€49.28
49,28 € tax excl.
Reversible stainless steel spring bolt article 300
with automatic closing for iron gates or doors
Filter By
Filter By
Home
Filter By
€27.05
27,05 € tax excl.
Nylon wheel 1 bearing with round groove, Ø 64x80 mm complete with bolt article 400NY.80 / 16 Combi
Measurements as shown in the images.
€24.15
24,15 € tax excl.
The adhesive cushion strip helps to prevent slipping of the guide rail even on smooth materials, while simultaneously protecting the surface of the workpiece from damage. In the event of wear or damage, it should be...
€12.30
12,30 € tax excl.
Adjustable click arm for wasistas window with outward opening
tropicalized steel finish
€8.85
8,85 € tax excl.
505 Combi Automatic Pendulum Metal Adjustable Shutter Stopper
Finish: Black painted - Tropicalized
Length: 150 - 215 mm
Measurements as per pictures.
€4.84
4,84 € tax excl.
Small brass-plated adjustable cremone bolt mechanism from window only central locking lever
article 173 IBFM
€10.66
10,66 € tax excl.
Adjustable click arm for wasistas window with internal opening
tropicalized steel finish
€11.00
11,00 € tax excl.
Adjustable molded hinge from Ø22x150
2 wings with edge to be welded, pin adjustable by bolt,
with large capacity thrust bearing
€7.70
7,70 € tax excl.
Adjustable metal shutter stop with man's head with reversible stop 502
Length: 110 - 180 mm
Measures looks image.
€4.10
4,10 € tax excl.
Spacer / spacer diameter 35 mm for grates adjustable from 30 to 40 mm, in galvanized iron, with hole of 14.5 mm
IBFM article 877
€0.90
0,90 € tax excl.
Adjustable spacer for assembling iron frames article 878, in galvanized steel + Threaded bushing article 878 / A
IBFM article 878 + 878 / A
€12.30
12,30 € tax excl.
Horizontal round small bolt in black painted aluminum with staple and with exposed fixing screws, and digital combination locking system. To be used in order to lock drawers, cabinets, openings or door leaves....
€65.49
65,49 € tax excl.
Amortized wheel with adjustable support for swing gates, easy overlapping type assembly.
IBFM article 489
Capacity: 170 Kg
€376.16
376,16 € tax excl.
Articulated arm for vacuum hose and cable for safe and simplified suction. Perfect for prolonged sanding work. The hose is always carried from above, making the job easier. To be mounted directly on the mobile...
€4.10
4,10 € tax excl.
Chromed metal double-joint hinges for toilet lid and seat
Complete with mounting gaskets
€0.89
0,89 € tax excl.
Ball bearing white- zinc.
Internal diameter measurement (F): 9 - 10 - 11 - 12 - 12.5 - 13 - 14 - 20 mm
Measures looks image.
€10.56
10,56 € tax excl.
15 mm tubular handle in curved iron with rectangular mounting plate and fixing with visible screws
Black painted finish
Available in 180 and 230 mm length
€6.07
6,07 € tax excl.
Double action bolt or bolt in galvanized steel for metal frames for shutters and protected windows, single lever to close the two ways with M8 pitch
IBMF article 422
€1.48
1,48 € tax excl.
Suitable for closing floor lock rods, with protective lock article 475 IBFM
Measure = A
A - internal hole diameter
B - flange width
C - well outside diameter
A mm
6
8
10
12
14
16
18
20
22...
€18.59
18,59 € tax excl.
Cariglione handle 385 Black painted for auction article 393 10x10, for wooden and iron windows Combi
WITHDRAWAL VITHS AT THE PLATE 7 cm
Measures as per images.
€51.92
51,92 € tax excl.
Cariglione 390 galvanized handle for auction article 394 of 14x14 with key lock for wooden and iron windows
Measures as per images.
€33.88
33,88 € tax excl.
Cariglione 390 galvanized handle for auction article 394 of 14x14 without key block with cylinder for wooden and iron windows
Measures as per images.
€114.75
114,75 € tax excl.
Complete kit for opening a window:
- Crank control
- Actuator
- Cable
- Sheath
- Fixing saddle and accessories
- Standard cable and sheath length m.3
For window drives on Wasistas always apply a safety arm.
€58.48
58,48 € tax excl.
Collet for all cutters with a shank diameter of Ø 6 mm.
The union nut is conical and fits perfectly into the router holder
With locking nut
Suitable for Festool MFK/OFK 700 - MFKC 700 - OF 900 - OF 1000 - OF...
