€7.54
7,54 € tax excl.
92 mm short 11R 15 adjustable hingefor wooden doors and windowsAdjustable 0/+3 mm in height, +/- 3 mm laterally and in depth
Filter By
Filter By
Home
Filter By
€12.30
12,30 € tax excl.
Adjustable hinge 11R of 20 Long 112 mm for wooden doorsAdjustable 0/+3 mm in height, +/- 3 mm laterally and in depth
€11.64
11,64 € tax excl.
180 ° screw-on hinge in galvanized steel, pin and washer in nickel-plated brass 1055-U4 EMKA
Length 53 mm, Height 40.2 mm, Distance between mounting holes 38 mm
€0.82
0,82 € tax excl.
Standard hinge 9 in steel for furniture SFS intec
€1.90
1,90 € tax excl.
20R adjustable steel hinge 14 SFS intecfor wooden doors and windowsadjustable up to 3 mm in height
€14.75
14,75 € tax excl.
2D screw-on hinge zinc die black powder coated; pin stainless steel.
Door position: Hinges for flush doors
Installation circumstances: Prominent hinge
Hinge adjustable: Hinge adjustable 2D - 2D nut useable...
€16.01
16,01 € tax excl.
Adjustable 11R 20 hinge with anti-theft device for wooden doors
Adjustable 0 / + 3 mm in height, +/- 3 mm laterally and in depth
The stems of the male are both rotating and self-tapping
€7.86
7,86 € tax excl.
Releasable nickel-plated steel hinge to be used as rostrum for door alignment.
Cup diameter of Ø 16.2 mm for door and the frame.
€10.66
10,66 € tax excl.
Water-based finish with wax effect Amonn aquatop Colorless 00 for external and internal applications
For finishing work on wood inside and outside with dimensional stability and partial dimensional stability not in...
€19.67
19,67 € tax excl.
Amonn Lignex aquagel transparent wax waxed finish White 51, for indoor and outdoor use
For impregnation work on wood inside and outside, not with dimensional stability and not in direct contact with the ground or...
€15.23
15,23 € tax excl.
LIGNEX GARTEN OEL - Garden furniture and outdoor wooden floors need special protection. The oil, penetrating deeply, protects the wood from the inside, preventing cracks or splits from forming and slowing down the...
€0.99
0,99 € tax excl.
14 steel anuba hinge for doors and frames SFS intec
Used for moving doors and windows made of wood or composite materials.
€2.12
2,12 € tax excl.
Anuba hinge 14 in steel with 3 legs, sliding pin for SFS intec doors and fixtures, center distance 13.7 mm
€4.39
4,39 € tax excl.
Anuba hinge 16 in steel with 3 legs, sliding pin for SFS intec doors and fixtures, center distance 15.5 mm
€0.87
0,87 € tax excl.
Standard hinge 11 in steel for furniture SFS intec
€16.39
16,39 € tax excl.
Balloon profile-gasket for shower box, glass thickness 6-8 mm, length 2500 mm.
To be inserted vertically on the glass. It is mounted on the side of the shower door and thanks to its balloon shapeprevents the exit of...
€16.39
16,39 € tax excl.
Balloon profile-gasket for shower box, glass thickness 8-10 mm, length 2500 mm 8PT1-10
To be inserted vertically on the glass. It is mounted on the side of the shower door and thanks to its balloon shapeprevents the...
€8.11
8,11 € tax excl.
Black polyamide lock with lever-tab, 1/4 turn locking, nut fixing with flat gasket and self-tapping screw.
18 mm box lock complete with 3 levers (codes: 1000-5164, 1000-U26, 1000-26).
€6.94
6,94 € tax excl.
Central hinge for door
Article 706618 nickel matt steel
Article 1272193 brassed steel
€47.13
47,13 € tax excl.
COMPLETE CRANKSET FOR ONE DOOR.
Pivot and hinge for doors in wood wire
Article 1272070 matt chrome
Article 516 543 gold
€21.21
21,21 € tax excl.
For finishing work on wood inside and outside with dimensional stability and partial dimensional stability not in direct contact with the ground or with water. It is particularly suitable for outside doors and...
