Home

Filter

180 ° screw-on hinge 1055-U4 EMKA in galvanized steel, pin and washer in nickel-plated brass

€11.64

11,64 € tax excl.

180 ° screw-on hinge in galvanized steel, pin and washer in nickel-plated brass 1055-U4 EMKA Length 53 mm, Height 40.2 mm, Distance between mounting holes 38 mm

60x76 mm 180° screw-on hinge for doors EMKA 1056-U27

€14.75

14,75 € tax excl.

2D screw-on hinge zinc die black powder coated; pin stainless steel. Door position: Hinges for flush doors Installation circumstances: Prominent hinge Hinge adjustable: Hinge adjustable 2D - 2D nut useable...

77 QL Lock one throw and hook bolt with cylinder for sliding doors and gates

€29.00

29,00 € tax excl.

FEATURES: Lock (ambivalent to the right and left) with shaped cylinder 22.00.60 Steel front tropicalized 25 mm wide and 211 mm long panel board Inlet size: 60 mm Lock box Base 100 mm x high 130 mm Tropicalized...

Adjustable leveling foot for furniture hidden in the side panel 306 Camar

€4.51

4,51 € tax excl.

CHARACTERISTICS: Maximum recommended load: 300 kg Lifting load: 150 kg Adjustment: 0-25mm Diameter: Ø 14 mm Available sizes ( A ): 70 - 120 mm Requires hex key #4 and screwdriver Article tested by LGA ABS,...

Adjustable plastic foot for furniture article 450 black

€1.57

1,57 € tax excl.

Plastic foot for kitchen furniture, with adjustable height minus 5 mm plus 20 mm with mounting support and integrated base for adjustment. Heights available from 10 - 12 - 15 cm

Backpack with wheels for documents GT Line TOP WALKER

€94.00

94,00 € tax excl.

Practical trolley for documents, notebook, accessories and personal belongings. Features: Internal Configuration: Adjustable shoulder straps Multiple pockets. Ideal for laptop, documents and accessories Large...

Beech wood bread cutter 35x25 cm with crumb tray

€6.48

6,48 € tax excl.

Bread cutter with handles made of beech wood, practical and easy to handle for a clean cut. Dimensions: Length 25 cm Width 38 cm (handles included)

Beech wood coffee tray with refractory insert, Abruzzo craftsmanship

€4.92

4,92 € tax excl.

Flower-shaped coffee tray made of beech wood with a terracotta insert, handcrafted in Abruzzo using high-quality techniques. Dimensions: Length 21 cm Width 16 cm

Beech wood pizza roller with dual rollers, Abruzzo craftsmanship

€4.92

4,92 € tax excl.

Pizza roller made of beech wood, ideal for preparing pizzas and doughs. Dimensions: Length 23 cm Width 13 cm

Beechwood egg cup, handcrafted in Abruzzo

€1.64

1,64 € tax excl.

Small cup in natural light wood, polished and handcrafted in Abruzzo using high-quality techniques. Dimensions: Diameter Ø 38 mm Height 8 cm

Beechwood kitchen fork, handcrafted in Abruzzo

€1.31

1,31 € tax excl.

Three-pronged kitchen fork made of beechwood, handcrafted in Abruzzo using high-quality techniques. Available in 2 sizes: Small: Length 28.5 cm Large: Length 34 cm

Beechwood kitchen spoon, handcrafted in Abruzzo

€1.31

1,31 € tax excl.

Beechwood kitchen and dairy spoon, handcrafted in Abruzzo using high-quality techniques. Available in 2 sizes: Small: Length 26.5 cm Large: Length 33.5 cm

Beechwood mail holder, handcrafted in Abruzzo

€8.20

8,20 € tax excl.

Beechwood mail holder, decorated with two or three pockets, handcrafted in Abruzzo using high-quality techniques. Available in 2 sizes: Small with 2 Pockets: Length 32 cm - Width 20 cm Large with 3 Pockets:...

