€7.54
7,54 € tax excl.
92 mm short 11R 15 adjustable hingefor wooden doors and windowsAdjustable 0/+3 mm in height, +/- 3 mm laterally and in depth
Filter By
Filter By
Home
Filter By
€12.30
12,30 € tax excl.
Adjustable hinge 11R of 20 Long 112 mm for wooden doorsAdjustable 0/+3 mm in height, +/- 3 mm laterally and in depth
€11.64
11,64 € tax excl.
180 ° screw-on hinge in galvanized steel, pin and washer in nickel-plated brass 1055-U4 EMKA
Length 53 mm, Height 40.2 mm, Distance between mounting holes 38 mm
€0.82
0,82 € tax excl.
Standard hinge 9 in steel for furniture SFS intec
€1.90
1,90 € tax excl.
20R adjustable steel hinge 14 SFS intecfor wooden doors and windowsadjustable up to 3 mm in height
€14.75
14,75 € tax excl.
2D screw-on hinge zinc die black powder coated; pin stainless steel.
Door position: Hinges for flush doors
Installation circumstances: Prominent hinge
Hinge adjustable: Hinge adjustable 2D - 2D nut useable...
€1.00
1,00 € tax excl.
Fixing screw with flat head and slotted recess complete with zinc-plated nut.
Measures :
length 15 mm
step 6 but
screw head with diameter 8 mm, thickness 2 mm
€16.01
16,01 € tax excl.
Adjustable 11R 20 hinge with anti-theft device for wooden doors
Adjustable 0 / + 3 mm in height, +/- 3 mm laterally and in depth
The stems of the male are both rotating and self-tapping
€7.86
7,86 € tax excl.
Releasable nickel-plated steel hinge to be used as rostrum for door alignment.
Cup diameter of Ø 16.2 mm for door and the frame.
€5.74
5,74 € tax excl.
Aluminum blow gun for any use with short nozzle Working pressure: 1.0 - 6.0 bar
€8.20
8,20 € tax excl.
Aluminum blow gun for any use with 150 mm long barrel Working pressure: 1.0 - 6.0 bar
€0.99
0,99 € tax excl.
14 steel anuba hinge for doors and frames SFS intec
Used for moving doors and windows made of wood or composite materials.
€2.12
2,12 € tax excl.
Anuba hinge 14 in steel with 3 legs, sliding pin for SFS intec doors and fixtures, center distance 13.7 mm
€4.39
4,39 € tax excl.
Anuba hinge 16 in steel with 3 legs, sliding pin for SFS intec doors and fixtures, center distance 15.5 mm
€0.87
0,87 € tax excl.
Standard hinge 11 in steel for furniture SFS intec
€1.64
1,64 € tax excl.
Ball bearing wheel in PA suitable for sliding furniture drawer runners etc.
- Diameter 23 - 25 - 28 - 30 mm
€8.11
8,11 € tax excl.
Black polyamide lock with lever-tab, 1/4 turn locking, nut fixing with flat gasket and self-tapping screw.
18 mm box lock complete with 3 levers (codes: 1000-5164, 1000-U26, 1000-26).
€27.79
27,79 € tax excl.
Professional blow gun. Progressive dispensing valve with stainless steel spring Air inlet: M 1/4 ”with FF swivel connection Body: hostaform C® Barrel: 1 m foldable in shapeable copper Working pressure: 1.0 - 6.0 bar
€6.94
6,94 € tax excl.
Central hinge for door
Article 706618 nickel matt steel
Article 1272193 brassed steel
€47.13
47,13 € tax excl.
COMPLETE CRANKSET FOR ONE DOOR.
Pivot and hinge for doors in wood wire
Article 1272070 matt chrome
Article 516 543 gold
€2.01
2,01 € tax excl.
Cover for CAB-E or CIR SFS intec poised hinge adaptable invisible
€3.69
3,69 € tax excl.
Double-bit insert key 3, powder-coated black zamak Emka 1004-05
€7.38
7,38 € tax excl.
Black EPDM gasket (EPDM 65 ° ± 5 Shore A)
material: foam rubber EPDM; clamping profile EPDM 65° ± 5 Shore A Surface and colour: black Seal balloon / seal body: Yes Position sealing element: top Product type:...