€12.30
12,30 € tax excl.
Connecting Hinge for free fold for Senso and E-Senso. Installation with chipboard screws.
€27.12
27,12 € tax excl.
Diverting profile-gasket 180° for shower box, glass thickness 6-8 mm, length 2200 mm 8PT8-30
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€30.82
30,82 € tax excl.
Diverting profile-gasket 180° for shower box, glass thickness 8-10 mm, length 2500 mm 8PT1-30
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€27.05
27,05 € tax excl.
Diverting profile-gasket anticrushing for shower box, glass thickness 8-10 mm, length 2500 mm 8PT1-33
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€20.49
20,49 € tax excl.
Diverting profile-gasket for shower box, glass thickness 10 mm, length 2500 mm 8PT1-20
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€20.29
20,29 € tax excl.
Diverting profile-gasket for shower box, glass thickness 6-8 mm, length 2200 mm 8PT8-20
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€31.97
31,97 € tax excl.
Diverting profile-gasket for shower box, glass thickness 8-10 mm, length 2500 mm 8PT8-25
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€27.12
27,12 € tax excl.
Double diverting profile-gasket for shower box, glass thickness 6-8 mm, length 2500 mm 8PT8-35
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€27.79
27,79 € tax excl.
Double diverting profile-gasket for shower box, glass thickness 8-10 mm, length 2500 mm 8PT1-35
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€3.69
3,69 € tax excl.
Double-bit insert key 3, powder-coated black zamak Emka 1004-05
€7.38
7,38 € tax excl.
Black EPDM gasket (EPDM 65 ° ± 5 Shore A)
material: foam rubber EPDM; clamping profile EPDM 65° ± 5 Shore A Surface and colour: black Seal balloon / seal body: Yes Position sealing element: top Product type:...
€7.38
7,38 € tax excl.
material: EPDM foam; tightening profile EPDM 65 ° ± 5 Shore ASurface and color: blackSeal flask / seal body: YesPosition the sealing element: lateralType of product: sealType of gasket: self-locking clip profileThe...
€17.21
17,21 € tax excl.
Snap lock in galvanized steel, tongue and square in rough zamak, spring in galvanized steel.Door version: right, leftType of blocking system: block-blockmaterial: steelSurface and color: galvanizedInstallation...
€8.11
8,11 € tax excl.
Profile hinge zinc plated with weld-on stud raw cover stainless steel.
Door position: Hinges for prominent doors
Arrangement of cabinets: Hinge for single cabinets
Installation circumstances: Prominent hinge...
€8.93
8,93 € tax excl.
Button closure in chrome-plated zamak without seal.
€8.03
8,03 € tax excl.
120° hinge for screw-on fastening for 20 mm door return.
Door position: Hinges for prominent doors
Arrangement of cabinets: Hinge for single cabinets
Installation circumstances: Concealed hinge
Opening angle:...
€12.91
12,91 € tax excl.
135 ° hinge with stop for 20/25 mm doors
€17.21
17,21 € tax excl.
Latch of gray Makrolon, box and flap Delrin gray, gray POM spring.
€5.74
5,74 € tax excl.
Mounting bracket, with screw-on plate, for Senso (+) and E-Senso (+) in silver, similar to RAL 9006
€22.13
22,13 € tax excl.
Gas spring piston Art.12750C, 300 Newton for Senso-Strato-Verso Huwil, replacement for arm mechanisms for kitchen cabinet doors.
Stem diameter 6 mm
Stem length 8.6 cm
Body diameter 15 mm
Body length 11.6 cm...
€22.13
22,13 € tax excl.
Gas spring piston 200 Newton for Senso-Strato-Verso Huwil, replacement for arm mechanisms for kitchen cabinet doors.
Stem diameter 6 mm
Stem length 8.6 cm
Body diameter 15 mm
Body length 11.6 cm
Total length...
€23.77
23,77 € tax excl.
Gas spring piston 400 Newton for Senso-Strato-Verso Huwil, replacement for arm mechanisms for kitchen cabinet doors.
Stem diameter 6 mm
Stem length 8.6 cm
Body diameter 15 mm
Body length 11.6 cm
Total length...