Beechwood salami slicer, handcrafted in Abruzzo

€3.28

3,28 € tax excl.

Beechwood salami cutting board, with a step, useful for cutting and making the slice fall more easily, handcrafted in Abruzzo using high-quality techniques. Dimensions: Length 33 cm Width 6 cm

Black polyamide lock with lever 1000-U675 EMKA

€8.11

8,11 € tax excl.

Black polyamide lock with lever-tab, 1/4 turn locking, nut fixing with flat gasket and self-tapping screw. 18 mm box lock complete with 3 levers (codes: 1000-5164, 1000-U26, 1000-26).

Built-in levelling foot hidden in the base for 305 Camar furniture

€2.13

2,13 € tax excl.

CHARACTERISTICS: Maximum recommended load: 400 kg Adjustment: 0-20mm Requires hex key no. 6 and special key Article tested by CTBA ABS and zama components Measurements as per pictures.

Camar 40mm Drilled Screw 30840Z10000

€1.23

1,23 € tax excl.

10MA screw drilled internally to allow adjustment of the levelling foot from inside the cabinet, used for assembling the Camar 308 foot in various sizes. Size: 10MA, length 40mm Measurements as per pictures.

CAMAR 809 galvanized iron adjustment key for 308 series furniture leveling foot

€1.64

1,64 € tax excl.

CAMAR 809 galvanized iron key for adjusting the 308 series leveling foot for furniture size: length 200mm, width 80mm, 6mm hexagon Measurements as per pictures.

Citrus juicer with mini handle made of beechwood, handcrafted in Abruzzo

€2.38

2,38 € tax excl.

Ideal for extracting juice from citrus fruits such as oranges, lemons, limes, etc. Round handle that comfortably fits in the palm of the hand, handcrafted in Abruzzo using high-quality techniques. Dimensions: Max...

Concealed leveling foot recessed into the furniture base 304 Camar

€2.05

2,05 € tax excl.

Features: Recommended maximum load 200 Kg Adjustment range 0–10 mm Requires hex adjustment key n°6 or special adjustment key Item tested by CTBA Measures looks image.

Cremone handle with key for armored window

€24.59

24,59 € tax excl.

Cremonese lever handle with through holes, for mounting internal or external rods in black colour Key lock for window or frame locking Cremone bolt with right opening art. 40.9 Cremone bolt with left...

Double-bit insert key 3, powder-coated black zamak Emka 1004-05

€3.69

3,69 € tax excl.

Double-bit insert key 3, powder-coated black zamak Emka 1004-05

EMKA 1011-05 sealing gasket with front rabbet - per meter

€7.38

7,38 € tax excl.

Black EPDM gasket (EPDM 65 ° ± 5 Shore A) material: foam rubber EPDM; clamping profile EPDM 65° ± 5 Shore A Surface and colour: black Seal balloon / seal body: Yes Position sealing element: top Product type:...

EMKA 1011-06 gasket, self-locking foam rubber EPDM with side stop

€7.38

7,38 € tax excl.

material: EPDM foam; tightening profile EPDM 65 ° ± 5 Shore ASurface and color: blackSeal flask / seal body: YesPosition the sealing element: lateralType of product: sealType of gasket: self-locking clip profileThe...

EMKA 1032-U6 galvanized steel hinge

€9.02

9,02 € tax excl.

135 ° hinge for doors with 22 mm rabbet

EMKA 1034-U00001 galvanized steel snap lock only latch

€17.21

17,21 € tax excl.

Snap lock in galvanized steel, tongue and square in rough zamak, spring in galvanized steel.Door version: right, leftType of blocking system: block-blockmaterial: steelSurface and color: galvanizedInstallation...

EMKA 1036-U4 Profile hinge zinc plated with weld-on stud raw

€8.11

8,11 € tax excl.

Profile hinge zinc plated with weld-on stud raw cover stainless steel. Door position: Hinges for prominent doors Arrangement of cabinets: Hinge for single cabinets Installation circumstances: Prominent hinge...

