Filter By
Filter By
Home
Filter By
€29.00
29,00 € tax excl.
FEATURES:
Lock (ambivalent to the right and left) with shaped cylinder 22.00.60
Steel front tropicalized 25 mm wide and 211 mm long panel board
Inlet size: 60 mm
Lock box Base 100 mm x high 130 mm
Tropicalized...
€4.92
4,92 € tax excl.
Adhesive gasket for PVC armored doors. A high-strength double-sided adhesive is applied to the rigid co-extruded base.
Measures looks image.
€52.46
52,46 € tax excl.
3 bolts lock with 36 mm stroke Heavy series. Key, handle and knob entry 60 mm, application of any European cylinder with compatible profile.
Dimensions as per pictures.
€50.82
50,82 € tax excl.
Contains: 3 wrenches 116 mm + Atra Mia system block + extractor and black handle
€27.87
27,87 € tax excl.
Universal safety protection for European cylinder armored door on the outside, suitable for reinforcing the tightness of the key cylinder, used for mounting on locks with 31 mm screw hole distance between centers...
€25.98
25,98 € tax excl.
Universal safety protection for European cylinder armored door on the outside, suitable for reinforcing the tightness of the key cylinder, used for mounting on locks with 38 mm screw hole distance between centers...
€174.59
174,59 € tax excl.
The V 1600 door stop is specific for doors with hinged leaves, right and left, flush and overlapping, designed for mounting on the front of the door with a vertical direction.
X dimension; Hook 1009 for flush...
€65.57
65,57 € tax excl.
Double bit triple lock for application with latch operated by handle square 8 and key, Heavy series. Key and handle entry 70 mm.
Available lock:
Right SER 7111 1DE
Left SER 7112 1SE
Dimensions as per...
€114.75
114,75 € tax excl.
Double bit DOUBLE lock for application with keyhole lock, double bit keys and additional deadbolt. Key entry and handle 70 mm.
Available lock:
Right SER 7161 1DE
Left SER 7162 1SE
Measurements as per...
€5.74
5,74 € tax excl.
Oval key in nickel, Fiat type in die-cast metal, length 6 cm.
€105.00
105,00 € tax excl.
The HI-93501 is a waterproof thermistor thermometer that measures temperature from -50.0 to 150.0°C (-58.0 to 302.0°F). The included batteries provide up to 4500 hours of continuous use. CAL Check and the Battery...
€72.95
72,95 € tax excl.
The HI-98107 pHep revolutionised the pH industry by providing non-technical personnel with a simple, inexpensive solution to accurate pH measurement.
This pocket sized pH tester is used to monitor pH in laboratories...
€154.92
154,92 € tax excl.
HI-98331- Soil Test, Groline pocket-sized tester is designed specifically to measure the conductivity and temperature of soil. Featuring a stainless steel rugged and reliable probe.
€86.07
86,07 € tax excl.
Composition for Dierre security door, Dierre Design complete with external fixed knob with plate and internal handle with plate and knob for opening limiter for cylinder lock.
Finishes: Silver - Bronzed - Polished...
€159.00
159,00 € tax excl.
Composition for Dierre security door, Dierre Design complete with external fixed knob with plate and internal handle with plate and knob for opening limiter for double-bit lock.
Finishes: Silver - Bronzed - Polished...
€49.18
49,18 € tax excl.
92mm keys + Atra lock Mia system
€60.66
60,66 € tax excl.
with 2 keys 92mm + 1 folding key with key ring + Atra block Mia system
€54.10
54,10 € tax excl.
3 bolts lock with 36 mm stroke Heavy series. Key entry, handle and knob 70 mm, application of any European cylinder with compatible profile.
Dimensions as per pictures.
€9.84
9,84 € tax excl.
The lock for multiple lockings with double tongue and blade mechanism has a central rotor with 5 blades placed inside a zinc alloy box called stator, bushing or body. The double flange is drilled to allow the lock to...
€8.20
8,20 € tax excl.
Lockable handle length 28 mm in zinc alloy suitable for the insertion of 30 and 40 mm hook padlocks (5-7 mm shackle diameter). Thanks to the various lengths of the lockable cylinder, it is possible to apply it on both...
€35.25
35,25 € tax excl.
FEATURES:
Mortice lock for aluminum doors and windows
Nickel steel front 16-20 mm wide and 156 mm long panel board
Inlet sizes available: 16-21 mm
Lock box Base *L mm x height 100 mm
Backplate painted nickel...