€58.48
58,48 € tax excl.
Collet for all cutters with a shank diameter of Ø 8 mm.
The union nut is conical and fits perfectly into the router holder
With locking nut
Suitable for Festool MFK/OFK 700 - MFKC 700 - OF 900 - OF 1000 - OF...
€36.07
36,07 € tax excl.
Materials Components moulded in polyamide resin reinforced with fiberglass. Brass cylinder/rotor.
Measures looks image.
€15.57
15,57 € tax excl.
Cremonese, ambidextrous, for sash opening, with 90° handle rotation and positioning click in open and closed positions.
The GIESSE painting system ensures high mechanical quality as well as color uniformity and...
€12.30
12,30 € tax excl.
Cremonese, unidirectional for tilt and turn windows with 90° handle rotation and positioning click in both open and closed positions.
The GIESSE painting system guarantees high mechanical quality, uniform coloring,...
€16.39
16,39 € tax excl.
Cremonese, ambidextrous, with lowered handle and 120° rotation, designed for outward-opening shutters and situations where internal clearance requires an especially compact mechanism. Supplied as right-hand version,...
€14.75
14,75 € tax excl.
Reversible cremone handle for central gasket systems, with 90° handle rotation and opening/closing positioning notch.
The GIESSE painting system guarantees high mechanical qualities as well as uniformity of colors...
€12.30
12,30 € tax excl.
Cremonese, unidirectional for tilt and turn windows with 90° handle rotation and positioning click in both open and closed positions.
The GIESSE painting system guarantees high mechanical quality, uniform coloring,...
€16.39
16,39 € tax excl.
Ambidextrous cremone bolt, particularly suitable for outward-opening windows and shutters, with a 90° handle rotation and positioning latch in both open and closed positions.
Supplied pre-assembled on the right side,...
€12.30
12,30 € tax excl.
Reversible cremone handle for central gasket systems, with 90° handle rotation and opening/closing positioning notch.
The GIESSE painting system guarantees high mechanical qualities as well as uniformity of colors...
€9.84
9,84 € tax excl.
Cremonese, ambidextrous, for outward openings, with 90° handle rotation and positioning latch in both open and closed positions.
Cremonese body only. Depending on the needs, it can be transformed into a Cremonese for...
€22.13
22,13 € tax excl.
Ambidextrous cremone bolt, for inward-opening windows, with a 90° handle rotation and positioning latch in both open and closed positions.
The use of high-quality die-cast materials, combined with the high...
€12.30
12,30 € tax excl.
Cremonese, ambidextrous, for outward openings, with 90° handle rotation and positioning latch in both open and closed positions.
Applicable to shutter or outward-opening profiles, it does not require the use of...
€16.39
16,39 € tax excl.
Cremonese handle, ambidextrous, for outward openings, with 90° handle rotation and positioning click at opening and closing.
Outward-opening shutter. Supplied right-handed, with 104 mm fixing centre distance. The...
€21.31
21,31 € tax excl.
Black painted zamak cremone handle with key, internal rod application for iron window.
Key lock for window or frame locking.
Available (R) Right - (L) Left.
Measures looks image.
€12.30
12,30 € tax excl.
Cremonese locking mechanism for windows with full 180 ° turn,
brass finish,
article 169 IBFM
€84.43
84,43 € tax excl.
Battery arrest at the end of the galvanized cushioned race to pay for sliding gates article 384 Combi
Measures as per images
€6.71
6,71 € tax excl.
Closing system, heavy galvanized vertical slider bolt to be welded article 220 Combi Arialdo
Length from 200 - 300 mm
€14.75
14,75 € tax excl.
Couple of hinges (the package contains 02 pcs) with automatic double action spring in steel, for Saloon type doors
Available sizes: 75 mm - 100 mm - 150 mm
Finishes available
Black painted steel
Nickel...
€16.39
16,39 € tax excl.
Embedding handle applied to the secondary sash of a sliding window or door.
Allows the overlapping of sashes. Equipped with a 7 mm square spindle and a positioner for handle locking at 0° and 180°. Features a fixing...
€23.77
23,77 € tax excl.
30% fibreglass polyamide, self-extinguishing, Grey colour RAL 7001, reference to Enel technical Specification: DS 4541/1 n. 226714
Measures: 76X40X86 mm
€357.55
357,55 € tax excl.
For precise sawing work with a stop up to a cutting width of 610 mm. Easy attachment to the base table of the CS 50 VB with subsequent fine adjustment. The width extension table is usually fitted on the right.
The...
€278.28
278,28 € tax excl.
