € tax excl.
DIAMOND - COOL WATER - NO PERCUSSION for fast, smooth cutting in all grades of hard and soft tiles.
Drilling with water increases the lifespan of the tool. Do not press strongly on the tool, let it work. Make a...
€5.39
5,39 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite. Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill bits....
€18.20
18,20 € tax excl.
CORDLESS MULTI is able of drilling wide selection of materials: brick, marble, metal, tile, slate, gypsum, limestone, hard plastic, wood, cast iron and hardened steel.Plastic box of 5 pieces with bits 4 - 5 - 6 - 8 -...
€25.33
25,33 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite.Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill...
€9.20
9,20 € tax excl.
BLUE GROOVE 4X Four times faster than the basic flat drill bits double Cutting Spurs scribe outside of the hole, reducing breakout.
Thicker Cutting Edge for longer drilling life. Bluegroove Point & Cutting Edge...
€10.88
10,88 € tax excl.
TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure.
Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...
€3.26
3,26 € tax excl.
TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...
€8.20
8,20 € tax excl.
Pedal doorstop with large rubber type art.244, 245, 246 suitable for locking doors and windows, max load 40 Kg
IBFM article 244-245-246
€2.70
2,70 € tax excl.
Recessed bolt to screw for railings, lever bolt for metal frames in galvanized steel
IBMF article 420
Front A
from 16mm - 20mm - 24mm
€21.65
21,65 € tax excl.
Door handle with rosette and escutcheon
Available finishes: Polished painted brass - Satin chromed brass - Scratched painted brass - Polished chromed brass
€5.74
5,74 € tax excl.
Small lock for mailboxes with 5 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes.
Opening...
€5.74
5,74 € tax excl.
Small lock for mailboxes with 12 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes.
Opening...
€4.34
4,34 € tax excl.
PCL-3B GRAPHITE MINE
IDEAL FOR: Paper, Wood, Laminates, Building Material, Artificial Stones and Stones, Metals and Non-Ferrous Metals.
€5.33
5,33 € tax excl.
PCL-3C GRAPHITE AND PASTEL MINE
2 pcs Graphite - 2 pcs Yellow - 2 pcs Red
IDEAL FOR: Plastic Materials, Ceramic Materials, Glass, Paper, Wood, Laminates, Building Materials, Artificial Stones and Stones, Metals...
€19.67
19,67 € tax excl.
Pair of Hinge (the package contains 02 pcs.) with automatic simple action spring in steel, hinge used for door closers
IBFM article 102
Available sizes:
75mm
Door weight for max. 2 hinges 15 Kg
100mm...
€16.39
16,39 € tax excl.
Pedal doorstop heavy type with double spring, silver painted finish, max load 60 Kg
IBFM article 235
SUITABLE FOR HEAVY DOORS
€13.03
13,03 € tax excl.
Plastic accessory Cutlery holder and saucer holder to be inserted on ARCO, MODULAR and INOXMATIC dish drainers by Tecnoinox
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 16 mm diameter
L - Length 45mm
d - Hole Ø 13 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 12mm diameter
L - Length 25mm
d - Hole Ø 6 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 8mm diameter
L - Length 25mm
d - Hole Ø 6 mm
€6.15
6,15 € tax excl.
Adapter bushing ring on cutter shank or tip
Specifications:
D - 12mm diameter
L - Length 25mm
d - Hole Ø 8 mm
€204.92
204,92 € tax excl.
Removable dish drainer for base, its structure is entirely made of AISI 304 stainless steel, as is the Inoxmatic model dish drainer mounted on it which ensures great stability of the dishes and great load capacity....
€19.59
19,59 € tax excl.
Features:
18 Liter replacement bucket with handle for Tecnoinox Prima waste bins, without lid:
Height 30 cm
Length 27.5 cm
Width 24 cm
€19.10
19,10 € tax excl.
Replacement bucket for Tecnoinox T2 waste bins, without lid:
Small: 198 mm x 264 mm Height 24.5/26 cm
Medium: 263 mm x 267 mm Height 24.5/26 cm
€16.39
16,39 € tax excl.
Replacement plastic bucket with handle for waste bins, without lid.
Height 30 cm
Length 35.5 cm
Width 18.3 cm
€5.66
5,66 € tax excl.
IBFM roller stop for to and fro door in tropicalized steel article 208.
It can be used to stop any leaf.
Dimensions AxB:
16x100
25x120
€15.57
15,57 € tax excl.
ECO round kit for sliding door with Ghidini lock
Suitable for panel thickness 44mm, ±1mm
Available finishes: Polished chrome - Satin chrome - Polished brass
Measurements as per pictures.
