Click for more products.
No produts were found.
0
Home
Filter By
Filter By
Color or Finish
Cut
Diameter
Measure
Length
Weight

  • 0.03 kg - 40 kg

Brand
Brand

Home

Filter By
Brand: CMT Orange Tools Brand: Hettich Brand: IBFM Brand: Irwin Tools Brand: Milwaukee Brand: Samet Clear all
M12 FUEL 76mm sub compact multi-material cut-off tool M12FCOT-0 M12 FUEL 76mm sub compact multi-material cut-off tool M12FCOT-0

1000W angle grinder, 115 mm Milwaukee AG 10-115 EK

€81.89
81,89 € tax excl.
Powerful 1000W motor for high performance. Compact design: only 276 mm in length and 2.1 kg in weight for better handling. Accidental Restart Protection (LLO). Soft start. Resistant protective cover adjustable...
Hammer drill 18V, Compact Brushless Milwaukee M18CBLPD-402C Hammer drill 18V, Compact Brushless Milwaukee M18CBLPD-402C

18V 5.0 Ah Milwaukee REDLITHIUM-ION M18B5 battery

€135.25
135,25 € tax excl.
Up to 2.5 times more battery life, up to 20% more power and 2 times longer life than other lithium-ion batteries and / or previous Milwaukee technology. The results depend on the voltage, the tool and the application.
M12 FUEL 76mm sub compact multi-material cut-off tool M12FCOT-0 M12 FUEL 76mm sub compact multi-material cut-off tool M12FCOT-0

800W 115mm angle grinder Milwaukee AG 800-115 E

€65.08
65,08 € tax excl.
Grinder with powerful 800 W motor and extremely light (only 2 kg in weight). Compact design and slim machine body for easier handling (only 194 mm long). Accidental Restart Protection (LLO). Soft start. Steel...
Aluminum combination deadbolts IBFM 56 Aluminum combination deadbolts IBFM 56

Aluminum combination deadbolts IBFM 56

€12.30
12,30 € tax excl.
Horizontal round small bolt in black painted aluminum with staple and with exposed fixing screws, and digital combination locking system. To be used in order to lock drawers, cabinets, openings or door leaves....
Angle grinder 1000W, 125 mm Milwaukee AG 10-125 EK Angle grinder 1000W, 125 mm Milwaukee AG 10-125 EK

Angle grinder 1000W, 125 mm Milwaukee AG 10-125 EK

€95.00
95,00 € tax excl.
Powerful 1000W motor for high performance. Compact design: only 276 mm in length and 2.1 kg in weight for better handling. Accidental Restart Protection (LLO). Soft start. Resistant protective cover adjustable...
IBFM 475 spring staples against dust for locks IBFM 475 spring staples against dust for locks

Built-in floor well with dust cap and spring

€1.48
1,48 € tax excl.
Suitable for closing floor lock rods, with protective lock article 475 IBFM Measure = A A - internal hole diameter B - flange width C - well outside diameter A mm 6 8 10 12 14 16 18 20 22...
CMT Tools DAF-001 Digital angle finger CMT Tools DAF-001 Digital angle finger

CMT Tools DAF-001 Digital angle finger

€48.36
48,36 € tax excl.
LCD display, when the arm is extended the angle it makes with the base is indicated clearly on digital read-out to the nearest 0,05°. The measuring range is 0 - 360°. The vials allow variations from the vertical and...
Cremone handle with key for window IBFM 565/ZA Cremone handle with key for window IBFM 565/ZA

Cremone handle with key for window IBFM 565/ZA

€21.31
21,31 € tax excl.
Black painted zamak cremone handle with key, internal rod application for iron window. Key lock for window or frame locking. Available (R) Right - (L) Left. Measures looks image.
Dipped gloves for heavy application Milwaukee CUT LEVEL 5/E Dipped gloves for heavy application Milwaukee CUT LEVEL 5/E