€7.38
7,38 € tax excl.
material: EPDM foam; tightening profile EPDM 65 ° ± 5 Shore ASurface and color: blackSeal flask / seal body: YesPosition the sealing element: lateralType of product: sealType of gasket: self-locking clip profileThe...
€17.21
17,21 € tax excl.
Snap lock in galvanized steel, tongue and square in rough zamak, spring in galvanized steel.Door version: right, leftType of blocking system: block-blockmaterial: steelSurface and color: galvanizedInstallation...
€8.11
8,11 € tax excl.
Profile hinge zinc plated with weld-on stud raw cover stainless steel.
Door position: Hinges for prominent doors
Arrangement of cabinets: Hinge for single cabinets
Installation circumstances: Prominent hinge...
€8.93
8,93 € tax excl.
Button closure in chrome-plated zamak without seal.
€8.03
8,03 € tax excl.
120° hinge for screw-on fastening for 20 mm door return.
Door position: Hinges for prominent doors
Arrangement of cabinets: Hinge for single cabinets
Installation circumstances: Concealed hinge
Opening angle:...
€12.91
12,91 € tax excl.
135 ° hinge with stop for 20/25 mm doors
€17.21
17,21 € tax excl.
Latch of gray Makrolon, box and flap Delrin gray, gray POM spring.
€676.23
676,23 € tax excl.
Fein FSN400 Multifunction Tool with Speed Controller
Equipment
FSN400 Multifunction Tool
Hand and machine protection bracket
Tool fixing screw
2-hole nut wrench
Sharpening stone
€490.98
490,98 € tax excl.
Fein WPO 14-15 E angle polisher, with anti-vibration handle and speed regulator
€7.95
7,95 € tax excl.
Connector in black PP, package 10 pcs.
For wooden axis for bed nets, armchair and sofa support.
Measurements:
A= 25 mm
B= 26,5 mm
C= 76 mm
D= 8 mm
€8.93
8,93 € tax excl.
Double Connector in black PP, package 10 pcs.
For wooden axis for bed nets, armchair and sofa support.
Measurements:
A= 25 mm
B= 69 mm
C= 76 mm
D= 8 mm
€5.74
5,74 € tax excl.
Oval key in nickel, Fiat type in die-cast metal, length 6 cm.
€16.31
16,31 € tax excl.
180° Screw-on torque hinge zinc-die black powder-coated for countersunk screw M5; friction cone polyacetal POM; screw and nut m.s. zinc-plated.
Adjustable torque
Holds any position continuously at adequate load...
€0.87
0,87 € tax excl.
Hinge anuba steel 13 article 20 SFS intec
€121.23
121,23 € tax excl.
Reversible overlapping hinge to screw in 316 stainless steel with 4mm height adjustment, washer and pin in stainless steel
EMKA 1054-U39
€8.61
8,61 € tax excl.
Wood roughener disc for steel thickness 0,5 mm, Ø 115.
€21.23
21,23 € tax excl.
Pneumatic inflating gun body in shockproof nylon - Manometer diameter mm. 63 - Tube length mm. 400 - Brass head
€27.87
27,87 € tax excl.
COMPLETE SET FOR ONE DOOR.
Hinge and pivot for flush wooden doors
article 632684 tropical steel
Load capacity per pair 70 kg
€9.84
9,84 € tax excl.
Cap with insertion inside the tube with thread on low-flow plastic
IRAF - Round PE finned tips with 10MA thread
Outer diameter of the tube: 20-25-30-32-35-40-50mm
€3.34
3,34 € tax excl.
CORDLESS MULTI FOR ROTARY DRILLING ONLY - NO HAMMER/PERCUSSION drill bits are ideal for drilling the most common materials, including: brickwork, breeze block, wood, dry wall, slate, plastics, sheet metal. Unique...
€31.97
31,97 € tax excl.
DIAMOND - COOL WATER - NO PERCUSSION for fast, smooth cutting in all grades of hard and soft tiles.
Drilling with water increases the lifespan of the tool. Do not press strongly on the tool, let it work. Make a...
€5.39
5,39 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite. Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill bits....
€18.20
18,20 € tax excl.
CORDLESS MULTI is able of drilling wide selection of materials: brick, marble, metal, tile, slate, gypsum, limestone, hard plastic, wood, cast iron and hardened steel.Plastic box of 5 pieces with bits 4 - 5 - 6 - 8 -...
€25.33
25,33 € tax excl.