€28.32
28,32 € tax excl.
SCROSS 1B round kit for sliding door with Ghidini lock
Suitable for panel thickness 44mm, ±1mm
Available finishes: Polished chrome - Satin chrome - Polished brass - Burnished brass - Matt black
Measurements as...
€3.84
3,84 € tax excl.
Ghidini round sliding door drag handle
Available finishes: Burnished brass - Polished chrome brass - Satin chrome brass - Polished painted brass
Measurements as per pictures.
€65.57
65,57 € tax excl.
The Set contains:
552-705 Ø 5mm (3/16 ")
552-706 Ø 6mm (1/4 ")
552-708 Ø 8mm (5/16 ")
552-712 Ø 12mm (1/2 ")
552-GUIDE
552-EX14 - HEXAGONAL ADAPTER FOR DRILL BIT
€36.07
36,07 € tax excl.
TURBOMAX HSS is mainly designed for high performance drilling of metal sheets; guarantees excellent results even on any type of wood and plastic. Suitable for drilling stainless steel.
Plastic box of 5 pieces with...
€286.89
286,89 € tax excl.
This set of 3 multifunctional cutters for making entrance and passage doors. Working in conjunction with the tongue and groove cutters, the set allows you to produce reinforced tenons up to 27mm in length with minimal...
€8.52
8,52 € tax excl.
Kit SCORRI 3 round blind for Ghidini sliding door
Available finishes: Polished chrome - Satin chrome - Polished brass - Burnished brass - Matt black
Measurements as per pictures.
€139.34
139,34 € tax excl.
The complete kit (item code 835-935.503.11), will enable you to produce 17 different rabbet sizes including rabbets for under-sized plywood applications.
For rabbet sizes over 12,7mm (1/2”), make the cuts in several...
€6.48
6,48 € tax excl.
Short socks with an innovative design. the coolmax® fabric combined with a special fabric process providing extra ventilation, allowing the feet to remain dry and cool even during the warmer seasons.
Stretch support...
€56.56
56,56 € tax excl.
Stainless steel draining board with supports in clear plastic that can be easily adjusted and snapped onto the grid.
This model is particularly useful with low hanging units (min 32 cm) where a single grid can be...
€188.52
188,52 € tax excl.
This versatile disc cutter set allows you to create decorative effects or functional joints. By varying the combination of disc cutters you can produce channels, steps, tongues and grooves, wood biscuit joints and...
€4.92
4,92 € tax excl.
Small brass or bronzed Cremonese mechanism closure for window only central closure type Mignon 9 mm entry
Article 172 IBFM
€34.43
34,43 € tax excl.
Max load: 2 hinges 150 Kg
Heavy Duty 3D Adjustment Hinge with Ball Bearings Fits Many Profiles. This hinge is suitable for heavy duty doors, security doors, entrance doors, fire and smoke doors.
The installation...
€7.79
7,79 € tax excl.
IBFM door closer spring in nickel-plated steel of 200 mm for doors and leaves in general, simple assembly, max load 40 Kg
€49.10
49,10 € tax excl.
Article 489/E
Spring support wheel for swing gate
IBFM article 489/E
Capacity: 150 Kg
€81.97
81,97 € tax excl.
Arco can rest on worktops or shelves, designed in an attactive and ergonomic shape, it features steel and clear policarbonate sides. Arco is entirely made in AISI 304 stainless steel.
Arco is available in size...
€229.51
229,51 € tax excl.
Kitchen dish drainer with two shelves for corner cabinet - Tecnoinox Inoxmatic.
It comes complete with frame and the rear upright needed for the assembly of the cabinet.
Inoxmatic for corner cabinet is available...
€13.03
13,03 € tax excl.
Tecnoinox cover with filter - square handle, gray 7012
Size:
Small 235 x 185 mm
€0.82
0,82 € tax excl.
Douille ou douille encastrée pour planchers à rebord
laiton ou nickelé
Article 474 de l'IBFM
Available measures:
A mm
6
8
10
12
14
16
18
20
22
B mm
14
18
20
22
25
28
30
32
32
C mm...
€49.18
49,18 € tax excl.
The Crisp HY130DB work coverall is made of a durable polyester and cotton blend, which ensures resistance and durability over time. The fit is comfortable and allows freedom of movement during work. The coverall is...
€27.05
27,05 € tax excl.
SUMMER WORK SHORTS Art. EY132GI SLIM FIT
Material Cotton canvas 97% / Spandex 3%, 220 gr
Bermuda with triple stitching, front zip closure.
Double reinforcement fabric on the back.
Red ribbon/re ex on back tubular...
Showing 1-90 of 133 item(s)
Italiano
Français
Deutsch
Español