€105.00
105,00 € tax excl.
The HI-93501 is a waterproof thermistor thermometer that measures temperature from -50.0 to 150.0°C (-58.0 to 302.0°F). The included batteries provide up to 4500 hours of continuous use. CAL Check and the Battery...
€72.95
72,95 € tax excl.
The HI-98107 pHep revolutionised the pH industry by providing non-technical personnel with a simple, inexpensive solution to accurate pH measurement.
This pocket sized pH tester is used to monitor pH in laboratories...
€154.92
154,92 € tax excl.
HI-98331- Soil Test, Groline pocket-sized tester is designed specifically to measure the conductivity and temperature of soil. Featuring a stainless steel rugged and reliable probe.
€16.31
16,31 € tax excl.
180° Screw-on torque hinge zinc-die black powder-coated for countersunk screw M5; friction cone polyacetal POM; screw and nut m.s. zinc-plated.
Adjustable torque
Holds any position continuously at adequate load...
€0.87
0,87 € tax excl.
Hinge anuba steel 13 article 20 SFS intec
€121.23
121,23 € tax excl.
Reversible overlapping hinge to screw in 316 stainless steel with 4mm height adjustment, washer and pin in stainless steel
EMKA 1054-U39
€47.54
47,54 € tax excl.
Lateral hinge 180° wall, rectangular for narrow frame, made of aluminum. With its linear and squared design, it perfectly suits various types of interior doors.
Finishes: Anodized aluminum - Matte white - Traffic...
€42.62
42,62 € tax excl.
Lateral hinge 180° square wall for narrow frame, made of aluminum. With its linear and squared design, it perfectly suits various types of interior doors.
Finishes: Anodized aluminum - Matte white - Traffic white -...
€27.87
27,87 € tax excl.
COMPLETE SET FOR ONE DOOR.
Hinge and pivot for flush wooden doors
article 632684 tropical steel
Load capacity per pair 70 kg
€4.10
4,10 € tax excl.
Key EK 333, nickel silver with black polamide head for EMKA locks.
€9.84
9,84 € tax excl.
Key for insert Square 9, railway version, Zinc die black powder-coated.
€2.87
2,87 € tax excl.
Key for insert square 6 mm, Zinc die black powder-coated.
€3.28
3,28 € tax excl.
Key for insert square 7 mm, Zinc black powder-coated.
€4.10
4,10 € tax excl.
Key for insert triangular 10 mm, Zinc black powder-coated.
€3.28
3,28 € tax excl.
Key for insert triangular 7 mm, Zinc black powder-coated.
€3.69
3,69 € tax excl.
Key for insert triangular 8 mm, Zinc black powder-coated.
€75.00
75,00 € tax excl.
Kit rectangular handle for glass sliding door, made of aluminium. With its linear and squared shapes, it perfectly fits various types of interior doors.
Finish: Matt chrome
Features:
Glass thickness 8 - 10 mm...
€79.90
79,90 € tax excl.
L-handle quarter turn for padlock, Stainless steel AISI 316 Emka 1000-U860
€20.25
20,25 € tax excl.
Maximum precision in tracing the direction of the cut with a practical laser beam that springs from the ring nut to the disk.
For TwinBlade 115 - TwinBlade 160
€16.39
16,39 € tax excl.
LED Strip 5 meter with 1200 led, IP20 - 96W(19,2W/mt) 3000K, Type 35x28 - 12Vdc.
€36.15
36,15 € tax excl.
Anti-woodworm in ready-to-use organic solventTherapy and prevention - Lignex Defend is the anti-itch specially developed to treat wood attacked by the so-called "house capricorn" (Hylotrupes Bajulus). Its special...
€42.94
42,94 € tax excl.
COMPLETE CRANKSET FOR ONE DOOR
Adjustable hinge and pivot for flush wooden doors
article 1272272 galvanized
€22.30
22,30 € tax excl.
One-component polyurethane water-based varnish for parquet, interior and furniture coverings
Yield: 8 - 10 m² / l
Dry to the touch after about 20 minutes
€14.67
14,67 € tax excl.