The CS 70 VL length extension table can be attached to the rear table side of the CS 70 EB. The saw table is thus extended by 580 mm, and is ideally suited to being a steady support for long workpieces. The length...
€2.58
2,58 € tax excl.
Fisce medium wing hinge to be welded article 240 Combi Arialdo
2 medium wings, right or left fixed pivot
€18.85
18,85 € tax excl.
Recessed handle, ambidextrous, with both manual and automatic locking, allowing lateral closure while also enabling the crossing of the sashes of an aluminum sliding window or door. Slider with green and red surfaces...
€0.82
0,82 € tax excl.
2-wing hinge in bent sheet metal article 100 Combi Arialdo, removable pin and washer
Length from 60 - 80 - 100 - 120 - 140 - 170 - 200 mm
€5.28
5,28 € tax excl.
Closing system, galvanized padlock door bolt article 284 6x16 Combi Arialdo
€1.65
1,65 € tax excl.
7.5x7.5 galvanized square female wrench for table 231 with Combi Arialdo square profile
€3.27
3,27 € tax excl.
Galvanized table for 230 Combi iron doors
lever closure with male control panel
use of closing of inspectionable counter boxes
€12.30
12,30 € tax excl.
Ambidextrous martellina handle for the operation of Casement and Tilt-and-Turn mechanisms.
It is equipped with a positioner for stopping rotation at 90° and 180° and has a 7 mm square spindle with a length of 45 mm....
€13.92
13,92 € tax excl.
Closing system, heavy galvanized padlock door bolt article 286 profile 10x25 Combi Arialdo
€5.44
5,44 € tax excl.
Hinge for gates article 125 Combi Arialdo mm.90
2 open wings, removable pin Ø20, removable washers
€9.30
9,30 € tax excl.
Hinge for gates article 125 Combi Arialdo mm.180
3 open wings, removable pin Ø20, removable washers
€39.93
39,93 € tax excl.
3-wing hinges for heavy and fire rated doors with screwed lid and closing spring. To obtain a greater load capacity it is possible to use more than one pair of hinges, just paying attention to their vertical spacing....
€4.92
4,92 € tax excl.
Ambidextrous hinge for aluminum windows and doors with open joint. For third flush sash, DOMAL 40 profile, height 93 mm. Supplied preassembled, adopts the GIESSE-RAPID fastening system. The special shapes of the hinge...
€20.49
20,49 € tax excl.
Concealed hinge suitable for doors subject to frequent and heavy use. The specially shaped fixing plates ensure maximum grip to the profile. Two-way adjustment on installed door: lateral adjustment (±2 mm) and height...
€0.93
0,93 € tax excl.
Iron hinge to be welded with 3 wings 105 Combi Arialdo, removable pin removable washers
Length from 80 - 100 - 120 - 140 - 170 - 200 mm
€0.78
0,78 € tax excl.
Printed hinge 255 Combi Arialdo 2 wings with edge for welding, pin with fixed washer
Height from 40 - 60 - 80 - 100 - 120 - 140 mm
€4.51
4,51 € tax excl.
Hinge printed with rib from Ø22x25x150
2 wings with edge to be welded
with large capacity thrust bearing
€53.28
53,28 € tax excl.
Hinges for heavy fire rated doors with 3 wings with screwed lid and closing spring
Max load: 2 hinges 150 Kg
€13.03
13,03 € tax excl.
IBFM Free-Occupied Deadbolt art. 37 for bathroom emergency opening, nickel-plated steel
Used in the lever closure of bathroom doors of rooms or trains
€3.11
3,11 € tax excl.
CHP/TR9/CPMI Key for 9 mm triangular insert in black polyamide for street box Conchiglia CPMI-CPTI Series.
€10.66
10,66 € tax excl.
Nylon Hinges for counter or measuring groups.
The kit includes hinges and accessories for CPMI-CPTI Series street cabinet as shown in the photo.
€9.43
9,43 € tax excl.
Nylon Hinges for counter or measuring groups.
The kit includes hinges and accessories for CPRM-CPRT Series street cabinet as shown in the photo.
€21.31
21,31 € tax excl.
Internal hinges fiberglass-reinforced thermoplastic resin (IXEF). Resistance to weather, aging and corrosion. Possibility to stop the door when the door is opened. Increase of the opening door of +10° (from 105° to...
€20.49
20,49 € tax excl.
Alloy hinges for counter or measuring groups.
The kit includes hinges and accessories for CVHP/RTZ-CV4M/E Series street cabinet as shown in the photo.