EMKA 1047-U2 closure button

€8.93

8,93 € tax excl.

Button closure in chrome-plated zamak without seal.

EMKA 1069-U6 Hinge zinc plated

€8.03

8,03 € tax excl.

120° hinge for screw-on fastening for 20 mm door return. Door position: Hinges for prominent doors Arrangement of cabinets: Hinge for single cabinets Installation circumstances: Concealed hinge Opening angle:...

EMKA 1069-U7 galvanized steel hinge

€12.91

12,91 € tax excl.

135 ° hinge with stop for 20/25 mm doors

EMKA 1080-U2 plastic latch

€17.21

17,21 € tax excl.

Latch of gray Makrolon, box and flap Delrin gray, gray POM spring.

Flower-shaped trivet in beech wood with refractory insert, Abruzzo craftsmanship

€4.92

4,92 € tax excl.

Flower-shaped trivet made of beech wood with a terracotta insert, handcrafted in Abruzzo using high-quality techniques. Dimensions: Length 23.5 cm Width 18 cm

Giant pencil holder for pens and pencils in beechwood, handcrafted in Abruzzo

€4.92

4,92 € tax excl.

Giant pencil holder with 4 holes for pens and pencils, made of beechwood, handcrafted in Abruzzo using high-quality techniques. Dimensions: Width 4 cm Height 4 cm Length 20 cm

GT Line ALC /170 Aluminium cold bent body Professional tool case

€258.20

258,20 € tax excl.

Construction technique based on an unique aluminium cold bent body 15/10 mm. thickness.The reinforcements in chromed iron, the corrosion resistant aluminium “L” section extrusions and the rivets positioned ad hoc in...

GT Line ATOMIK 215 PEL High thickness polypropylene tool case

€175.41

175,41 € tax excl.

Technologically advanced, injection moulded, high thickness Polypropylene tool case. This material makes the case extremely resistant against chemical corrosion, shock, high and low temperature. The injection...

GT Line BOMBER 170 PEL Double wall polyethylene tool case

€190.16

190,16 € tax excl.

The double wall construction and the body in shock-proof high density, with resistance to high and low temperatures and to most of the corrosive chemical substances, grant the highest levels of reliability on the...

GT Line FLASH 2 PEL Professional tool case

€105.74

105,74 € tax excl.

Injection moulded ABS walls with strong aluminum construction frame. Great resistance.

GT Line FORCE BOX 18 polyethylene Tool box

€72.95

72,95 € tax excl.

Double wall construction HDPE box, studied to resist even in the most extreme use conditions. Great resistance to high and low temperatures and to most of the corrosive chemical substances. A B...

GT Line METAL LITE PEL Aluminium professional tool case

€168.85

168,85 € tax excl.

Professional, lightweight tool case with thick steel corners and metal reinforcements on the profile to grant absolute protection. A B C D Emm 465 343 170 70 100 Measures looks image.

GT Line PSS COMPACT BAG Tool shoulder bag

€64.75

64,75 € tax excl.

Compact tool bag with two removable PSS tool pallets. Adjustable shoulder strap and large side pockets. Two small component boxes included.

GT Line SOFT PILOT Tool and laptop bag

€80.25

80,25 € tax excl.

Pilot multipurpose tool and laptop bag with adjustable shoulder strap. Vertical access storage. Main compartment to accommodate a laptop up to 15.6''. Front and back compartment for tool storage with pouches and...

GT Line TOOL TROLLEY 01 N Tool Trolley backpack

€114.75

114,75 € tax excl.

Tool trolley/backpack designed for carrying tools and a 15'' notebook. 2 frontal pouches for documents and accessories. Large wheels and easily extractable telescopic handle. Extractable rear straps transform the...

GT Line TOP BASKET M Tool basket

€42.62

42,62 € tax excl.