COMPLETE KIT FOR ONE DOOR (1 left hinge + 1 right hinge)
Hinge and pivot for flush wooden doors
article 954008 matt nickel-plated steel
article 1272496 brass-plated steel
Load capacity per pair 50 kg
€34.84
34,84 € tax excl.
Profile inox 8PI1-32 for Profile-gasket magnetic 8PT8-60/61, length 2200 mm
It is mounted as a support opposite to the magnetic profile applied to the shower door.
Measures looks image.
€33.91
33,91 € tax excl.
Profile-gasket magnetic 180° for shower box, glass thickness 6-8 mm, length 2200 mm 8PT8-50
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€46.45
46,45 € tax excl.
Profile-gasket magnetic for angle 135°, North-South for shower box, glass thickness 6-8 mm, length 2200 mm 8PT8-70/71
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€39.89
39,89 € tax excl.
Profile-gasket magnetic for angle 90° North-South for shower box, glass thickness 6-8 mm, length 2200 mm 8PT8-60/61
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€45.33
45,33 € tax excl.
Profile-gasket magnetic for angle 90°, North-South for shower box, glass thickness 8-10 mm, length 2500 mm 8PT1-60/61
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€31.07
31,07 € tax excl.
Profile-gasket stop 180° for shower box, glass thickness 6-8 mm, length 2200 mm 8PT8-45
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€28.69
28,69 € tax excl.
Stop Profile-gasket 90° for shower box, glass thickness 6-8 mm, length 2500 mm 8PT8-40
It is mounted to the shower door prevents the exit of the water.
Measures looks image.
€6.96
6,96 € tax excl.
Profile for sheet metal and edges PVC 70 ° ± 5 Shore A blackmaterial: PVC 70 ° ± 5 Shore ASurface and color: blackProduct type: edge protectionSeal type: edge protectionThe clamping edge is or up to: 4Clamping edge...
€4.44
4,44 € tax excl.
Profile for sheet metal and edges PVC 70 ° ± 5 Shore A blackin black PVC 1010-000002 reinforced with metal core
€13.24
13,24 € tax excl.
HYDROGRUND PLUS colorless fund fungicide impregnating water based preventively protects the wood against blue stain, mildew and fungus destructors. It is ideal for the preventive treatment of outer wood , provided...
€15.57
15,57 € tax excl.
Amonn Aqua Lignex water-based protective impregnating agent for exterior wood
For impregnation work on wood not with dimensional stability and not in direct contact with the ground or with water such as cladding,...
€20.30
20,30 € tax excl.
Long screwable three-piece 180 ° hinge with 2 holes 8.4 mm in galvanized steel, pin and washer in nickel-plated brass 1039-U15 EMKA
Length 91 mm, Height 55 mm
€10.66
10,66 € tax excl.
Sealing profile in NBR 80 ° Shore A for 6 mm glass and 2 mm sheet metal, with Z shape for sealing profiles
€1.56
1,56 € tax excl.
Hinge anuba 14 steel door and window frames SFS intec wheelbase 13.6 mm
€113.31
113,31 € tax excl.
SFS intec Set - Wire Application - matched 13/14
€113.31
113,31 € tax excl.
Set - wire application - matched by 9/11 for doors and window frames SFS intec
€3.20
3,20 € tax excl.
Adjustable hinge 11R by 14 for wooden doors and windowsAdjustable 0/+3 mm in height, +/- 3 mm laterally and in depth
€39.05
39,05 € tax excl.
15 mm door closer with two strips for flush fire doors
€167.65
167,65 € tax excl.
Set - knocker application for adaptable hinges 14 SFS intec for 11 R
€1.35
1,35 € tax excl.
Hinge anuba 16 steel for door and window frames SFS intec distance 15.6 mm
€1.78
1,78 € tax excl.
Hinge Anuba Z Steel 14 for door and window frames SFS intec center distance 13.6 mm
Stem off-axis for special applications.
€12.55
12,55 € tax excl.
Hinge stainless steel Anuba 14 for door and window frames SFS intec wheelbase 13.6 mm
Showing 1-90 of 148 item(s)
Italiano
Français
Deutsch
Español