€4.10
4,10 € tax excl.
Chromed metal double-joint hinges for toilet lid and seat
Complete with mounting gaskets
Filter By
Filter By
Home
Filter By
€15.16
15,16 € tax excl.
Lock with 3 closures and with hooks for bars.
Measurement plate 207x20 mm
Measurement striking plate 80x18 mm
Measures looks image.
€2.46
2,46 € tax excl.
Cas article 11 mortise lock for application on drawer and furniture. It represents the family of traditional locks for antique wooden furniture. Round edge in brass-plated steel. 360° rotation. Without key.
Entry 50...
€36.07
36,07 € tax excl.
Materials Components moulded in polyamide resin reinforced with fiberglass. Brass cylinder/rotor.
Measures looks image.
€0.12
0,12 € tax excl.
Z-type cross recessed flat head screw, for chipboard, in case-hardened steel, yellow galvanized (CrVI free) and waxed.
The special PATENTED thread allows for faster, more practical and safer tightening even in the...
€11.39
11,39 € tax excl.
Lock for window with only one closure with inlet 17 mm adjustable up to 20 mm.
Measurement plate 150x18 mm
Measurement striking plate 80x18 mm
Measures looks image.
€23.77
23,77 € tax excl.
30% fibreglass polyamide, self-extinguishing, Grey colour RAL 7001, reference to Enel technical Specification: DS 4541/1 n. 226714
Measures: 76X40X86 mm
€16.31
16,31 € tax excl.
Ashtray to be fixed to the outside wall of offices, institutions and businesses to avoid the dirt of cigarette butts on the ground.The special joint allows, with a simple movement, to empty the cup leaving your hands...
€105.00
105,00 € tax excl.
The HI-93501 is a waterproof thermistor thermometer that measures temperature from -50.0 to 150.0°C (-58.0 to 302.0°F). The included batteries provide up to 4500 hours of continuous use. CAL Check and the Battery...
€72.95
72,95 € tax excl.
The HI-98107 pHep revolutionised the pH industry by providing non-technical personnel with a simple, inexpensive solution to accurate pH measurement.
This pocket sized pH tester is used to monitor pH in laboratories...
€154.92
154,92 € tax excl.
HI-98331- Soil Test, Groline pocket-sized tester is designed specifically to measure the conductivity and temperature of soil. Featuring a stainless steel rugged and reliable probe.
€3.11
3,11 € tax excl.
CHP/TR9/CPMI Key for 9 mm triangular insert in black polyamide for street box Conchiglia CPMI-CPTI Series.
€63.93
63,93 € tax excl.
Kit composed of 5 Packs of waxed bronze plated screws:
CSK screw for chipboard Ø 4 x 40 mm (500 pcs)
CSK screw for chipboard Ø 5 x 50 mm (200 pcs)
CSK screw for chipboard Ø 5 x 60 mm (200 pcs)
CSK screw for...
€57.20
57,20 € tax excl.
Kit composed of 5 Packs of waxed yellow zinc plated screws:
CSK screw for chipboard Ø 4 x 40 mm (500 pcs)
CSK screw for chipboard Ø 5 x 50 mm (200 pcs)
CSK screw for chipboard Ø 5 x 60 mm (200 pcs)
CSK screw for...
€47.35
47,35 € tax excl.
Kit composed of 6 Packs of waxed yellow zinc plated screws Torx:
CSK screw for chipboard Ø 3 x 16 mm (500 pcs)
CSK screw for chipboard Ø 3.5 x 18 mm (500 pcs)
CSK screw for chipboard Ø 3.5 x 25/18 mm (500 pcs)
CSK...
€37.79
37,79 € tax excl.
Kit composed of 6 Packs of waxed bronze plated screws:
CSK screw for chipboard Ø 3 x 16 mm (500 pcs)
CSK screw for chipboard Ø 3.5 x 18 mm (500 pcs)
CSK screw for chipboard Ø 3.5 x 25 mm (500 pcs)
CSK screw for...