Tool basket with tool pouches. Adjustable shoulder strap and robust metal handle. Swing down front and rear walls to keep a 90° opening.

Guitar pasta cuts beechwood Abruzzo handicraft

€13.00

13,00 € tax excl.

Guitar pasta cuts obtained by cutting the best beeches, handcrafted in Abruzzo according to high-quality techniques. Dimensions: Length 47 cm (including screws) Width 23 cm Height 7,5 cm Features: It's a...

Ham holder utensil made entirely of untreated wood

€17.13

17,13 € tax excl.

Ham holder made by cutting the finest beechwood, handcrafted in Abruzzo using high-quality techniques. Dimensions: Base: Length 40 cm - Width 19 cm - Height 2.5 cm Handle: Length 64 cm - Width (with handle...

Handmade faesite box, Abruzzese craftsmanship

€5.90

5,90 € tax excl.

Box made of faesite, handcrafted in Abruzzo using high-quality techniques. Available in: Small: Length 17.5 cm - Width 11 cm - Height 6 cm Medium: Length 29 cm - Width 17 cm - Height 7.5 cm Large: Length 33 cm -...

Handmade untreated beech wood flat tray

€5.57

5,57 € tax excl.

Tray made by cutting the finest beech trees, handcrafted in Abruzzo using high-quality techniques. Available in 2 sizes: Small 30x17 cm Large 35x17 cm

HANNA Instruments - HI93501 Thermistor Thermometer with probe FC762PW

€105.00

105,00 € tax excl.

The HI-93501 is a waterproof thermistor thermometer that measures temperature from -50.0 to 150.0°C (-58.0 to 302.0°F). The included batteries provide up to 4500 hours of continuous use. CAL Check and the Battery...

HANNA Instruments - HI98107 pHep pH Pocket Tester

€72.95

72,95 € tax excl.

The HI-98107 pHep revolutionised the pH industry by providing non-technical personnel with a simple, inexpensive solution to accurate pH measurement. This pocket sized pH tester is used to monitor pH in laboratories...

HANNA Instruments - HI98331 SOIL TEST, GroLine Direct Soil Conductivity (EC) & Temperature Tester

€154.92

154,92 € tax excl.

HI-98331- Soil Test, Groline pocket-sized tester is designed specifically to measure the conductivity and temperature of soil. Featuring a stainless steel rugged and reliable probe.

Hinge 40x40 mm 180° with clutch in black alloy EMKA 1056-U6-01

€16.31

16,31 € tax excl.

180° Screw-on torque hinge zinc-die black powder-coated for countersunk screw M5; friction cone polyacetal POM; screw and nut m.s. zinc-plated. Adjustable torque Holds any position continuously at adequate load...

Hinge in stainless steel 180 ° screwable with regulation PROGRAM 1054 EMKA

€121.23

121,23 € tax excl.

Reversible overlapping hinge to screw in 316 stainless steel with 4mm height adjustment, washer and pin in stainless steel EMKA 1054-U39

Honey dipper in beech wood, Abruzzo craftsmanship

€0.82

0,82 € tax excl.

Honey dipper dispenser made of beech wood, suitable for pairing with smaller jars, honey favors, and wedding favors. Available in 2 sizes: Small 8 cm Large 11.5 cm

Iron foot for furniture with adjustable base to screw 350 Camar

€2.38

2,38 € tax excl.

FEATURES: Adjustment: less 5 mm -20 mm Diameter: Ø 28 mm Available heights (H): 10 - 12 - 15 cm Adjustment can both internally and externally Components ABS and steel Measures looks image.

Key EK 333, nickel silver with black polamide head 1108-U35 EMKA

€4.10

4,10 € tax excl.

Key EK 333, nickel silver with black polamide head for EMKA locks.

Key for insert railway, Zinc die black 1004-52 EMKA

€9.84

9,84 € tax excl.

Key for insert Square 9, railway version, Zinc die black powder-coated.

Key for insert square 6 in Zinc black 1004-18 EMKA

€2.87

2,87 € tax excl.