€17.36
17,36 € tax excl.
FEATURES:
Lock (ambivalent to the right and left) with cylinder and 2 keys art. 91.01.75
Nickel steel front 20 mm wide and 160 mm long panel board
Inlet size: 20 mm
Lock box Base 36,2 mm x high 104 mm
Nickel...
€42.62
42,62 € tax excl.
FEATURES:
Lock (ambivalent to the right and left) with cylinder
Nickel steel front 20 mm wide and 160 mm long panel board
Inlet size: 20 mm
Lock box Base 36,2 mm x high 104 mm
Nickel backplate and steel...
€60.74
60,74 € tax excl.
FEATURES:
Lock (ambivalent to the right and left) with reversible latch
Brushed lacquered brass front 25 mm wide and 310 mm long panel board
Inlet size: 70 mm
Lock box Base 113 mm x high 208 mm
Bolt 1C
€53.28
53,28 € tax excl.
CHARACTERISTICS:
Lock (ambivalent) with cylinder
Chromed steel front 21 mm wide and 120 mm long square edge
Available entry sizes: 40-50-60-70 mm
Box: Base *L mm x Height 57 mm
Chromed steel counterplate...
€40.98
40,98 € tax excl.
CHARACTERISTICS:
(Ambivalent) mortise lock with cylinder
Satin brass front 22 mm wide and 194 mm long square edge
Available entry sizes: 40-50-60-70 mm
Box: Base *L mm x Height 110 mm
Counterplate in painted...
€1.23
1,23 € tax excl.
Key type TRG Small in plastic.
Measures looks image.
€5.74
5,74 € tax excl.
Small universal spanner lock with cam 43 mm in die-cast metal . Cam with screw, washer and nut. Cam not assembled.
Key rotation 90 ° - 2 extractions
Measures looks image.
€8.03
8,03 € tax excl.
Spanner lock with flap single horizontal and control 30 mm DK for drawer unit, in die-cast metal. Nickel body. Equipped with 2 brass keys SCHG05082, control 30 mm DK and nickel finishing ferrule.
Measures looks image.
€3.69
3,69 € tax excl.
Universal spanner lock imprint closure Fiat with lever 43 mm, in die-cast metal. Nickel body. Equipped with lever Q7 int. 43 and nut.
Key rotation 90 ° - 2 extractions
Measures looks image.
€4.92
4,92 € tax excl.
Universal spanner lock square head with flat lever 30 mm KD, in die-cast metal. Nickel body. Equipped with 2 brass keys SCHG05082, lever Q7 int. 40 and nut.
Key rotation 90 ° - 1 extraction
Measures looks image.
€8.20
8,20 € tax excl.
The 1/4 turn triangular impression lock with adjustable cam is composed of a zinc alloy body inside which there is a spring-loaded rotor that, moved by a key, rotates determining the opening or closing. A 74 mm iron...
€5.74
5,74 € tax excl.
Oval key in nickel, Fiat type in die-cast metal, length 6 cm.
€8.20
8,20 € tax excl.
Lock for mailboxes in die-cast metal. Black painted ferrule, nickel rotor. Equipped with 2 brass keys SCHG05082, lock yoke and cranked lever Q7 int. 34 .
Key rotation 90 ° - 1 extraction
Measures looks image.
€14.75
14,75 € tax excl.
Pin with spring + dowel + key for loading; for REI hinges for fire doors.
Dimensions:
Total pin length 15,8 cm
Body diameter 19,10 Ø mm
€5.74
5,74 € tax excl.
Model IC 12 Varec - Milan
Attraction force 6 Kg
Recessed application, vertically or horizontally, perfectly aligned with the connecting bar applied to the frame. For furniture larger than standard size. Articulated...
€4.92
4,92 € tax excl.
Model ICN 10 Varec - Milan
Attraction force 3 Kg
Recessed application. For wooden or plastic furniture with overlapping door. The recessing can be done vertically or horizontally and must perfectly align with the...
€4.10
4,10 € tax excl.
Model UCN 10 Varec - Milan
Attraction force 3.5 Kg
Surface-mounted application. For medium-sized furniture with recessed door, with the possibility of horizontal or vertical installation, preferably aligned with the...
€5.66
5,66 € tax excl.