€49.18
49,18 € tax excl.
From the outside, the key operates the handle slider to open or close the sash. From the inside, the sash lock can be engaged or disengaged directly by operating the slider. The handle is combined with an external...
€15.16
15,16 € tax excl.
Large galvanized adjustable hinge hinge for swing gates article 370 Combi Arialdo
Dimensions:
A: 61
B: 46
C: 35
L: 34-46
€8.20
8,20 € tax excl.
Pedal doorstop with large rubber type art.244, 245, 246 suitable for locking doors and windows, max load 40 Kg
IBFM article 244-245-246
€16.80
16,80 € tax excl.
One-way lever bolt for door profile.
Reversible, it is applied resting on the profile, both on the upper and lower part of the door. 20 mm bolt stroke. Bolt section 8x7 mm. The bolt can be extended using the specific...
€2.70
2,70 € tax excl.
Recessed bolt to screw for railings, lever bolt for metal frames in galvanized steel
IBMF article 420
Front A
from 16mm - 20mm - 24mm
€16.39
16,39 € tax excl.
Materials Components moulded in polyamide resin reinforced with fiberglass. Brass cylinder/rotor.
Key type: CHP/TR9/CPMI
Type of enclosure: CPMI-CPTI
drilling on cassette from 35 to 40 mm
Measures looks...
€2.65
2,65 € tax excl.
Ratchet for medium tropicalized fanlight with open plate (for Art.265/265T/267) to be welded.
Size C: 2-16 mm
Measures looks image.
€5.74
5,74 € tax excl.
Small lock for mailboxes with 5 mm long cylinder and 2 keys included. Suitable for screwing especially onto wooden or metal surfaces. Use to close small openings such as private mailboxes or community boxes.
Opening...
€3.44
3,44 € tax excl.
Multifunction WD40 product protects the metal from rust and corrosion, penetrates and lubricates the blocked parts, eliminates and protects any surface from humidity. Removes grease, tar and glue stains from all...
€62.59
62,59 € tax excl.
Long nylon guide olive with support to be fixed for 452PST Combi sliding gates
Diameter Ø 41x240
€51.92
51,92 € tax excl.
Long olive for nylon guide for 452 Combi sliding gates
Diameter Ø 44x220 fixing by M16 bolt
€19.67
19,67 € tax excl.
Pair of Hinge (the package contains 02 pcs.) with automatic simple action spring in steel, hinge used for door closers
IBFM article 102
Available sizes:
75mm
Door weight for max. 2 hinges 15 Kg
100mm...
€12.30
12,30 € tax excl.
Pair of aluminum handles, ambidextrous with a stop, to be applied to the frame or central strip of the door.
Drilling wheelbase of 43 or 50 mm makes it suitable for profiles with widths of 60 to 75 mm. The compact...
€18.03
18,03 € tax excl.
Pair of aluminum handles, ambidextrous with a stop, to be applied to the frame or central strip of the door.
The dual drilling centers of 43 and 50 mm ensure its applicability on most profiles on the market. The...
€22.95
22,95 € tax excl.
Pair of aluminum handles, ambidextrous with a stop, to be applied to the frame or central strip of the door.
The handle is applicable on profiles with a width from 45 to 55 mm without cutting the square. The handle...
€16.39
16,39 € tax excl.
Pedal doorstop heavy type with double spring, silver painted finish, max load 60 Kg
IBFM article 235
SUITABLE FOR HEAVY DOORS
€2.70
2,70 € tax excl.
Galvanized key for snap latch article 233 Combi
square profile from 6 to 8 with progressive male
€12.30
12,30 € tax excl.
Device for the closure of tilt-and-turn windows with front application, does not require modifications to the profile.
Quick fastening on the sash track through contrast screws. The TWIN ratchet is adjustable in...
€32.79
32,79 € tax excl.
Cremonese-type operation in 3 points. Operable by turning the knob, without the use of a key.
Materials: Components molded in glass-fiber-reinforced polyamide resin. Cylinder/rotor made of brass.
Suitable for street...
€36.89
36,89 € tax excl.
Materials Components moulded in polyamide resin reinforced with fiberglass. Brass cylinder/rotor.
Measures looks image.
€68.85
68,85 € tax excl.
Cremonese-type operation in 3 points. Operable with pin security key encoding 630. Prepared for lock.
Materials: Components molded in glass-fiber-reinforced polyamide resin. Cylinder/rotor made of brass.
Suitable...
Showing 1-90 of 148 item(s)
Italiano
Français
Deutsch
Español