Key for insert square 6 mm, Zinc die black powder-coated.

Key for insert square 7 in Zinc black 1004-01 EMKA

€3.28

3,28 € tax excl.

Key for insert square 7 mm, Zinc black powder-coated.

Key for insert triangular 10 in Zinc black 1004-24 EMKA

€4.10

4,10 € tax excl.

Key for insert triangular 10 mm, Zinc black powder-coated.

Key for insert triangular 7 in Zinc black 1004-03 EMKA

€3.28

3,28 € tax excl.

Key for insert triangular 7 mm, Zinc black powder-coated.

Key for insert triangular 8 in Zinc black 1004-04 Emka

€3.69

3,69 € tax excl.

Key for insert triangular 8 mm, Zinc black powder-coated.

Key-shaped plywood key holder, handcrafted in Abruzzo

€3.69

3,69 € tax excl.

Key-shaped plywood key holder with 4 hooks, handcrafted in Abruzzo using high-quality techniques. Dimensions: Width 25 cm Height 9 cm

Kit handmade pasta cutting guitar and smooth beechwood rolling pin for fettuccine, tonnarelli, etc.

€13.11

13,11 € tax excl.

Homemade pasta kit including: chitarra pasta cutter, a traditional Abruzzese tool used to make spaghetti alla chitarra or maccheroni alla chitarra. It consists of steel strings stretched over a wooden frame and a...

Kit small pasta cutting guitar and smooth beechwood rolling pin for fettuccine, tonnarelli, etc.

€11.80

11,80 € tax excl.

Homemade pasta kit including: Pasta cutting guitar, a traditional Abruzzese tool used to make spaghetti alla chitarra or maccheroni alla chitarra. Made with steel wires tightly stretched on a wooden frame. Smooth...

Kitchen tool kit meatball mold + pasta cutting chitarra + smooth rolling pin

€30.25

30,25 € tax excl.

Kitchen kit consisting of: Poldino Polpettino, a kitchen utensil that allows you to make 70 meatballs or other types of dough in one move. Chitarra pasta cutter, a traditional Abruzzese tool for making spaghetti or...

L-handle quarter turn for padlock, Stainless steel AISI 316 Emka 1000-U860

€79.90

79,90 € tax excl.

L-handle quarter turn for padlock, Stainless steel AISI 316 Emka 1000-U860

Leveling foot for iron furniture with fixing to the base 308 Camar

€1.97

1,97 € tax excl.

FEATURES: Nominal loading capacity: 400 kg Adjustment: 0-20 mm Available heights (H): 4 - 5 - 6 - 8 - 10 cm Necessary special key for adjustment One-piece steel tube and socket Article tested by CTBA...

MDF cutlery holder with three kitchen accessories, handcrafted in Abruzzo

€8.20

8,20 € tax excl.

MDF cutlery holder with three kitchen accessories: ladle, fork, spoon. Handcrafted in Abruzzo using high-quality techniques. Dimensions: Width 10.5 cm Height 16.5 cm Length 8 cm

Miniature guitar made of beech wood, Abruzzo craftsmanship

€7.21

7,21 € tax excl.

Miniature guitar made of beech wood, ideal for children's entertainment or as a decorative item for your home. Includes a mini rolling pin made of beech wood, 8 cm. Dimensions: Length 10 cm Width 15.5 cm Height...

Mortice lock 1 throw for aluminum doors and windows 903 K

€35.25

35,25 € tax excl.

FEATURES: Mortice lock for aluminum doors and windows Nickel steel front 16-20 mm wide and 156 mm long panel board Inlet sizes available: 16-21 mm Lock box Base *L mm x height 100 mm Backplate painted nickel...

Mortice lock backing hook bolt and cylinder for aluminum doors and windows 304 K

€17.36

17,36 € tax excl.