Slatted oval. 90° clockwise rotation, 2 key extractions (open/closed). Die-cast metal material.
Finishing: nickel-plated rotor, black painted bushing
Supplied accessories:
2 brass keys SCHG05082
Sling bar with 2...
€15.57
15,57 € tax excl.
Modello rotondo in esecuzione metallica con magnete corazzato a forte attrazione per attrezzature metalmeccaniche. Foro e svasatura centrale per il fissaggio.
€4.10
4,10 € tax excl.
Modello rotondo in esecuzione metallica con vite centrale e dado di fissaggio. Magnete permanente corazzato per arredamenti ed attrezzature metalliche.
€117.21
117,21 € tax excl.
Application lock, keyway, cylinder and handle 60 mm with additional deadbolt.
Cylinder not included.
Main photo identifies right-hand lock.
Measures looks image.
€49.18
49,18 € tax excl.
3 bolts lock with 36 mm stroke Heavy series. Key entry, handle and knob 60 mm, application of any European cylinder with compatible profile.
Dimensions as per pictures.
€52.46
52,46 € tax excl.
3 bolts lock with 36 mm stroke Heavy series. Key entry, handle and knob 70 mm, application of any European cylinder with compatible profile.
Dimensions as per pictures.
€40.98
40,98 € tax excl.
CHARACTERISTICS:
Lock with reversible latch
Nickel-plated steel front 16-20 mm wide and 210 mm long square edge
Available entry sizes: 16-21 mm
Box: Base *L mm x Height 154 mm
Nickel-plated steel...
€5.90
5,90 € tax excl.
Round model in metal execution with various forces of attraction in relation to the needs of use. Adjustment and adjustment thread, nut and fixing ring nut. Particularly suitable for metal panels, drawer units,...
€65.57
65,57 € tax excl.
Double bit triple lock for application with latch operated by handle square 8 and key, Heavy series. Key and handle entry 70 mm.
Available lock:
Right SER 7111 1DE (R)
Left SER 7112 1SE (L)
Dimensions as...
€8.20
8,20 € tax excl.
Universal lock M.9 with mounted lever, T6 impression closure in die-cast metal. Black painted body, chrome-plated spindle. Equipped with bent lever and nut. 90° key rotation - 2 extractions.
Key included.
Measures...
€122.13
122,13 € tax excl.
The V 1600 door stop is specific for doors with hinged leaves, right and left, flush and overlapping, designed for mounting on the front of the door with a vertical direction.
X dimension; Hook 1009 for flush...
€131.15
131,15 € tax excl.
The V 1600 door stop is specific for doors with hinged leaves, right and left, flush and overlapping, designed for mounting on the front of the door with a vertical direction.
X dimension; Hook 1009 for flush...
€57.50
57,50 € tax excl.
It's specific for fire doors is intuitive and reversible.
Weight: max. 200 kg for each door leaf, width up to 1.60 m for each door leaf. Overall width: on the lintel of the door 30 mm. Working angle: from 30 ° to 70...
€63.11
63,11 € tax excl.
Hanna Checktemp 1 (HI-98509) is a compact food probe with a stainless steel sensor on a 1m flexible cable. Highly accurate it is designed to take fast response temperature measurements in semi-solids and liquids. The...
€45.90
45,90 € tax excl.
Strengths:
New and modern design
Adjustable entry: 50, 60, 70 and 80 mm
Right and left reversible, excluding the version with deadbolt: the lock can be turned over with a few quick settings
Multifunction: with...
€102.46
102,46 € tax excl.
Gear lock for application, double security lock, reversible, prepared for electric release, 1 additional deadbolt, cylinder and handle entry 70 mm.
Measurements as per pictures.
€17.13
17,13 € tax excl.
Black plastic swing door lock with 2 keys, snap-fit. Key rotation 90° - 2 extractions Handle Rotation 90° Clockwise/Counterclockwise Available with black case and grey handle Measurements as per pictures.
€200.82
200,82 € tax excl.
The HALO2 Wireless pH Tester is designed to bring simplicity and sophistication to pH testing in a variety of settings and environments.
HI9810322 was developed for the analysis of cheese and semi-solid foods....
€27.05
27,05 € tax excl.
Hinge with spring for fire door Split and Twin 32 01.03.18
Out-of-StockSold out
€61.23
61,23 € tax excl.