Dipped gloves for heavy application Milwaukee CUT LEVEL 5/E

€11.56
11,56 € tax excl.
Features: Double layer of nitrile for added durability and increased protection from sharp objects Excellent grip performance, nitrile material performs better than other materials in wide range of temperatures...
Dipped gloves for light application Milwaukee CUT LEVEL 1/A Dipped gloves for light application Milwaukee CUT LEVEL 1/A

Dipped gloves for light application Milwaukee CUT LEVEL 1/A

€4.34
4,34 € tax excl.
Features: Designed to provide ultimate durability and all–day comfort, ideal for material handling or light construction duty Reinforced palm due to a nitrile texture Designed to provide dexterity when handling...
Dipped gloves Hi-Vis Milwaukee CUT LEVEL 3/C Dipped gloves Hi-Vis Milwaukee CUT LEVEL 3/C

Dipped gloves Hi-Vis Milwaukee CUT LEVEL 3/C

€9.84
9,84 € tax excl.
Features: Fluorescent material provides high visibility Offers more resistance than a Cut Level 1, to cut and abrasion, ideal protection for stripping wire or pipe threading and cutting Reinforced nitrile coating...
IBMF double acting spring hinges "Bommer" type IBMF double acting spring hinges "Bommer" type

Double action Bommer type spring hinge

€14.75
14,75 € tax excl.
Couple of hinges (the package contains 02 pcs) with automatic double action spring in steel, for Saloon type doors Available sizes: 75 mm - 100 mm - 150 mm Finishes available Black painted steel Nickel...
Door-on-door slider fitting for refrigerator Door-on-door slider fitting for refrigerator

Flap hinge nickel plated MARKANT 11

€8.20
8,20 € tax excl.
Flap hinge MARKANT 11. Three screw fasteners ensure firm and exact hinge seating in bottom panel and flap. Measures looks image.
Gloves High resistence Milwaukee IMPACT DEMOLITION GLOVES Gloves High resistence Milwaukee IMPACT DEMOLITION GLOVES

Gloves High resistence Milwaukee IMPACT DEMOLITION GLOVES

€36.89
36,89 € tax excl.
Features: Impact resistant material, on back of hand and fingers, to reduce and absorb shock ARMORTEX reinforced palms and finger tips: Increased durability and hand protection Superior palm grip on oily and wet...
Guide bearing for 12,7x5x4,76 mm CMT cutter Guide bearing for 12,7x5x4,76 mm CMT cutter

Guide bearing for 12,7x5x4,76 mm CMT cutter

€5.25
5,25 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.003.00 Specifications: D - 12,7 mm diameter P - Thickness 5 mm B - Hole Ø 4,76 mm
Guide bearing for 16x5x5mm CMT cutter Guide bearing for 16x5x5mm CMT cutter

Guide bearing for 16x5x5mm CMT cutter

€4.10
4,10 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.006.00 Specifications: D - 16mm diameter P - Thickness 5 mm B - Hole Ø 5 mm
Guide bearing for 19x7x6,35 mm CMT cutter Guide bearing for 19x7x6,35 mm CMT cutter

Guide bearing for 19x7x6,35 mm CMT cutter

€4.92
4,92 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.004.00 Specifications: D - 19 mm diameter P - Thickness 7 mm B - Hole Ø 6,35 mm
Guide bearing for 22x7x8 mm CMT cutter Guide bearing for 22x7x8 mm CMT cutter

Guide bearing for 22x7x8 mm CMT cutter

€5.33
5,33 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.005.00 Specifications: D - 22 mm diameter P - Thickness 7 mm B - Hole Ø 8 mm
Guide bearing for 9,5x3,2x4,76 mm CMT cutter Guide bearing for 9,5x3,2x4,76 mm CMT cutter

Guide bearing for 9,5x3,2x4,76 mm CMT cutter

€5.90
5,90 € tax excl.
Radial ball bearing with seals, replacement for cutter Cmt Article 791.002.00 Specifications: D - 9,5 mm diameter P - Thickness 3,2 mm B - Hole Ø 4,76 mm
Hybrid leather gloves Milwaukee HYBRID LEATHER GLOVES Hybrid leather gloves Milwaukee HYBRID LEATHER GLOVES