FEATURES: Lock (ambivalent to the right and left) with cylinder and 2 keys art. 91.01.75 Nickel steel front 20 mm wide and 160 mm long panel board Inlet size: 20 mm Lock box Base 36,2 mm x high 104 mm Nickel...

Mortice lock tipping bolt and cylinder for aluminum doors and windows 303 K

€42.62

42,62 € tax excl.

FEATURES: Lock (ambivalent to the right and left) with cylinder Nickel steel front 20 mm wide and 160 mm long panel board Inlet size: 20 mm Lock box Base 36,2 mm x high 104 mm Nickel backplate and steel...

Mortice lock with double bitted keys two throws and latch 220

€60.74

60,74 € tax excl.

FEATURES: Lock (ambivalent to the right and left) with reversible latch Brushed lacquered brass front 25 mm wide and 310 mm long panel board Inlet size: 70 mm Lock box Base 113 mm x high 208 mm Bolt 1C

Mortise lock with pin cylinder 1 throw for door 1500 K - Fiam - Iseo

€53.28

53,28 € tax excl.

CHARACTERISTICS: Lock (ambivalent) with cylinder Chromed steel front 21 mm wide and 120 mm long square edge Available entry sizes: 40-50-60-70 mm Box: Base *L mm x Height 57 mm Chromed steel counterplate...

Mortise lock with pin cylinder 4 throws for doors 1300 K - Fiam - Iseo

€40.98

40,98 € tax excl.

CHARACTERISTICS: (Ambivalent) mortise lock with cylinder Satin brass front 22 mm wide and 194 mm long square edge Available entry sizes: 40-50-60-70 mm Box: Base *L mm x Height 110 mm Counterplate in painted...

Oval trivet with MDF laminates, handcrafted in Abruzzo

€6.56

6,56 € tax excl.

Oval trivet made of MDF with laminates on the top and bottom, handcrafted in Abruzzo using high-quality techniques. Available with red or yellow handles. Dimensions: Length 24.5 cm (including handles) Width 19 cm

Pack of 4 articulated table legs 65S ESSE, Camar Design Series

€100.00

100,00 € tax excl.

Pack of 4 pieces Articuled legs for table, comprising screws, plates and hex wrench.Color stem embossed gray - color terminal stem frosted dark gray. DIMENSIONS: Leg height: 700 mm Leg diameter: Ø 50 mm...

Pack of 4 Click folding legs in aluminum for table

€81.15

81,15 € tax excl.

Pack of 4 Folding table leg, painted aluminium. Efficiency in 3 steps thanks to the safety lock that gives maximum stability in the support phase and with a simple click and a fluid movement without effort, the leg...

Pair of furniture hanging supports 80014 fixing with Camar screws

€2.46

2,46 € tax excl.

Pair of adjustable hanging supports (1 right / 1 left) for furniture, available colors White and Brown. FEATURES: Nominal loading capacity: 70 kg Horizontal adjustment: 25 mm Maximum vertical adjustment: 25 mm...

Pappardelle cutter rolling pin in beech wood, Abruzzo craftsmanship

€2.50

2,50 € tax excl.

Ridged rolling pin in beech wood, ideal for preparing pappardelle. Dimensions: Length 32 cm Ridge spacing 16 mm

Pasta cutting rolling pin Set 4-piece with wall-mounted holder, Abruzzese craftsmanship

€18.00

18,00 € tax excl.

Kitchen set including: Spaghetti cutting rolling pin + Tagliatelle cutting rolling pin + Wide tagliatelle cutting rolling pin + Pappardelle cutting rolling pin, all made of beechwood, and a plywood rolling pin holder....

Polypropylene tool case GT Line BOXER PEL

€120.00

120,00 € tax excl.

Polypropylene case realized with the injection molding technique. It has a modern design, with compact dimensions, high capacity and lightweight. The aluminum profile grants a further strength. Features: New...

Protection profile for sheet metal and edges EMKA 1010-01

€6.96

6,96 € tax excl.