€33.61
33,61 € tax excl.
Kit composed of 6 Packs of waxed white galvanized screws:
CSK screw for chipboard Ø 3 x 16 mm (500 pcs)
CSK screw for chipboard Ø 3.5 x 18 mm (500 pcs)
CSK screw for chipboard Ø 3.5 x 25 mm (500 pcs)
CSK screw...
€10.66
10,66 € tax excl.
Nylon Hinges for counter or measuring groups.
The kit includes hinges and accessories for CPMI-CPTI Series street cabinet as shown in the photo.
€9.43
9,43 € tax excl.
Nylon Hinges for counter or measuring groups.
The kit includes hinges and accessories for CPRM-CPRT Series street cabinet as shown in the photo.
€21.31
21,31 € tax excl.
Internal hinges fiberglass-reinforced thermoplastic resin (IXEF). Resistance to weather, aging and corrosion. Possibility to stop the door when the door is opened. Increase of the opening door of +10° (from 105° to...
€20.49
20,49 € tax excl.
Alloy hinges for counter or measuring groups.
The kit includes hinges and accessories for CVHP/RTZ-CV4M/E Series street cabinet as shown in the photo.
€7.31
7,31 € tax excl.
Lever furniture lock with knob closure and hole for padlock insertion.
€16.39
16,39 € tax excl.
Materials Components moulded in polyamide resin reinforced with fiberglass. Brass cylinder/rotor.
Key type: CHP/TR9/CPMI
Type of enclosure: CPMI-CPTI
drilling on cassette from 35 to 40 mm
Measures looks...
€6.14
6,14 € tax excl.
M93 is the rotating rod lock in polymer with three-point locking and screw fixing, for application on right-hinged or left-hinged door. Operates with 360° rotation. The M series represents the family of traditional...
€4.92
4,92 € tax excl.
M98 is the rotating rod lock, with three-point locking and screw or pressure fixing, for application on right-hinged doors or left-hinged doors. The M series represents the family of traditional locks for antique...
€5.90
5,90 € tax excl.
M67 is the bore-in lock for application on right-hand or left-hand door. Operates with 360° rotation. The M series represents the family of traditional locks for antique furniture.
Note: the lock is supplied without...
€7.79
7,79 € tax excl.
Meroni cylinder lock to be applied for furniture, 90° right/left rotation
Cylinder: Length 20 mm
€12.00
12,00 € tax excl.
Meroni lock cylinder to be applied for furniture, rotate 45 ° right/left - two key outputsCylinder: Length 16 mm
€12.00
12,00 € tax excl.
Meroni lock for multiple centralized locking of drawers, 180° rotation - 2 key outputs
€7.38
7,38 € tax excl.
Meroni universal quick-assembly lock, black, 90° right/left rotation, 1 key exit
€9.84
9,84 € tax excl.
2910 US26 Rack lock for glass sliding doors, 180 ° rotation (2 key pull), Thickness 7 mm and 2 keys with cover.
Finishing: Polished chrome
Measures looks image.
€5.74
5,74 € tax excl.
Meroni mortise lock for sliding doors, with hook and directional pin, 120 ° rotation
€5.00
5,00 € tax excl.
Meroni lock for furniture to apply, 360 ° rotation, half box for furniture
€12.00
12,00 € tax excl.
Meroni lock for sliding doors, 120 ° rotation - 2 key outputs Push use with extendable rear pin.
€12.30
12,30 € tax excl.
Meroni lock for sliding doors, 90° right/left rotation – 2 key outputs
€5.74
5,74 € tax excl.
Spare latch for PremiApri Meroni from 60-80-127 mm entry
€36.80
36,80 € tax excl.
Unlocked from outside by emergency key, coin, screwdriver or any other similar tool. Inside knob with thumbturn acting on occupancy indicator if provided. Steel material.