Hybrid leather gloves Milwaukee HYBRID LEATHER GLOVES

€34.02
34,02 € tax excl.
Features: SMARTSWIPE - Allows the use of touch screen devices without removing the gloves on the index finger knuckle Leather on the palm for extended durability and reinforced protection of hands Synthetic...
M12 FUEL 76mm sub compact multi-material cut-off tool M12FCOT-0 M12 FUEL 76mm sub compact multi-material cut-off tool M12FCOT-0

Indelible large felt tip pen Milwaukee blue

€2.20
2,20 € tax excl.
Blue 6.2mm wide tip permanent marker. Dries in seconds. Up to 72 hours without cap - does not dry out. Can be used on wet, oily, rusty and debris surfaces. For use on concrete, wood, metal, plywood, OSB and plastic.
M12 FUEL 76mm sub compact multi-material cut-off tool M12FCOT-0 M12 FUEL 76mm sub compact multi-material cut-off tool M12FCOT-0

Indelible marker extra wide tip black Milwaukee

€3.10
3,10 € tax excl.
Permanent marker extra wide tip 14.5 mm black. Dries in seconds. Up to 72 hours without cap - does not dry out. Can be used on wet, oily, rusty and debris surfaces. For use on concrete, wood, metal, plywood, OSB...
M12 FUEL 76mm sub compact multi-material cut-off tool M12FCOT-0 M12 FUEL 76mm sub compact multi-material cut-off tool M12FCOT-0

Indelible marker extra wide tip blue Milwaukee

€3.10
3,10 € tax excl.
Indelible marker extra wide tip 14.5 mm blue. Dries in seconds. Up to 72 hours without cap - does not dry out. Can be used on wet, oily, rusty and debris surfaces. For use on concrete, wood, metal, plywood, OSB...
M12 FUEL 76mm sub compact multi-material cut-off tool M12FCOT-0 M12 FUEL 76mm sub compact multi-material cut-off tool M12FCOT-0

Indelible marker large tip black Milwaukee

€2.70
2,70 € tax excl.
Black 6.2mm wide tip permanent marker. Dries in seconds. Up to 72 hours without cap - does not dry out. Can be used on wet, oily, rusty and debris surfaces. For use on concrete, wood, metal, plywood, OSB and plastic.
M12 FUEL 76mm sub compact multi-material cut-off tool M12FCOT-0 M12 FUEL 76mm sub compact multi-material cut-off tool M12FCOT-0

Indelible marker wide tip red Milwaukee

€2.70
2,70 € tax excl.
Permanent marker 6.2 mm wide red tip. Dries in seconds. Up to 72 hours without cap - does not dry out. Can be used on wet, oily, rusty and debris surfaces. For use on concrete, wood, metal, plywood, OSB and plastic.
Irwin TCT cylindrical drill bits metal drilling Irwin TCT cylindrical drill bits metal drilling

Irwin TCT cylindrical drill bits metal drilling

€10.88
10,88 € tax excl.
TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure. Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...
Irwin TURBOMAX HSS multifunction drill bits metal drilling Irwin TURBOMAX HSS multifunction drill bits metal drilling

Irwin TURBOMAX HSS multifunction drill bits metal drilling

€3.26
3,26 € tax excl.
TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...
Leather gloves Milwaukee LEATHER GLOVES Leather gloves Milwaukee LEATHER GLOVES

Leather gloves Milwaukee LEATHER GLOVES

€24.59
24,59 € tax excl.
Features: Top grain goatskin leather gives extended durability and reinforced protection of hands Reinforced palm provides added comfort and protection while handling heavy objects Keystone thumb for comfortable...
M18 Led area light 18V Milwaukee M18AL-0 M18 Led area light 18V Milwaukee M18AL-0