GRANITE ROTARY PERCUSSION For percussion drilling in very hard materials such as granite.Extremely hard and wear resistant carbide tip guarantees up to 40% more holes compared to conventional masonry drill...
€9.20
9,20 € tax excl.
BLUE GROOVE 4X Four times faster than the basic flat drill bits double Cutting Spurs scribe outside of the hole, reducing breakout.
Thicker Cutting Edge for longer drilling life. Bluegroove Point & Cutting Edge...
€10.88
10,88 € tax excl.
TCT - CARBIDE TIP pierce hardened material up to 50HRC. 4 cutting edges for perfect centering and less pierce pressure.
Design ground flute to facilitate removal of the chips.Web in chrome-vanadium steel, quenched...
€3.26
3,26 € tax excl.
TURBOMAX HSS is designed primarily for high performance drilling in sheet metal but performs well in all types of wood and plastic. Suitable for drilling stainless steel however, HSS Cobalt products are designed...
€4.10
4,10 € tax excl.
Key EK 333, nickel silver with black polamide head for EMKA locks.
€9.84
9,84 € tax excl.
Key for insert Square 9, railway version, Zinc die black powder-coated.
€2.87
2,87 € tax excl.
Key for insert square 6 mm, Zinc die black powder-coated.
€3.28
3,28 € tax excl.
Key for insert square 7 mm, Zinc black powder-coated.
€4.10
4,10 € tax excl.
Key for insert triangular 10 mm, Zinc black powder-coated.
€3.28
3,28 € tax excl.
Key for insert triangular 7 mm, Zinc black powder-coated.
€3.69
3,69 € tax excl.
Key for insert triangular 8 mm, Zinc black powder-coated.
€79.90
79,90 € tax excl.
L-handle quarter turn for padlock, Stainless steel AISI 316 Emka 1000-U860
€9.84
9,84 € tax excl.
The lock for multiple lockings with double tongue and blade mechanism has a central rotor with 5 blades placed inside a zinc alloy box called stator, bushing or body. The double flange is drilled to allow the lock to...
€8.20
8,20 € tax excl.
Lockable handle length 28 mm in zinc alloy suitable for the insertion of 30 and 40 mm hook padlocks (5-7 mm shackle diameter). Thanks to the various lengths of the lockable cylinder, it is possible to apply it on both...
€42.94
42,94 € tax excl.
COMPLETE CRANKSET FOR ONE DOOR
Adjustable hinge and pivot for flush wooden doors
article 1272272 galvanized
€1.23
1,23 € tax excl.
Key type TRG Small in plastic.
Measures looks image.
€5.74
5,74 € tax excl.
Small universal spanner lock with cam 43 mm in die-cast metal . Cam with screw, washer and nut. Cam not assembled.
Key rotation 90 ° - 2 extractions
Measures looks image.
€8.03
8,03 € tax excl.
Spanner lock with flap single horizontal and control 30 mm DK for drawer unit, in die-cast metal. Nickel body. Equipped with 2 brass keys SCHG05082, control 30 mm DK and nickel finishing ferrule.
Measures looks image.
€3.69
3,69 € tax excl.
Universal spanner lock imprint closure Fiat with lever 43 mm, in die-cast metal. Nickel body. Equipped with lever Q7 int. 43 and nut.
Key rotation 90 ° - 2 extractions
Measures looks image.
€4.92
4,92 € tax excl.
Universal spanner lock square head with flat lever 30 mm KD, in die-cast metal. Nickel body. Equipped with 2 brass keys SCHG05082, lever Q7 int. 40 and nut.
Key rotation 90 ° - 1 extraction
Measures looks image.
€98.36
98,36 € tax excl.
Tank - Nylon 680 cc Body - Nickel-plated sandblasted brass Cap - Nickel-plated brass Needle / Springs / Nozzle - Stainless Steel Adjustments - Product / range Weight 780 g Operating pressure 3.0 - 3.5 bar Air...
€8.20
8,20 € tax excl.
The 1/4 turn triangular impression lock with adjustable cam is composed of a zinc alloy body inside which there is a spring-loaded rotor that, moved by a key, rotates determining the opening or closing. A 74 mm iron...
€5.74
5,74 € tax excl.
Oval key in nickel, Fiat type in die-cast metal, length 6 cm.
€8.20
8,20 € tax excl.
Lock for mailboxes in die-cast metal. Black painted ferrule, nickel rotor. Equipped with 2 brass keys SCHG05082, lock yoke and cranked lever Q7 int. 34 .