AVAILABLE:
Finishing: Silver painted - Black...
€40.90
40,90 € tax excl.
Locked or unlocked from outside by key. Inside knob with thumbturn. Steel material.
AVAILABLE:
Finishing: Silver painted - Black painted
Package: Only knob - Complete with lock
€33.44
33,44 € tax excl.
Locked or unlocked from both sides by key. Steel material.
AVAILABLE:
Finishing: Silver painted - Black painted
Package: Only knob - Complete with lock
€0.82
0,82 € tax excl.
Meroni T-shaped universal key, smooth for furniture article 0699N
suitable for all 23 series recessed and overlapping furniture locks
€10.00
10,00 € tax excl.
Meroni universal lock with pins in brass, black, 180° right rotation - 2 key outputs
€5.74
5,74 € tax excl.
Tropicalized steel spring safety ratchet
Replacement accessory for wooden folding tables, beer tables, restaurants and wooden benches.
60x70 mm base - Height 37 mm
Slotted hole spacing 40 - 60 mm
€10.66
10,66 € tax excl.
Perfect/t is the mortise lock for application on drawers and right-hinged doors. It represents the traditional family of locks for antique wooden furniture. Rounded brass-plated steel edge. 360° rotation. Keyless....
€10.66
10,66 € tax excl.
Interchangeable cylinder lock Ø 16.5 mm with various customization options. Model 2624 is a lock with a push-button mechanism, for sliding doors with side closure, complete with a fixing clip. Cylinder with 2 round...
€5.92
5,92 € tax excl.
Furniture lock with 90° right rotation, black resin body, 2 keys Art.1804, without cam, internal fold type.Measures looks image.
€32.79
32,79 € tax excl.
Cremonese-type operation in 3 points. Operable by turning the knob, without the use of a key.
Materials: Components molded in glass-fiber-reinforced polyamide resin. Cylinder/rotor made of brass.
Suitable for street...
€36.89
36,89 € tax excl.
Materials Components moulded in polyamide resin reinforced with fiberglass. Brass cylinder/rotor.
Measures looks image.
€68.85
68,85 € tax excl.
Cremonese-type operation in 3 points. Operable with pin security key encoding 630. Prepared for lock.
Materials: Components molded in glass-fiber-reinforced polyamide resin. Cylinder/rotor made of brass.
Suitable...
€59.18
59,18 € tax excl.
Cremonese-type operation in 3 points. Operable with pin security key encoding 630.
Materials: Components molded in glass-fiber-reinforced polyamide resin. Cylinder/rotor made of brass.
Suitable for street cabinets...
€63.11
63,11 € tax excl.
Knob with free-rotation anti-vandal mechanism in the locked position. Cremonese-type operation in 3 points. In standard versions, all cabinets and upper units are equipped with a lock featuring a retractable lever,...
€63.11
63,11 € tax excl.
Knob with free-rotation anti-vandal mechanism in the locked position. Cremonese-type operation in 3 points. In standard versions, all cabinets and upper units are equipped with a lock featuring a retractable lever,...
€52.46
52,46 € tax excl.
Cremonese-type operation in 3 points. In standard versions, all cabinets and upper units are equipped with a lock featuring a retractable lever, operable with a Y21 encryption key for single-compartment cabinets – Y21...
€52.46
52,46 € tax excl.
3-point Cremonese type operation. In the standard versions, all cabinets and overhead cabinets are complete with a lock with a concealed lever that can be operated with a Y12 coded key for single-compartment cabinets...
€58.90
58,90 € tax excl.
With double locking system. Operable with Y21 encryption security key and provision for padlock application (CS/21).
Materials: Components molded in glass fiber reinforced polyamide resin. Cylinder/rotor in brass....
€41.50
41,50 € tax excl.
Flat countersunk head screw, cross recess type Z or pozidrive, for chipboard in A2 stainless steel (AISI 304), particularly suitable for assembling hardware on wood, external wooden structures, assembling chipboard...