M18 Led area light 18V Milwaukee M18AL-0

€109.00
109,00 € tax excl.
TRUEVIEW™ high definition lighting Eight high performance LEDs provide 1500 Lumens of light output - up to 30% brighter than 250 W halogen lights Supplied WITHOUT batteries, charger and kitbox or bag.
Sub compact ½″ impact wrench 12V, M12 FUEL Milwaukee M12FIWF12-422X Sub compact ½″ impact wrench 12V, M12 FUEL Milwaukee M12FIWF12-422X

M18 Led area light 18V Milwaukee M18AL-0

€159.00
159,00 € tax excl.
TRUEVIEW™ high definition lighting Eight high performance LEDs provide 1500 Lumens of light output - up to 30% brighter than 250 W halogen lights Supplied WITHOUT batteries, charger and kitbox or bag.
Metal lock for mailboxes IBFM filing cabinet 142 Metal lock for mailboxes IBFM filing cabinet 142

Metal lock for mailboxes IBFM filing cabinet 142

€5.74
5,74 € tax excl.
Small lock for mailboxes with 5 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes. Opening...
Metal lock for mailboxes IBFM filing cabinet 143 Metal lock for mailboxes IBFM filing cabinet 143

Metal lock for mailboxes IBFM filing cabinet 143

€5.74
5,74 € tax excl.
Small lock for mailboxes with 12 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes. Opening...
Mina graphite 6 pcs for PCL-3 CMT Tools Mina graphite 6 pcs for PCL-3 CMT Tools

Mina graphite 6 pcs for PCL-3 CMT Tools

€4.34
4,34 € tax excl.
PCL-3B GRAPHITE MINE IDEAL FOR: Paper, Wood, Laminates, Building Material, Artificial Stones and Stones, Metals and Non-Ferrous Metals.
Mina graphite and pastel 6 pcs for PCL-3 CMT Tools Mina graphite and pastel 6 pcs for PCL-3 CMT Tools

Mina graphite and pastel 6 pcs for PCL-3 CMT Tools

€5.33
5,33 € tax excl.
PCL-3C GRAPHITE AND PASTEL MINE 2 pcs Graphite - 2 pcs Yellow - 2 pcs Red   IDEAL FOR: Plastic Materials, Ceramic Materials, Glass, Paper, Wood, Laminates, Building Materials, Artificial Stones and Stones, Metals...
Modular System Milwaukee PACKOUT Organiser XL 4932478625 Modular System Milwaukee PACKOUT Organiser XL 4932478625

Modular System Milwaukee PACKOUT Organiser XL 4932478625

€77.87
77,87 € tax excl.
Features: Part of the PACKOUT modular storage system 50% higher than the standard PACKOUT organiser - ideal to store tools, batteries, chargers, larger fittings and other equipment Quick Adjust Dividers allow...
IBMF 102 single actin spring hinge "Bommer" type IBMF 102 single actin spring hinge "Bommer" type

Pair of single action Bommer type spring hinges

€19.67
19,67 € tax excl.
Pair of Hinge (the package contains 02 pcs.) with automatic simple action spring in steel, hinge used for door closers IBFM article 102 Available sizes: 75mm Door weight for max. 2 hinges 15 Kg 100mm...
Kit 12V Percussion drill + Compact riveter Milwaukee M12FPP2S-422X Kit 12V Percussion drill + Compact riveter Milwaukee M12FPP2S-422X

Percussion drill kit 18V + Grinder Milwaukee M18FPP2F-504X

€759.00
759,00 € tax excl.
The kit includes: M18 FPD2 - 18V drill, brushless motor, FUEL technology, 2 speeds, 135 Nm, 32,000 p / minM18 CAG 115X - 18V grinder, brushless motor, FUEL technology, 115 mm disc, prof. max cut 28 mm, quick disc change
Power scraper SDS-PLUS 720W 3,6 J Milwaukee PCE 3 Power scraper SDS-PLUS 720W 3,6 J Milwaukee PCE 3