Profile for sheet metal and edges PVC 70 ° ± 5 Shore A blackmaterial: PVC 70 ° ± 5 Shore ASurface and color: blackProduct type: edge protectionSeal type: edge protectionThe clamping edge is or up to: 4Clamping edge...

Protection profile for sheet metal and edges EMKA 1010-02 per meter

€4.44

4,44 € tax excl.

Profile for sheet metal and edges PVC 70 ° ± 5 Shore A blackin black PVC 1010-000002 reinforced with metal core

Round cooking spoon made of beechwood, handcrafted in Abruzzo

€0.85

0,85 € tax excl.

Round cooking and dairy spoon made of beechwood, handcrafted in Abruzzo using high-quality techniques. Available in 2 sizes: Small: Length 24 cm Large: Length 30 cm

Round trivet in beech wood with refractory insert

€4.10

4,10 € tax excl.

Round trivet made of beech wood with a terracotta insert, handcrafted in Abruzzo using high-quality techniques. Available with red or yellow handles. Dimensions: Length 20 cm Width 22 cm (including handles)

Screw-on 180 ° hinge 1039-U15 EMKA in galvanized steel, pin and washer in nickel-plated brass

€20.30

20,30 € tax excl.

Long screwable three-piece 180 ° hinge with 2 holes 8.4 mm in galvanized steel, pin and washer in nickel-plated brass 1039-U15 EMKA Length 91 mm, Height 55 mm

Sealing profile gasket to Z EMKA 1074-04 for glass and sheet metal

€10.66

10,66 € tax excl.

Sealing profile in NBR 80 ° Shore A for 6 mm glass and 2 mm sheet metal, with Z shape for sealing profiles

Set pasta cutter tool + rolling pin in wood, traditional kitchen tool

€13.11

13,11 € tax excl.

Side foot leveller for furniture fixed to the side panel 300 Camar

€2.05

2,05 € tax excl.

FEATURES: Nominal loading capacity: 150 kg Adjustment: 0-20 mm Necessary allen key n.6 and special key for adjustment Article tested by CTBA Components ABS, steel and zamak Measures looks image.

Load More Products

Showing 1-90 of 137 item(s)

The prices shown are reserved exclusively for online sales

Customer care

Information

STORE INFORMATION

Mancini & Mancini S.r.l
Via Cavour, 18

66020 - Sambuceto, Chieti, Italy
Open: Mon-Fri 8.30am - 12.30am/3.00pm - 6.00pm -

Sat 8.30am - 12.30am

Phone: +39 085.4408697

Email: info@shopmancini.com

Name	Provider	What it does	Expiry	Allow (Check all)
Shopping cart	Prestashop	This provides, and keeps the products inside your shopping cart. Deactivating this cookie would stop permitting the orders. This cookie doesn't save any personal Data about any shop client. This provides, and keeps the products inside your shopping cart. Deactivating this cookie would stop permitting the orders. This cookie doesn't save any personal Data about any shop client.	30 days	Allow
Language Selection.	Prestashop	Cookie we use to offer you the possibility to switch the language of our contents. If cookie is disabled you'll see the site in the original language. Cookie we use to offer you the possibility to switch the language of our contents. If cookie is disabled you'll see the site in the original language.	30 days	Allow

Name	Provider	What it does	Expiry	Allow (Check all)
Stats Data	Prestashop	A Shop Cookie, which saves data about orders, carts, IP of the clients. The data's are kept save inside the back-office, and serve solely as statistical data for improving our services and products. A Shop Cookie, which saves data about orders, carts, IP of the clients. The data's are kept save inside the back-office, and serve solely as statistical data for improving our services and products.	30 days	Allow
Google Analytics	Google	Standard tracking, which make our shop understand the necessity and places to improve our shop. Cookie last for 30 days. Standard tracking, which make our shop understand the necessity and places to improve our shop. Cookie last for 30 days.	30 days	Allow

Home

Necessary

Statistics

Settings

Search

Menu