-30%
€5.01
€7.16
5,01 € tax excl.
Z-type cross recessed flat head screw, for wood and chipboard, in case-hardened steel, bronzed (CrVI free) and waxed.
The special PATENTED thread allows for faster, more practical and safer tightening even in the...
-30%
€4.31
€6.15
4,31 € tax excl.
Z-type cross recessed flat head screw, for chipboard, in case-hardened steel, white galvanized (CrVI free) and waxed.
The special PATENTED thread allows for faster, more practical and safer tightening even in the...
-30%
€4.17
€5.95
4,17 € tax excl.
Z-type cross recessed flat head screw, for chipboard, in case-hardened steel, yellow galvanized (CrVI free) and waxed.The special PATENTED thread allows for faster, more practical and safer tightening even in the...
€10.65
10,65 € tax excl.
Screw-on lock Meroni 2243 nickel-plated brass
Rotating 360° (2 key pull) Cylinder 20 mm
Applications: right door and left door
Suitable for wood
Applications: R/H and L/H door
€1.56
1,56 € tax excl.
NAS packing tape with silent unwinding for general use, suitable for light and medium packaging in the food and beverage sector and for packing applications. Water-based adhesive, free from solvents and other harmful...
€1.56
1,56 € tax excl.
NAS packing tape with silent unwinding for general use, suitable for light and medium packaging in the food and beverage sector and for packing applications. Water-based adhesive, free from solvents and other harmful...
€6.14
6,14 € tax excl.
M64 is the rod lock for small-sized movable leaves and application on right-hinged door. 360° rotation operation. Round slot edge. Box and back in raw steel. The M series represents the family of traditional locks for...
€12.30
12,30 € tax excl.
Lock with Ø 20 mm brass pin cylinder. The 2B41 model is a universal application lock with a steel body for drawer mounting, complete with a ring nut. Cylinder length (L) 20 mm. Cylinder with 2 keys. Nickel-plated...
€5.74
5,74 € tax excl.
Two-component polyester resin 400 ml styrene, complete with mixer, for heavy and medium-heavy fastening.
€0.66
0,66 € tax excl.
Threaded bar galvanized 1 mt, DIN 976-1 Class 4.8
€33.61
33,61 € tax excl.
Cremonese-type operation in 3 points. In standard versions, all cabinets and upper units are equipped with a lock featuring a retractable lever, operable with a Y21 encryption key for single-compartment cabinets – Y21...
€8.20
8,20 € tax excl.
Lock with Ø 16.5 mm pin tumbler cylinder. Model 2130 is a lock for universal application with polymer body for cabinet door and drawer. Black polymer body, nickel plated brass finish, 2 keys, cylinder length (L) 20...
€7.38
7,38 € tax excl.
Lock with Ø 16.5 mm brass pin cylinder. Model 2131 is a universal application lock with a polymer body.
Cylinder length (L) 20 mm for application on right or left hinged door. Cylinder with 2 keys.
Measures looks...
€12.30
12,30 € tax excl.
Lock for sliding glass with Ø 20 mm cylinder, 90°+90° rotation (2 key outputs), nickel-plated brass finish, 2 KA keys (the same) Art.1804, cylinder length 20 mm.
€10.66
10,66 € tax excl.
Lock with Ø 16.5 mm brass pin cylinder. The 2151 model is a universal surface-mounted lock for multiple uses: mailboxes, industrial applications, lockers, etc. Threaded brass body for mounting with washer and lever....
€0.11
0,11 € tax excl.
Z-type cross recessed flat head screw, for chipboard, in case-hardened steel, brass-plated and waxed.
The special PATENTED thread allows for faster, more practical and safer tightening even in the hardest laminated...
€0.11
0,11 € tax excl.
Screw flat head countersunk footprint Cross type Z, for chipboard, hardened steel, Bronze plated and waxed.