Power scraper SDS-PLUS 720W 3,6 J Milwaukee PCE 3

€359.00
359,00 € tax excl.
Impact mass capable of developing 3.6 J 720 W of power Variable speed switch for maximum control Full metal gearbox for maximum strength Additional adjustable handle according to the applications to be performed...
Professional tool box Milwaukee PACKOUT CONTAINER Professional tool box Milwaukee PACKOUT CONTAINER

Professional tool box Milwaukee PACKOUT CONTAINER

€63.11
63,11 € tax excl.
Features: Versatile stacking options: vertical and horizontal 22 kg weight capacity Large storage capacity for all kind of tools Other PACKOUT products can be stacked on top of the crate Part of the PACKOUT...
Screwdriver set 6-piece Milwaukee SET 1 Screwdriver set 6-piece Milwaukee SET 1
-30%

Screwdriver set 6-piece Milwaukee SET 1

€14.86 €21.23
14,86 € tax excl.
Features: Permanent visible ID markings allows for quick tool identification Landyard hole for easy attachment to a safety system Hardened magnetic tips for maximum durability and fastener retention Anti role, 3...
Set 5 cylindrical drill bits for metal TURBO MAX Irwin Set 5 cylindrical drill bits for metal TURBO MAX Irwin

Set 5 cylindrical drill bits for metal TURBO MAX Irwin

€36.07
36,07 € tax excl.
TURBOMAX HSS is mainly designed for high performance drilling of metal sheets; guarantees excellent results even on any type of wood and plastic. Suitable for drilling stainless steel. Plastic box of 5 pieces with...
Set rabbet with 15 bearings 935.503.11 shank 12 mm CMT Set rabbet with 15 bearings 935.503.11 shank 12 mm CMT

Set rabbet with 15 bearings 935.503.11 shank 12 mm CMT

€139.34
139,34 € tax excl.
The complete kit (item code 835-935.503.11), will enable you to produce 17 different rabbet sizes including rabbets for under-sized plywood applications. For rabbet sizes over 12,7mm (1/2”), make the cuts in several...
Slot cutter set 923.001.11 8 mm shank CMT Slot cutter set 923.001.11 8 mm shank CMT

Slot cutter set 923.001.11 8 mm shank CMT

€188.52
188,52 € tax excl.
This versatile disc cutter set allows you to create decorative effects or functional joints. By varying the combination of disc cutters you can produce channels, steps, tongues and grooves, wood biscuit joints and...
Kit 12V Percussion drill + Compact riveter Milwaukee M12FPP2S-422X Kit 12V Percussion drill + Compact riveter Milwaukee M12FPP2S-422X

Storage plate for PACKOUT Milwaukee

€36.07
36,07 € tax excl.
System for attaching Heavy Duty cases to the PACKOUT system. Multiple configurations. Maximum capacity 45 kg on the floor. Maximum capacity 22 kg on the wall.
IBFM 474 Floor staples IBFM 474 Floor staples

Thermowell or bushing for flanged floor

€0.82
0,82 € tax excl.
Douille ou douille encastrée pour planchers à rebord laiton ou nickelé Article 474 de l'IBFM Available measures: A mm 6 8 10 12 14 16 18 20 22 B mm 14 18 20 22 25 28 30 32 32 C mm...
IBFM Window opening stop wasistas IBFM Window opening stop wasistas

Guide arm with stop for bottom hinged windows 347

€4.10
4,10 € tax excl.
Guide for latch for wasistas windows with bent strike, total arm size 19 cm (arm 18 only) sliding slot 14 cm base attacks 2.5x2.5 and 3.3x2.5 cm IBMF article 347 FINISHES: Tropicalized steel Bronzed Steel
Load More Products
Showing 1-90 of 116 item(s)

Settings

Click for more products.
No produts were found.

Menu

Please sign in first.

Sign in

Create a free account to use wishlists.

Sign in