Key rotation 90 ° - 1 extraction
Measures looks image.
€20.49
20,49 € tax excl.
Black plastic swing door lock with 2 keys, snap-fit. Key rotation 90° - 2 extractions Handle Rotation 90° Clockwise/Counterclockwise Available with black case and grey handle Measurements as per pictures.
€14.67
14,67 € tax excl.
COMPLETE KIT FOR ONE DOOR (1 left hinge + 1 right hinge)
Hinge and pivot for flush wooden doors
article 954008 matt nickel-plated steel
article 1272496 brass-plated steel
Load capacity per pair 50 kg
€5.66
5,66 € tax excl.
Slatted oval. 90° clockwise rotation, 2 key extractions (open/closed). Die-cast metal material.
Finishing: nickel-plated rotor, black painted bushing
Supplied accessories:
2 brass keys SCHG05082
Sling bar with 2...
€17.46
17,46 € tax excl.
Professional blow gun. Progressive dispensing valve with stainless steel spring Air inlet: M 1/4 ”with FF swivel connection Body: hostaform C® Barrel: 150 mm curved Working pressure: 1.0 - 6.0 bar
€6.96
6,96 € tax excl.
Profile for sheet metal and edges PVC 70 ° ± 5 Shore A blackmaterial: PVC 70 ° ± 5 Shore ASurface and color: blackProduct type: edge protectionSeal type: edge protectionThe clamping edge is or up to: 4Clamping edge...
€4.44
4,44 € tax excl.
Profile for sheet metal and edges PVC 70 ° ± 5 Shore A blackin black PVC 1010-000002 reinforced with metal core
€33.00
33,00 € tax excl.
QIA - Square finned tips in PE - Cross finning 45x45 in blister of 100 pieces
A= 21
B= 5
EXTRA DISCOUNT FOR QUANTITIES FROM 1000-2000 Pz
€16.00
16,00 € tax excl.
QIA - Square finned tips in PE - Cross finning 25x25 in blister of 100 pieces
A=20
B= 6
EXTRA DISCOUNT FOR QUANTITIES FROM 1000-2000 Pz
€19.00
19,00 € tax excl.
QIA - Square finned PE tips - Cross finning 30x30 in blister of 100 pieces
A=19
B= 5
EXTRA DISCOUNT FOR QUANTITIES FROM 1000-2000 Pz
€24.00
24,00 € tax excl.
QIA - Square finned PE tips - Cross finning 35x35 in blister of 100 pieces
A= 18
B= 6
EXTRA DISCOUNT FOR QUANTITIES FROM 1000-2000 Pz
€28.00
28,00 € tax excl.
QIA - Square finned ends in PE - Cross finning 40x40 in blister of 100 pieces
A= 18
B= 6
EXTRA DISCOUNT FOR QUANTITIES FROM 1000-2000 Pz
€40.00
40,00 € tax excl.
QIA - Square finned PE tips - Cross finning 50x50 in blister of 100 pieces
A= 21
B= 6
EXTRA DISCOUNT FOR QUANTITIES FROM 1000-2000 Pz
€13.00
13,00 € tax excl.
QIA - Square finned PE tips 20x20 in blister of 100 pieces
A= 17
B= 5
EXTRA DISCOUNT FOR QUANTITIES FROM 1000-2000 Pz
€19.00
19,00 € tax excl.
QIA - Square finned PE tips 30x30 in blister of 100 pieces
A= 19
B= 5
EXTRA DISCOUNT FOR QUANTITIES FROM 1000-2000 Pz
€24.00
24,00 € tax excl.
QIA - Square finned PE tips 35x35 in blister of 100 pieces
A= 21
B= 6
EXTRA DISCOUNT FOR QUANTITIES FROM 1000-2000 Pz
€40.00
40,00 € tax excl.
QIA - Square finned PE tips 50x50 in blister of 100 pieces
A= 21
B= 6
EXTRA DISCOUNT FOR QUANTITIES FROM 1000-2000 Pz
€16.00
16,00 € tax excl.
QIA - Winged square tips in PE 25x25 in blister of 100 pieces
A= 17
B= 5
EXTRA DISCOUNT FOR QUANTITIES FROM 1000-2000 Pz
Showing 1-90 of 191 item(s)
Italiano
Français
Deutsch
Español