The special PATENTED thread allows a faster, practical and safe clamping even in the toughest laminated woods.
€0.12
0,12 € tax excl.
Flat countersunk head screw, cross recess type Z or pozidrive, for chipboard in A2 stainless steel (AISI 304), particularly suitable for assembling hardware on wood, external wooden structures, assembling chipboard...
€0.11
0,11 € tax excl.
Z-type cross recessed flat head screw, for chipboard, in case-hardened steel, white galvanized (CrVI free) and waxed.
The special PATENTED thread allows for faster, more practical and safer tightening even in the...
€63.11
63,11 € tax excl.
Hanna Checktemp 1 (HI-98509) is a compact food probe with a stainless steel sensor on a 1m flexible cable. Highly accurate it is designed to take fast response temperature measurements in semi-solids and liquids. The...
€10.25
10,25 € tax excl.
Meroni cylinder lock to be applied to two translating rod locks, 360° rotation - 2 key exits
Cylinder : Length 20 mm
Auctions not included
€6.51
6,51 € tax excl.
Lock for filing cabinet, drawers with multiple locks article 2335 Series 23 Meroni black color, size 32 x 16 mm - Includes 2 keys
€18.03
18,03 € tax excl.
Cremonese-type operation with 3 locking points. Each lock is supplied with its own standard key. SCS-SCM series locks are exclusively compatible with CV series cabinets in versions without locks (WL – WLP)....
€27.05
27,05 € tax excl.
With double locking system that can be operated with a triangular key and predisposition for padlock application
Materials: Printing components in polyamide resin reinforced with glass fibers. Brass cylinder /...
€29.51
29,51 € tax excl.
LUCCOTTO is extremely resistant, thanks to its tempered steel structure and coated steel balls, unassailable with any tool. In addition, the TÜV and CNPP certified cylinder adopted by LUCCOTTO gives maximum safety to...
€30.33
30,33 € tax excl.
Security lock in hardened steel, 90 ° rotation, Polished chrome
Stem: Ø 12 mm
Light: 36 mm
LUCCOTTO is extremely resistant, thanks to its tempered steel structure and coated steel balls, unassailable with any...
€200.82
200,82 € tax excl.
The HALO2 Wireless pH Tester is designed to bring simplicity and sophistication to pH testing in a variety of settings and environments.
HI9810322 was developed for the analysis of cheese and semi-solid foods....
Out-of-StockSold out
€20.80
20,80 € tax excl.
Big punch ladle for drain, mounting with handle Ø 26 mm
Out-of-StockSold out
€18.65
18,65 € tax excl.
Big punch ladle for gutter, mounting with handle Ø 26 mm
Out-of-StockSold out
€22.35
22,35 € tax excl.
Big punch ladle for gutter, mounting with handle Ø 37 mm
Out-of-StockSold out
€245.90
245,90 € tax excl.
The FC2022 HALO is a pH and temperature electrode which incorporates a Bluetooth transmitter to wirelessly connect to an iPad or the Hanna Edge-Blu pH tablet meter.
No need for a pH meter
Free to use Hanna Lap App...
Out-of-StockSold out
€15.41
15,41 € tax excl.
The hook is a multipurpose tool that contains all the functions useful for maintenance of joints or manholes generic. The central hook of this tool allows you to raise or anchor any manhole lifting it easily; It is...
Out-of-StockSold out
€14.75
14,75 € tax excl.
Padlockable lock in zamak + plastic, polished nickel-plated body finishes, gray insert. With flat lever. Suitable for padlocks with shackle from Ø4 to Ø8 mm.
Cylinder sizes: 20 - 25 - 30 mm
Measures looks image.
Out-of-StockSold out
€17.45
17,45 € tax excl.
Punch ladle for manhole, mounting with handle Ø 26 MM
Showing 1-90 of 92 item(s)
Italiano
Français
Deutsch
Español