FEATURES:
Lock (ambivalent) mortise cylinder and latch
Satin brass front 25 mm wide and 245 mm long panel board
Inlet sizes available: 40-50-60-70 mm
Lock box Base (changes with the variation of the Inlet) mm x...
Out-of-StockSold out
€27.93
27,93 € tax excl.
FEATURES:
Lock (ambivalent) mortise cylinder and roller
Painted brass front 21 mm wide and 157 mm long panel board
Inlet sizes available: 50-60 mm
Lock box Base (changes with the variation of the Inlet) mm x...
Out-of-StockSold out
€41.56
41,56 € tax excl.
FEATURES:
Lock (ambivalent to the right and left) with shaped cylinder 22.00.60
Stainless steel front 25 mm wide and 211 mm long panel board
Inlet size: 60 mm
Lock box Base 100 mm x high 130 mm
Stainless...
Out-of-StockSold out
€163.93
163,93 € tax excl.
FEATURES:
Mortice lock(Ambivalent to the right and left)with cylinder art. 22.00.60
Square front galvanized steel 30 mm wide and 192 mm long
Inlet size: 90 mm
Lock box Base 140 mm high x 109 mm
Backplate and 3...
Out-of-StockSold out
€163.11
163,11 € tax excl.
FEATURES:
Lock Right 380.90.01 and Left 380.90.02
Double external fixed cylinder length 50 mm
Inlet size: 90 mm
Lock box Base 144 mm high x 112 mm
Backplate and 3 keys included
Hook nickel steel
Function...
Out-of-StockSold out
€245.90
245,90 € tax excl.
The FC2022 HALO is a pH and temperature electrode which incorporates a Bluetooth transmitter to wirelessly connect to an iPad or the Hanna Edge-Blu pH tablet meter.
No need for a pH meter
Free to use Hanna Lap App...
Out-of-StockSold out
€40.16
40,16 € tax excl.
FEATURES:
Mortice lock with adjustable roller
Nickel steel front 16-20 mm wide and 210 mm long panel board
Inlet sizes available: 16-21 mm
Lock box Base *L mm x height 154 mm
Backplate painted nickel steel
1...
Out-of-StockSold out
€87.70
87,70 € tax excl.
FEATURES:
Lock zinc-plated 3 locking points(ambivalent to the right and left) with cylinder
Chrome steel front 25 mm wide and 350 mm long panel board
Inlet size: 60 mm
Lock box Base 123 mm x high 208 mm...
Out-of-StockSold out
€67.62
67,62 € tax excl.
FEATURES:
Lock (ambivalent to the right and left) with reversible latch and threelocking points
Brushed lacquered brass front 25 mm wide and 310 mm long panel board
Inlet size: 70 mm
Lock box Base 113 mm x high...
Out-of-StockSold out
€48.93
48,93 € tax excl.
FEATURES:
Mortice lock (ambivalent) with cylinder
Chrome steel front 21 mm wide and 120 mm long panel board
Inlet sizes available: 45-50-60-70 mm
Lock box Base *L mm x height 57 mm
Backplate painted chrome steel...
Out-of-StockSold out
€7.30
7,30 € tax excl.
Adjustable spanner lock imprint closure hexagonal with lever 90° AS int. 38 mm, in die-cast metal. Nickel body. Equipped with lever AS int. 38 and nut.
Key rotation 90 °
Measures looks image.
Out-of-StockSold out
€4.10
4,10 € tax excl.
Oval key in nickel, Fiat type in die-cast metal, length 6 cm.
Out-of-StockSold out
€13.93
13,93 € tax excl.
Oval spanner lock fixing spring with bush for drawer unit, in die-cast metal. Nickel body. Equipped with 2 brass keys SCHG05082, snap spring and bush.
Measures looks image.
Out-of-StockSold out
€185.25
185,25 € tax excl.
FEATURES:
Lock 4 locking points with 3 keys cod. 40.00.95
Satinated brass, varnished front 25 mm wide and 120 mm long panel board
Inlet sizes available: 60-70 mm
Lock box high 120 mm
Out-of-StockSold out
€117.21
117,21 € tax excl.
Application lock, keyway, cylinder and handle 60 mm with additional deadbolt.
Cylinder not included.
Main photo identifies right-hand lock.
Measures looks image.
Showing 1-75 of 75 item(s)
Italiano
Français
Deutsch
Español